Bidirectional switches are widely utilized in power applications, especially in AC-AC matrix converters and solid-state circuit breakers. This work demonstrates a GaN-based monolithically integrated bidirectional switch featuring a dual-gate HEMT, and drivers fabricated on the same chip. The experimental results, including both static and transient characteristics of the proposed bidirectional GaN switch, demonstrate high-temperature stability up to 250 °C. The operating frequency has been enhanced to 1 MHz at 10 V. High-temperature operation up to 250 °C as a ±311 V AC power chopper at 1 kHz is reported for the first time to the best of our knowledge. These significant potential enables the development of a high-frequency, high power density power conversion system.
This Letter presents tri-gate GaN metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMTs) with improved high-temperature performance for a monolithic integration platform, utilizing a low-damage digital recess technique. The fin structure followed by the multiple cycles of plasma oxidation and wet oxide removal process enables threshold voltage modulation from −9.1 V (D-mode) to +1.1 V (E-mode) in MIS-HEMTs, achieved by tuning the fin width between 800 and 56 nm on the same wafer. The E-mode device shows a low subthreshold swing of 76 mV/dec, a low on-resistance of 8.2 Ω·mm, and a low hysteresis of 26 mV. The E-mode device exhibits a small threshold voltage (Vth) shift of −0.13 V from room temperature up to 200 °C leading to logic inverters of stable characteristics with an inverter threshold voltage shift of only 0.16 V from 25 to 250 °C. These results validate the monolithic integration of tri-gate GaN to be promising for high-frequency and compact mixed-signal systems.
30 September 2025 in IEEE Journal of the Electron Devices Society
The paper demonstrates a GaN/Si hetero-structure integration of complementary logic inverter for power conversion, combining a GaN n-channel high-electron-mobility transistor (HEMT) and a Si p-channel metal-oxide-semiconductor field-effect transistor (MOSFET). The implementation of high-uniformity GaN HEMT by hydrogen treatment technology. The results show that n-FET and p-FET with the matched threshold voltage (n/p ratio = 1.7/–2.1 V), drain output current (139/–26 mA/mm) and on-state resistance (15.6/43.7 Ω∙mm). The complementary inverter (CL) achieves rail-to-rail output, low static current and fast switching performance (5 MHz). Enabled by a GaN/Si gate driver and a GaN power device of 5.6 A, the design further demonstrates 48-V-to-4.8-V floating buck conversion at MHz-level. This GaN-Si complementary circuit integration overcomes the limitations of single-material solutions for high switching frequency and high-power applications, validating its potential for future monolithic integration in power electronics.
This work demonstrates an enhancement-mode (E-mode) GaN monolithic bidirectional switch (MBDS) with blocking voltage exceeding 2.9 kV at both terminals which is realized by applying in-situ gate oxygen plasma treatment (GOPT). This method significantly improves the gate’s voltage withstand capability, reduces gate leakage current, and lowers the overall device leakage in the off-state, enabling a high blocking voltage. The GOPT GaN MBDS exhibits symmetric output characteristics in both directions with threshold voltage ($V$ ${}_{\text {TH} }$ ) of 1.1 V and a specific on-resistance ($R$ ${}_{\text {ON}\textbf {, {SP}}}$ ) of 8.6 m$\Omega $ $\cdot $ cm${}^{{2} }$ which is lower than the performance limit of BDS composed of two discrete devices. The device shows a competitive trade-off between $R$ ${}_{\text {ON}\textbf {, {SP}}}$ and BV, offering an efficient solution for high-voltage power electronics applications.
17 April 2026 in IEEE Transactions on Electron Devices
This article reports the monolithic integration of gallium nitride (GaN)-based complementary logic (CL) circuits using MIS-gated $p$ /$n$ -FETs on a $p$ -GaN/UID-GaN/AlGaN/GaN platform. By employing a bilayer gate dielectric stack (2 nm PEALD AlON/18 nm ALD Al2O${}_{{3}}\text {)}$ , the MIS-gated $n$ -FET achieves enhanced gate breakdown and negligible leakage over a wide ${V}_{\text {GS}}$ range (−2 to 10 V). Time-dependent dielectric breakdown (TDDB)-based lifetime modeling predicts a maximum operating ${V}_{\text {GS}}$ of 6.75V for 10-year reliability. Furthermore, the optimized $p$ -FET exhibits a high ${I}_{\mathrm {on}}$ /${i} _{\mathrm {off}}$ ratio exceeding $10^{{8}}$ , an enhancement-mode (E-mode) threshold voltage (${V}_{\text {TH}}\text {)}$ of −0.5 V, and a peak ${I}_{\mathrm {on}}$ of 10.6 mA/mm. The resulting GaN-based CL inverter demonstrates a large 11-V gate swing, rail-to-rail output, and well-matched $n$ /$p$ -FET current density, offering a robust solution for GaN-based power integrated circuit (IC) integration.
Conventional electronics for extreme environments are typically restricted to single thermal regimes, limiting the feasibility of monolithic circuits capable of wide-range operation. To address this, this letter reports a monolithic voltage reference implemented in D/E-mode p-GaN HEMT technology for operation from -269 °C (5 K) to 250 °C. Based on impedance analysis of the conventional two-transistor reference, a multi-loop topology utilizing depletion-mode devices is introduced to suppress output line sensitivity and improve interference immunity. Experimental characterization demonstrates a stable 1.45 V output across a wide supply range of 5–56 V, achieving a line sensitivity of 0.003421 %/V and a power supply rejection of -50.46 dB at 100 Hz. These results establish the feasibility of high-stability biasing for monolithic all-GaN systems under extreme thermal conditions.