Sankar Peddapati

Sankar Peddapati

Auto-generated profile, based on publicly available information

Sankar Peddapati

Department of Electrical Engineering, National Institute of Technology Andhra Pradesh, Tadepalligudem, India

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 December 2021 in IEEE Access
Verified
Journal Article
Open access
SNSVK Naresh
SVK Naresh
SPSankar Peddapati
Sankar Peddapati
MAMamdouh L. Alghaythi
Mamdouh L. Alghaythi
This paper introduces the concept of inductors asymmetric input voltage to derive a new high voltage gain converter. The proposed converter has continuous input, positive output, and high-power density features suitable for renewable energy applications. The operating principle, steady-state performance, practical voltage gain, small-signal analysis, and efficiency of the converter are presented in this work. A comprehensive comparison is made with the high voltage gain converters available in literature in terms of component count, voltage gain, effectiveness index, voltage and current stress on the power devices, per unit switching device rating, and other features like output polarity and availability of common ground. The proposed topology possesses a higher effectiveness index and lower switching device power rating (SDP), resulting in a good form factor. To validate the performance of the proposed converter, the experiments are conducted on the 150 W laboratory prototype, and corresponding results are presented in this work.

23 February 2023 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
Verified
Journal Article
Closed access
SNSVK Naresh
SVK Naresh
SPSankar Peddapati
Sankar Peddapati
MAMamdouh L. Alghaythi
Mamdouh L. Alghaythi
This work has adopted the concept of asymmetric inductor magnetization to develop a new quadratic converter with the advantages like a wide range quadratic voltage gain and low source current ripple. In addition, the proposed high quadratic converter has achieved reduced voltage stress due to the presence of switched capacitor cell at the output side. Initially, the operation of the converter and steady-state analysis, including efficiency calculations, are explained. In addition, the design and selection of converter components are presented along with a small-signal analysis. Further, a comprehensive comparison with recent high quadratic gain converters is presented. The comparison is made with regard to the total component count, voltage conversion ratio, effectiveness index, electric stress, current ripple, switching device power (SDP) rating, and input current ripple factor. Furthermore, the 150 W laboratory prototype is used to verify the performance of the proposed converter in terms of operation, dynamic response, and efficiency, and the corresponding experimental findings are reported. The wide range voltage gain, low current ripple, and low electric stress features of the proposed converter highlight its superiority in fuel cell electric vehicle applications.

8 February 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
SPSankar Peddapati
Sankar Peddapati
VKV. S. Prasadarao K
V. S. Prasadarao K
A new fault-tolerant (FT) multilevel inverter (MLI) structure that can tolerate the faults on the switches and sources is introduced in this article. The presence of redundant states in the proposed structure ensures the FT capability, which is an important requirement for emergency loads. Initially, the operation of the proposed FTMLI for fault-free and different fault conditions under symmetric and asymmetric source configurations is discussed. Furthermore, this article explores the ability of the proposed topology operating at different voltage levels in positive and negative half cycles of the output voltage to improve the reliability of the system. For this case, the modified pulsewidth modulation control strategy ensuring minimized lower order harmonics and zero dc offset is presented. The feasibility of the proposed topology is verified through simulation and experimental studies. Lower total standing voltage, reduced switch count, higher efficiency, and improved reliability are the key features of the proposed topology. A comprehensive evaluation and comparative study are performed to evaluate the performance of the proposed MLI over other structures.

13 December 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
VPV. S. K. Prasadarao
V. S. K. Prasadarao
SPSankar Peddapati
Sankar Peddapati
BKBalram Kumar
Balram Kumar
This article introduces a novel Switched-Capacitor Multilevel Inverter (SCMLI) that offers a minimum number of components. The inverter generates a seven-level output waveform across the load by utilizing a single DC source, two capacitors with a rating of half the input voltage, and nine semiconductor switches. The key features of this proposed SCMLI include voltage boosting ability (up to 1.5 times the input voltage), reduced device count, absence of bidirectional switches, self-balancing of capacitors, and lower Total Standing Voltage (TSV). The paper presents a detailed analysis covering the operating principles, capacitor voltage balancing, and control strategy. Comprehensive evaluations such as power loss, efficiency analysis, cost function per level ( CF/Nl ), and switching device power (SDP) ratings are also provided. The steady-state and dynamic performance of the proposed topology are verified through simulation studies using MATLAB/SIMULINK software, and experimental studies validate the results. Furthermore, the article includes a comparative study between the proposed SCMLI and other recently introduced multilevel inverters. Finally, the performance of the proposed topology for single-stage grid connected photovoltaic (PV) system has been verified and corresponding results are presented.

3 March 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
VKV S Prasadarao K
V S Prasadarao K
SPSankar Peddapati
Sankar Peddapati
SNSVK Naresh
SVK Naresh
Generating higher voltage levels with fewer power electronic components and fault tolerance is a challenging issue for multilevel inverters (MLIs). In this article, a new generalized fault tolerant MLI (FTMLI) with reduced semiconductor switches is presented. The proposed FTMLI topology contains more redundant switching states; thus, the topology can tolerate faults in both switches and/or sources. This article also introduces the new level shifted carrier pulsewidth modulation technique in effective utilization of abnormal voltage level combinations (or skipped voltage level) for running emergency loads. The proposed topology's operation is discussed along with the fault-tolerant capability for both the symmetric and asymmetric modes. Experimental results are presented to show the effectiveness of the FTMLI topology using the associated control strategy. A comparative analysis between the proposed topology and other MLI topologies is also provided to highlight the proposed topology's merits.

17 September 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
SNSurla Vishnu Kanchana Naresh
Surla Vishnu Kanchana Naresh
HSHussain Shareef
Hussain Shareef
BKBalram Kumar
Balram Kumar
SPSankar Peddapati
Sankar Peddapati
Recent advancements in dc microgrids demand high-gain dc–dc converters for efficient energy conversion. In this regard, this article proposes a family of five new quadratic boost converters based on the extended capacitor–diode network. All the proposed converters have the ability to produce wide-range voltage gain with continuous source current features, which makes them an interesting choice for microgrid applications. This work conducts a detailed operational, steady-state, and control analysis of the proposed converters. Further, the comparison studies with existing converters highlight the superiority of proposed converters in terms of the high voltage gain, low electric stress, and high switch utilizing factor. Furthermore, 500 W, 400 V, and 50 kHz laboratory prototypes are fabricated to evaluate the practical feasibility, and corresponding experimental results are presented. For the given design, the converter proposed converter (PC) I exhibited a better efficiency of 94.3%, followed by the efficiencies of PC II, PC III, PC V, and PC IV are 93.9%, 94%, 92.5%, and 93.1%, respectively.