GaN technology is not only gaining traction in power and RF electronics but is also rapidly expanding into other application areas including digital and quantum computing electronics. This paper provides a glimpse of future GaN device technologies and advanced modeling approaches that can push the boundaries of these applications in terms of performance and reliability. While GaN power devices have recently been commercialized in the 15–900 V classes, new GaN devices are greatly desirable to explore both higher-voltage and ultra-low-voltage power applications. Moving into the RF domain, ultra-high frequency GaN devices are being used to implement digitized power amplifier circuits, and further advances using the hardware–software co-design approach can be expected. On the horizon is the GaN CMOS technology, a key missing piece to realize the full-GaN platform with integrated digital, power, and RF electronics technologies. Although currently a challenge, high-performance p-type GaN technology will be crucial to realize high-performance GaN CMOS circuits. Due to its excellent transport characteristics and ability to generate free carriers via polarization doping, GaN is expected to be an important technology for ultra-low temperature and quantum computing electronics. Finally, given the increasing cost of hardware prototyping of new devices and circuits, the use of high-fidelity device models and data-driven modeling approaches for technology-circuit co-design are projected to be the trends of the future. In this regard, physically inspired, mathematically robust, less computationally taxing, and predictive modeling approaches are indispensable. With all these and future efforts, we envision GaN to become the next Si for electronics.
29 July 2024 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Design automation of analog circuits has long been sought. However, achieving robust and efficient analog design automation remains challenging. This article proposes a learning framework, RoSE-Opt, to achieve robust and efficient analog circuit parameter optimization. RoSE-Opt has two important features. First, it incorporates key domain knowledge of analog circuit design, such as circuit topology, couplings between circuit specifications, and variations of process, supply voltage, and temperature, into the learning loop. This strategy facilitates the training of an artificial agent capable of achieving design goals by identifying device parameters that are optimal and robust. Second, it exploits a two-level optimization method, that is, integrating Bayesian optimization (BO) with reinforcement learning (RL) to improve sample efficiency. In particular, BO is used for a coarse yet quick search of an initial starting point for optimization. This sets a solid foundation to efficiently train the RL agent with fewer samples. Experimental evaluations on benchmarking circuits show promising sample efficiency, extraordinary figure-of-merit in terms of design efficiency and design success rate, and Pareto optimality in circuit performance of our framework, compared to previous methods. Furthermore, this work thoroughly studies the performance of different RL optimization algorithms, such as deep deterministic policy gradients (DDPGs) with an off-policy learning mechanism and proximal policy optimization (PPO) with an on-policy learning mechanism. This investigation provides users with guidance on choosing the appropriate RL algorithms to optimize the device parameters of analog circuits. Finally, our study also demonstrates RoSE-Opt’s promise in parasitic-aware device optimization for analog circuits. In summary, our work reports a knowledge-infused BO-RL design automation framework for reliable and efficient optimization of analog circuits’ device parameters. Code implementation of our method can be found at https://github.com/xz-group/RoSE.
22 January 2015 in IEEE Transactions on Microwave Theory and Techniques
All-digital outphasing transmitter architecture using multidimensional power coding (MDPC) is proposed for noncontiguous concurrent multiband transmission with a high power efficiency. MDPC transforms multiband digital baseband signals into multibit low-resolution digital signals that drive switching-mode PAs. A prototype digital outphasing transmitter consists of two 1-GHz bandwidth GaN Class-D PAs and a Chireix power combiner. The two GaN PAs are driven by bipolar radio frequency (RF) pulse-width modulation (PWM) signals, which are transformed from a concurrent dual-band LTE signal by MDPC. The dual-band LTE signal with 15-MHz aggregate channel bandwidth at 240 and 500 MHz frequency band is transmitted with -30 and -37 dBc out-of-band emissions, respectively. Digital outphasing achieves more than two times higher coding efficiency than conventional concurrent dual-band digital transmitters with the same PAs in Class-S operation. Measured power coding efficiencies of 35.4% and 47.1% are observed with outphasing bipolar and 3-level RF PWM signals respectively, which are encoded from the dual-band LTE signal.
17 August 2018 in IEEE Transactions on Microwave Theory and Techniques
Contiguous/noncontiguous carrier aggregation (CA) is one of the key features from 4G systems, which is expected to be evolved within 5G technologies. Thus, there is a need for the development of flexible, agile, and reconfigurable radio transceivers with a native support for the integration of multiple bands and multiple standards. All-digital radio-frequency (RF) transmitters have demonstrated promising potential to the design of next-generation RF transceivers. However, the simultaneous multiband transmission is still one of the key limitations of current approaches. To address this problem, this paper presents a fully digital and parallel architecture that enables the real-time design of agile and concurrent triple-band transmission. The proposed architecture is suitable for both contiguous and noncontiguous CA scenarios and considerably surpasses the state of the art in terms of frequency agility, maximum spacing between bands, and aggregated bandwidth. To enhance the system performance, an extension to a multilevel architecture based on the analog combination of pulsed waveforms is also demonstrated. Both architectures (two and seven levels) were implemented in a field-programmable gate array. Measurement results in terms of signal-to-noise ratio, error-vector magnitude, and adjacent-channel power ratio are presented and discussed. In Implementation-I, the two-level architecture presents a frequency agility from 0.1 to 2.5 GHz (with a frequency resolution of 4.88 MHz) with an aggregated bandwidth of 56.26 MHz. In Implementation-II, the seven-level design presents a frequency agility from 0.1 to 2 GHz (with a frequency resolution of 3.906 MHz) with an aggregated bandwidth of 112.5 MHz.
Concurrent multi-band delta-sigma modulation (CMB-DSM) with out-of-band noise cancellation is presented for the first time. A scaled replica modulator creates anti-phased quantization noise for multi-band noise cancellation, consequently reducing adjacent channel leakage and significantly relaxing the design of a multi-band RF filter to suppress undesirable out-of-band emission. A prototype digital transmitter is designed with 6th-order CMB-DSM using a loop filter with stability compensation. Experimental results show that the proposed noise cancellation technique achieves more than 15-dB suppression on the out-of-band quantization noise with LTE inter-band carrier aggregation (CA) on 856 MHz and 1450 MHz bands with 40-MHz aggregated channel bandwidth.
In this paper, we propose an efficient system approach to improve the power efficiency of dual-input Doherty power amplifier (DIDPA) with maintaining its linearity level. An auto-tuning process based on a hybrid heuristic search control (HHSC) is applied to optimally define DIDPA configuration by optimizing its free parameters. Digital predistortion (DPD) is then integrated to linearize DIDPA using an optimal reduced-complexity model based on the segmentation approach. An optimal pruning process of the free parameters, based on hill-climbing (HC) heuristics, is proposed to reduce the HHSC complexity in order to refine the optimal DIDPA configuration. The system approach has been approved by experimental results, in different scenarios, using an LTE 20 MHz signal with a PAPR of 8 dB. DPD linearization under optimal DIDPA configuration improved linearity using a low-complex model with only 30 coefficients, which exhibited an error vector magnitude (EVM) of 2.5% and an adjacent channel power ratio (ACPR) of −50 dB at an averaged output power of 34 dBm. By updating the cost function coefficients and pruning the free parameters, DIDPA exhibited an EVM of 3%, an ACPR of −50 dB, and a drain efficiency of 47% at an average output power of 39 dBm.