19 December 2016 in IEEE Transactions on Nuclear Science
Dark current spectroscopy is tested on twenty CMOS image sensors irradiated with protons, neutrons and various ions at different energies. The aim of this work is to differentiate the effect of coulomb and nuclear interactions on the radiation-induced dark current distribution and to identify the main radiation-induced defects responsible for the dark current increase for each type of interaction. For low-energy protons and low-energy light ions (which produce well-separated low energy coulomb interactions), we find that most of the pixels belong to a quantized dark current spectrum at low dark current. In these pixels, the dark current increase seems mainly dominated by specific point defects such as the divacancy and the vacancy-phosphorus complex. Thus, these simple defects seem to form when the displacement damage is rather low and sparse. On the contrary, for nuclear interactions (with neutrons or high-energy protons) producing high coulomb NIEL silicon PKAs or for low energy heavy ions (also having high coulomb NIEL), the DCS spectrum is not visible and all the pixels belong to an exponential hot pixel tail which extends to very high dark current. In these pixels, the dark current increase is mainly dominated by defects with close-to-midgap energy levels. These defects seem more complex than point defects because they can have many different generation rates (explaining the smooth hot pixel tail) and because they tend to form when the displacement damage is high and dense.
10 December 2018 in IEEE Transactions on Nuclear Science
This paper focuses on the radiation-induced dose and single event effects on a color CMOS camera designed for space missions. Gamma-ray and protons are used to evaluate the tolerance against cumulative dose effects. The dark current of the image sensor is the main parameter impacted by dose effects. Heavy ions testing is performed to evaluate single event effects. SEU, SEFI and SEL have been observed and mitigation techniques were proposed for specific space missions.
14 January 2019 in IEEE Transactions on Nuclear Science
This study investigates the leakage currents as well as the leakage current random telegraph signals sources in sense node floating diffusions and their consequences on imaging performances specifically after exposure to high energy particle radiation. Atomic displacement damage and ionization effects are separately studied thanks to neutron and X-ray irradiations. Proton irradiations have been performed to simultaneously study displacement damage dose and total ionizing dose effects while being more representative of the space environment. The studied displacement damage doses ranges from 500 TeV.g-1 to 40 GeV.g-1 and the total ionizing dose ranges from 24 krad(SiO2) to 72 krad(SiO2). High magnitude electric field effects, such as transfer gate induced leakage current, are investigated to further understand the phenomena involved in floating diffusions while giving new insights on the electric field enhancement of the charge generation mechanisms. This work shows that floating diffusions are very sensitive to ionizing radiation because of the presence of depleted Si/SiO2 interfaces with high magnitude electric fields around the junction. On the other hand, displacement damage in the floating diffusions is a major source of high amplitude leakage current random telegraph signals and leakage current non uniformity. Such radiation induced degradations can prevent the use of CMOS image sensor with long floating diffusion retention time (e.g. global shutter operating mode or burst imagers) in radiation environments.
28 March 2018 in IEEE Transactions on Nuclear Science
We propose to identify the displacement damage defects induced by proton and carbon irradiations in a commercial off-the-shelf pinned photodiode (PPD) 8T-CMOS image sensors (CISs) dedicated to space application operating in global shutter mode. This paper aims to provide a better understanding of defects creation in a specific space image sensor. Therefore, it leads to comparable results to those we could find during the mission. The study focuses on bulk defects located in the PPD depleted region which represents the main dark current contribution in PPD CIS. Four sensors have been irradiated with carbon ions and protons at different energies and fluencies. Using both the dark current spectroscopy and the random telegraph signal (RTS) analysis, we investigate defects behavior for different isochronal annealing temperatures. By combining these results, we make the connection between two complementary phenomena and bring out the prevalence of divacancies-based defects in term of dark current contribution.
23 February 2023 in IEEE Transactions on Nuclear Science
Dark count rate (DCR) degradation is measured on 40-nm 2D and stacked CMOS SPADs after proton irradiations. Mean DCR increase is plotted for different displacement damage doses (DDD) for two biasing conditions. Due to field enhancement effects such as Poole-Frenkel and phonon-assisted-tunneling, Non-Ionizing Energy Loss (NIEL) scaling is found to be dependent on the excess bias. Moreover, the associated damage factors are higher compared to pixels with unity gain photodiodes. A model predicting DCR increase with DDD based on field enhancement factor equations and damage energy deposited by the proton induced recoil spectrum is established and fits well with experimental data. Finally, activation energies are extracted: low values between 25 °C and 60 °C confirm the domination of field effects over thermal generation. Furthermore, large energy discrepancies seen at a fixed DCR increase are suggesting that defect structures could also have an impact on DCR distributions.
2 February 2017 in IEEE Transactions on Electron Devices
JLJean-Baptiste Lincelles
+3
This paper demonstrates the existence of dark current blooming in pinned photodiode (PPD) CMOS image sensors (CISs) with the support of both experimental measurements and TCAD simulations. It is usually assumed that blooming can appear only under illumination, when the charge collected by a pixel exceeds the full well capacity (FWC) (i.e., when the photodiode becomes forward biased). In this paper, it is shown that blooming can also appear in the dark by dark current leakage from hot pixels in reverse bias (i.e., below the FWC). The dark current blooming is observed to propagate up to nine pixels away in the experimental images and can impact hundreds of pixels around each hot pixel. Hence, it can be a major image quality issue for the state-of-the-art PPD CISs used in dark current limited applications, such as low-light optical imaging and should be considered in the dark current subtraction process. This paper also demonstrates that one of the key parameter for dark current optimization, the transfer gate bias during integration, has to be carefully chosen depending on the application because the optimum bias for dark current reduction leads to the largest dark current blooming effects.