30 June 2020 in KSCE Journal of Civil Engineering
In the case of sudden surcharge loading, shallow shield tunnels in areas with soft soil experience substantial deformation responses. It is very important to understand the different loading modes and control measures above the shallow shield tunnels in soft soil for improving the safety of tunnel structure and reducing the influence of deformation. In this study, a three-dimensional numerical model of shallow shield tunnels in soft soil is established with FLAC. Ground and tunnel deformations are analyzed under different loading modes, and the effects of different deformation control measures are also studied. The numerical simulations in this paper show that the surface and tunnel deformation responses vary when induced by different loading modes above shallow shield tunnels in soft soil. After surface hardening with a 20-cm-thick layer of C20 concrete, the surface settlement is effectively controlled, and the uneven longitudinal settlement of the tunnel vault is improved. However, controlling the height of the surcharge is the most direct deformation control method. When the height of the surcharge is reduced from 6 m to 4 m and 2 m, the maximum ground settlement is reduced by 37.8% and 69.4%, respectively, and the maximum longitudinal settlement of the tunnel vault is reduced by 35.3% and 65.2%, respectively. During the operation of shallow shield tunnel in soft soil area, sudden surcharge loading should not be allowed. In the inevitable case, the surcharge loading on one side of the tunnel should be prevented and the surcharge loading height should be strictly limited.
30 November 2024 in Construction and Building Materials
20 September 2024 in Acta Geotechnica
22 May 2023 in IEEE Transactions on Instrumentation and Measurement
Microchip electrophoresis (ME) is an ion detection system with low cost and portability, which is suitable for online analysis of environmental samples. However, the unresolved peaks in the detection signal of complex samples seriously affect the measurement accuracy of sample concentration. In this paper, an efficient unresolved peaks analysis algorithm is proposed, which is based on the Sigmoidal membership function, Lévy flight, and Slime Mould Algorithm (SLSMA). First, the hyperbolic tangent function in the original Slime Mould Algorithm (SMA) is replaced by the Sigmoidal membership function to enhance the global optimization capability. Second, we use the Lévy flight sequences to further enhance the convergence speed of the SMA algorithm. Then, the performance of SLSMA is tested using synthetic peaks with different resolutions and noise levels. Finally, ME peaks are used to further validate the application of the proposed algorithm. The results show that the proposed algorithm has higher computational efficiency and can be used for the analysis of ME peaks.
26 May 2023 in Natural Hazards