27 November 2024 in IEEE Transactions on Electron Devices
This article presents the enhancement-mode (E-mode) GaN p -channel heterojunction field-effect transistors ( p -FETs) with p -Al $_{\text{0.05}}$ Ga $_{\text{0.95}}$ N etching-target layer (ETL). The optimized high-selectivity etching technique achieves an etch rate of approximately 1 nm/min for p -GaN, while also generating a selectivity ratio of 4:1 between p -GaN and p -Al $_{\text{0.05}}$ Ga $_{\text{0.95}}$ N. High-yield E-mode p -FET with ETL has been obtained as the etching process window was expanded to 10 min. The devices achieved the characteristics of a threshold voltage ( $\textit{V}_{\text{th}}$ ) of $-$ 1.15 V and a maximum current density ( $\textit{I}_{\textit{D},\text{max}}$ ) of 6.16 mA/mm. Furthermore, the characteristics of multiple devices demonstrate the high consistency and reproducibility of p -FETs’ $\textit{V}_{\text{th}}$ and $\textit{I}_{\text{ON}}$ , thus providing significant opportunities for developing complementary circuit integration.
22 September 2025 in Applied Physics Letters
This Letter presents tri-gate GaN metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMTs) with improved high-temperature performance for a monolithic integration platform, utilizing a low-damage digital recess technique. The fin structure followed by the multiple cycles of plasma oxidation and wet oxide removal process enables threshold voltage modulation from −9.1 V (D-mode) to +1.1 V (E-mode) in MIS-HEMTs, achieved by tuning the fin width between 800 and 56 nm on the same wafer. The E-mode device shows a low subthreshold swing of 76 mV/dec, a low on-resistance of 8.2 Ω·mm, and a low hysteresis of 26 mV. The E-mode device exhibits a small threshold voltage (Vth) shift of −0.13 V from room temperature up to 200 °C leading to logic inverters of stable characteristics with an inverter threshold voltage shift of only 0.16 V from 25 to 250 °C. These results validate the monolithic integration of tri-gate GaN to be promising for high-frequency and compact mixed-signal systems.
1 December 2025 in IEEE Transactions on Device and Materials Reliability
This work presents an enhancement-mode (E-mode) p-GaN HEMT that significantly improves gate reliability and breakdown voltage through a post-annealing-free oxygen plasma treatment (GOPT). This method forms a GaOxN1x interfacial layer beneath the gate metal, increasing the gate breakdown voltage from 13.8 V to 24.8 V and reducing the gate leakage current by three orders of magnitude at VGS=8 V, compared to conventional Schottky p-GaN gates. Time-dependent gate breakdown (TDGB) testing predicts a maximum safe operating gate voltage of 9.2 V for a 10-year lifetime with a 63% failure probability. The fabricated GOPT p-GaN HEMTs show excellent off-state drain breakdown performance, with a voltage of up to 2940 V at a gate-to-drain distance of 28 5m. This approach offers a simplified fabrication process with superior performance in both gate reliability and high-voltage capability, establishing GOPT p-GaN HEMTs as a promising candidate for highperformance, high-reliability power electronics.
10 February 2026 in IEEE Electron Devices Reviews
Gallium nitride (GaN)-based transistors with p-type GaN (p-GaN) gates are widely recognized as promising devices for power converter applications, due to their positive and stable threshold voltage, low on-resistance, and high breakdown field. However, the fabrication of p-GaN gate high electron mobility transistors (HEMTs) faces several key process challenges, among which the etching of the p-GaN layer has recently become particularly important. Given the emergence of novel p-GaN etching techniques, a comprehensive review that encompasses scientific classification and systematic evaluation of these methods is essential. This paper aims to fill this gap by reviewing the latest fabrication technologies for forming p-GaN gates in p-GaN/aluminum gallium nitride (AlGaN)/GaN heterojunctions. Firstly, the etching methods are categorized into self-terminating etching, dual-step cyclic etching, and plasma treatment techniques. These three classes are comprehensively summarized and compared in terms of etching rate, mechanisms, selectivity, and applicability. Self-terminated etching methods are divided into oxygen-based and fluorine-based systems, with a focus on the influence of critical process parameters on etch rate and selectivity. Subsequently, repetitive self-limiting etching techniques, including digital etching (DE) and atomic layer etching (ALE), are reviewed, with an emphasis on oxide-chloride and chloride-inert gas systems. Finally, plasma passivation processes are introduced as an alternative approach for achieving enhancement-mode p-GaN gate HEMTs. This paper provides a summary and discussion of the key fabrication process of p-GaN gate devices—namely, the p-GaN cap layer etching engineering. It offers guidance for selecting appropriate etching methods under different application scenarios and provides valuable insights for the future development of GaN HEMTs.
9 February 2026 in IEEE Electron Device Letters
Large threshold voltage ( ${V}_{\text {TH}}\text {)}$ hysteresis in GaN $p$ -channel heterojunction field-effect transistors ( $p$ -FETs) significantly degrade device performance and limit its complementary circuit integration potential. This letter reduces the ${V}_{\text {TH}}$ hysteresis of enhancement-mode (E-mode) GaN $p$ -FETs to 20 mV by employing a novel plasma-enhanced atomic layer deposition (PEALD)-grown AlON gate dielectric. Compared to $p$ -FET with Al2O3 gate dielectric, a 15 nm PEALD AlON improved hysteresis from 4.1 V to sub-20 mV under dual-sweep dc-mode measurement. Furthermore, the fabricated E-mode $p$ -FETs with AlON and Al2O3 gate dielectrics achieve ON-resistance ( ${R}_{\text {ON}}\text {)}$ of $670~\Omega \cdot $ mm and $1268~\Omega \cdot $ mm, and ON-state current ( ${I}_{\text {ON}}\text {)}$ of 8.2 mA/mm and 2.8 mA/mm, respectively. The novel AlON dielectric provides significant opportunities for developing GaN complementary circuit integration.
17 April 2026 in IEEE Transactions on Electron Devices
This article reports the monolithic integration of gallium nitride (GaN)-based complementary logic (CL) circuits using MIS-gated $p$ / $n$ -FETs on a $p$ -GaN/UID-GaN/AlGaN/GaN platform. By employing a bilayer gate dielectric stack (2 nm PEALD AlON/18 nm ALD Al2O ${}_{{3}}\text {)}$ , the MIS-gated $n$ -FET achieves enhanced gate breakdown and negligible leakage over a wide ${V}_{\text {GS}}$ range (−2 to 10 V). Time-dependent dielectric breakdown (TDDB)-based lifetime modeling predicts a maximum operating ${V}_{\text {GS}}$ of 6.75V for 10-year reliability. Furthermore, the optimized $p$ -FET exhibits a high ${I}_{\mathrm {on}}$ / ${i} _{\mathrm {off}}$ ratio exceeding $10^{{8}}$ , an enhancement-mode (E-mode) threshold voltage ( ${V}_{\text {TH}}\text {)}$ of −0.5 V, and a peak ${I}_{\mathrm {on}}$ of 10.6 mA/mm. The resulting GaN-based CL inverter demonstrates a large 11-V gate swing, rail-to-rail output, and well-matched $n$ / $p$ -FET current density, offering a robust solution for GaN-based power integrated circuit (IC) integration.