2 December 2021 in IEEE Transactions on Electron Devices
In this article, we investigate the self-heating effect (SHE) of the Complementary FET (CFET) device and propose a cross-coupled thermal network model. For the investigation of thermal behavior, the intra- and inter-device crosstalk of CFET is evaluated qualitatively through the defined crosstalk coefficient. The results indicate that CFETs have more severe intra-device thermal crosstalk, almost twice that of CMOS. Moreover, the vertical structure makes the heat dissipation path of CFET devices significantly different in the two transition states (inputs ``1'' and ``0''). Based on the thermal behavior characteristics of CFET and the necessity of high-precision and rapid prediction of thermal characteristics of the devices, a thermal network model is proposed, which can quickly respond to the heat source and be extended at the array level. In the last part, we analyze the influence of load capacitance and operating frequency on the self-heating of CFET, and SHE-related reliability lifetime is predicted based on the lattice temperature obtained from the thermal network. The prediction results show that the bias temperature instability (BTI) lifetime of CFET degrades by 84% compared with standard CMOS.
1 December 2020 in IEEE Electron Device Letters
Conduction mechanisms of ferroelectric tunnel junction (FTJ) using metal-ferroelectric-insulator-semiconductor (MFIS) on n- and p-type semiconductor is clarified by a new developed model, which is verified by the experimental results. In the model, electron tunneling from conduction band and valence band, and hole tunneling from valence band are included to calculate the read current in ON/OFF-state of MFIS-FTJ. The model explains the unexpected polarization polarity of ON/OFF-state in p-type and the difference of tunneling electroresistance (TER) ratio between n- and p-type MFIS-FTJ, which cannot be understood just by the depletion/accumulation for majority carriers in semiconductor.
21 May 2021 in IEEE Transactions on Electron Devices
Tunneling processes of ferroelectric tunnel junction (FTJ) based on metal-ferroelectric-insulator-semiconductor (MFIS) stack are studied for both n- and p-type semiconductor electrodes using experimentally calibrated model. In the model, the calculation of ON- ( J mathrm ON ) and OFF-current ( J mathrm OFF ) in MFIS-FTJ considers the electron tunneling from both conduction (CBE) and valence band (VBE), and hole tunneling from the valence band (VBH). Depending on metal work function, doping concentration and remnant polarization, the conduction modes in both n- and p-type MFIS can respectively be classified according to the contribution of minority carriers in semiconductor. The optimal tunneling electroresistance (TER) ( ≈ J mathrm ON /J mathrm OFF ) for the n-type device is achieved, when semiconductor works under depletion/accumulation state driven by polarization reversal. With respect to its p-type counterpart, the accumulation/strong inversion state is preferable. The underlying physics are revealed, that if semiconductor goes into the strong inversion, the tunneling of VBH will increase the J mathrm OFF and decrease the TER ratio in n-type device, whereas the tunneling of CBE will increase the J mathrm ON and thus TER ratio in p-type device. Guided by the model, the band structure engineering of MFIS structure is provided to design and optimization of FTJ performance.
26 September 2014 in Semiconductor Science and Technology
21 February 2019 in Science China Information Sciences
1 January 2011 in Communications in Computational Physics
A Finite Volume Method for the Multi Subband Boltzmann Equation with Realistic 2D Scattering in Double Gate MOSFETs - Volume 10 Issue 2 - Tiao Lu, Gang Du, Xiaoyan Liu, Pingwen Zhang