Saprolitic nickel laterite is characterized by relatively low iron and nickel contents. Iron and nickel oxides are reduced to form fine ferronickel particles that disperse and embed in silicates in the reduction process, limiting the application of magnetic separation to extract ferronickel. Additives are applied to promote the aggregation and growth of ferronickel particles, then the large ferronickel particles will be separated by fine grinding and recovered via magnetic separation. Calcium sulphate is considered to be capable of increasing the size of ferronickel particles considerably. Due to the decomposition of calcium sulphate in the reduction process, the mechanism of calcium sulphate on the aggregation and growth of ferronickel particles should be conducted studied in-depth. The current work explores the effects of calcium sulphate, elemental sulphur, and calcium oxide on the formation of ferronickel particles in a saprolitic nickel laterite ore. The results showed that the formation of an Fe-FeS eutectic and the mineral structure transformation contributed by calcium oxide were all conducive to the mass transfer of ferronickel particles in gangue, ferronickel particles aggregated and grew up at the boundary between the hole and the gangue. The self-reduction, fine grinding, and magnetic separation of nickel laterite ore in the presence of three types of additive were examined. Nickel laterite ore with 7.88 wt% coal, 12 wt% calcium sulphate reduced at 1200 °C for 30 min, a ferronickel concentrate of Ni 8.08 wt%, and Fe 79.98 wt% was obtained at a nickel and iron recovery of 92.6% and 79.9%, respectively.
1 December 2022 in Journal of Physics: Conference Series
Due to its unique advantages of small size, high power density, and high efficiency, high-speed asynchronous motor (HSAM) has been widely used in aerospace, high-speed air compressor, and other advanced manufacturing equipment. Based on a developed finite element model validated by a prototype motor testing platform, the influence of stators made of different magnetic materials on the efficiency of the HSAM with a rated speed of 7500 rpm has been systematically investigated. Hereinto, the magnetic materials are silicon steel, Fe-based amorphous alloy, and SMC. Compared with silicon steel, the iron loss of HSAM can be significantly reduced by 91.1% using the stator made of Fe-based amorphous alloy in the frequency range of 0-800 Hz, while the SMC motor exhibits an advantage in lower loss when the frequency over 157.28Hz.