Radar sensors have been widely used to estimate speed and displacement of remote targets. A novel market for contactless radar sensing is emerging in the field of automatization and process analysis, where non destructive testing and evaluation methods are desired. Here, modern radar systems offer various advantages over conventional sensors since they enable the contactless, continuous, and cost-efficient measurement of static or dynamic ranges. These can further be used for vibration and vital sign characterization. Advances in microwave technology, an increasing integration density, and the development of novel algorithms keep boosting the performance of the systems. After introducing the most common operation principles, such as unmodulated and frequency-modulated continuous-wave radar, different design aspects and building blocks of cutting-edge systems are explained in detail. In the second part, selected applications are described in detail. These include the sheet thickness monitoring of metallic foils, and the measurement of the ground speed of vehicles with the latest approaches. Exemplary low-power radar systems are presented to show the limits in terms of power consumption while still offering a high measurement precision. In addition, the topics of mechanical vibration sensing and vital sign sensing are addressed by introducing tailored systems.
Joint communication and sensing (JCAS) holds great potential in a variety of applications because it combines radar signaling and data transmission into a single system. This means that both applications share their spectrum or even their waveform within the RF spectrum, a scarce and expensive resource. Meanwhile, research on beyond 5G and 6G is increasing tremendously. The advance of software-defined radio, where the signal processing mainly takes place in software, allows different implementations for communication and sensing [1] . Another reason for the integration of both into one system is the growing sensor density, which entails mutual interference. Furthermore, sharing hardware requires a sustainable and resource-efficient solution in the field of RF engineering.
The rapid evolution of cellular networks, driven by the proliferation of mobile devices and the exponential growth of the Internet of Things (IoT), has significantly advanced wireless communication technologies. Fifth generation of wireless communications technology (5G) enhanced data rates, latency, and network capacity, resulting in the emergence of new applications. However, the sixth generation (6G) is foreseen to support a new set of use cases with diverse requirements. This paper explores the critical role of artificial intelligence (AI) in shaping the trajectory from 5G to 6G. We discuss AI applications in 5G for network planning, resource allocation, traffic management, and security, as well as propose infrastructure upgrades, like edge servers and enhanced network topologies, to support AI in 6G. Additionally, we outline a visionary perspective on AI’s potential contributions to 6G, highlighting its role in enabling innovative services and applications. By providing this forward-looking perspective, this paper aims to stimulate discussion and guide the development of intelligent and autonomous 6G networks.
22 July 2019 in International Journal of Microwave and Wireless Technologies
This paper presents a novel approach for the determination of True-Speed-Over-Ground for trains. Speed determination is accomplished by correlating the received signals of two side-looking radar sensors. The theoretically achievable precision is derived. Test measurements are done in two different scenarios to give a proof of concept. Thereafter a series of field measurements is performed to rate the practical suitability of the approach. The results of the measurements are thoroughly evaluated. The test and field measurements are carried out using a 24 GHz frequency modulated continuous wave radar.
1 March 2025 in International Journal of Microwave and Wireless Technologies
Due to the rising occupancy of the radio spectrum, new strategies for covering the ever increasing amount of data are necessary. This work presents a system for integrating data transmission into a frequency-modulated continuous wave (FMCW) radar by modulating the radar signal with frequency shift keying (FSK). The system offers a high chirp bandwidth of 5 GHz and uses the 60 GHz band. The FSK carrier frequency affects the noise level. A higher frequency leads to a lower noise floor due to 1/f-noise but requires a higher sampling rate. Therefore, 15 MHz was chosen as a compromise. A high data rate allows for a fast data transmission but requires a short chirp time, which leads to a noisier frequency chirp. The radar parameters are also affected by this choice. This leads to a baud rate of 20.8 kbit/s. With a higher order FSK, higher data rates are possible. This proves that the data transmission via FMCW radar signals is possible and a first choice if lower data rates are sufficient, because the hardware effort is comparatively low.
8 July 2021 in IEEE Microwave and Wireless Components Letters
This work presents a cross-correlation based true-speed-over-ground estimation approach based on experiences from an earlier system. The radar system parameters as well as the antenna configuration were adapted to fit the requirements of the presented application. Also, challenges regarding the previously limited velocity range are addressed and an appropriate solution is proposed. The entire system was thoroughly tested in a train scenario over a wide range of velocities. Very promising measurement results are presented and compared to related approaches.