Wenku Shi

Wenku Shi

Auto-generated profile, based on publicly available information

Wenku Shi

State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun, China

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in IEEE Access
Verified
Journal Article
Open access
SLSong Li
Song Li
ZCZhiyong Chen
Zhiyong Chen
QLQiaobin Liu
Qiaobin Liu
WSWenku Shi
Wenku Shi
KLKunheng Li
Kunheng Li
Reliability engineering plays an important role in the design, manufacture, maintenance, and replacement of industrial products. Over the last few decades, accelerated degradation testing (ADT) has been largely utilized to shorten test durations, reduce the samples needed, and provide sufficient degradation data to ensure the effective reliability assessment of the concerned products. Meanwhile, performance degradation modeling has been recognized as an essential approach to help researchers and producers understand the health conditions of the deteriorating systems. However, the diversity in reliability tests, degradation models, and statistical analysis techniques has increased the difficulty in selecting appropriate reliability assessment methods in specific scenarios. Besides, there are no systematic reviews focused on modeling and analysis of performance degradation data. Therefore, this paper aims to (1) present ADT fundamentals, including the basic theory, ADT methods, accelerated stress variables, type of acceleration models, as well as ADT optimization, (2) comprehensively review current states and future challenges in degradation modeling, (3) discuss the problem of model mis-specification and compare different approaches for parameter estimation, (4) highlight future opportunities and possible directions deserving further research.

15 May 2019 in IEEE Access
Verified
Journal Article
Open access
QLQiaobin Liu
Qiaobin Liu
WSWenku Shi
Wenku Shi
KLKunhen Li
Kunhen Li
ZCZhiyong Chen
Zhiyong Chen
HLHelong Liu
Helong Liu
With focus on predicting the degradation of rubber performance in the natural environment and evaluating its reliability, the distribution law of accelerated aging life is analysed through the accelerated aging test of hot oxygen. A Weibull distribution model is then established to verify the consistency of the accelerated aging mechanism. Through the constant stress accelerated aging test data, the aging characteristics of the rubber under alternating thermal stress load in the natural environment are inferred. The concept of thermal stress amplitude coefficient is proposed, and its numerical value is calculated by the combination of numerical simulation and single-peak curve fitting. Under the principle of time–temperature equivalence, the segmentation time equivalent method and the overall temperature equivalent method are employed to calculate the rubber performance degradation curve under natural environment aging conditions. Finally, according to the Weibull distribution, the aging reliability of the rubber over time is simulated. This research can provide reference for the aging reliability evaluation of products under alternating stress.

7 December 2016 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
WSWen-Ku Shi
Wen-Ku Shi
CQChen Qian
Chen Qian
ZCZhiyong Chen
Zhiyong Chen
YCYang Cao
Yang Cao
HZHenghai Zhang
Henghai Zhang
To install high-performance isolators in a limited installation space, a novel passive isolator based on the four-parameter Zener model is proposed. The proposed isolator consists of three major parts, namely, connecting structure, sealing construction, and upper and lower cavities, all of which are enclosed by four segments of metal bellows with the same diameter. The equivalent stiffness and damping model of the isolator are derived from the dynamic stiffness of the isolation system. Experiments are conducted, and the experiment error is analyzed. Test results verify the validity of the model. Theoretical analysis and numerical simulation reveal that the stiffness and damping of the isolator have multiple properties with different exciting amplitudes and structural parameters. In consideration of the design of the structural parameter, the effects of exciting amplitude, damp channel diameter, equivalent cylinder diameter of cavities, sum of the stiffness of the bellows at the end of the isolator, and length of damp channel on the dynamic properties of the isolator are discussed comprehensively. A design method based on the parameter sensitivity of the isolator’s design parameter is proposed. Thus, the novel isolator can be practically applied to engineering and provide a significant contribution in the field.

18 September 2022 in Machines
Verified
Journal Article
Open access
PDF file
JQJunlong Qu
Junlong Qu
WSWenku Shi
Wenku Shi
JWJuncheng Wang
Juncheng Wang
ZCZhiyong Chen
Zhiyong Chen
Torsional vibration of the automotive driveline has significant influence on driving comfort. This study investigates the influence of clutch nonlinear behaviors on the torsional vibration of the driveline with numerical and experimental methods. A generic automobile powertrain model with 7 degrees of freedom is proposed considering the transient engine torque, the nonlinear characteristics of multi-stage clutch and tire slip. Taking a commercial vehicle as an example, the dynamic behaviors and inherent characteristics of the driveline system are calculated and analyzed. Based on the proposed model, the influences of the clutch parameters on driveline torsional vibration are investigated. In order to validate the proposed model and the analytical results, an optimized clutch is designed and the experiments of torsional vibration are conducted with the prototype and the optimized clutch. The analytical and experimental results demonstrate that an increase in the first end-stop angle and the main-stage hysteresis or a decrease in the second end-stop angle and the main-stage stiffness of the clutch can effectively suppress driveline torsional vibration during vehicle accelerating.

1 January 2021 in IEEE Access
Verified
Journal Article
Open access
HLHelong Liu
Helong Liu
WSWenku Shi
Wenku Shi
RGRui Gao
Rui Gao
ZCZhiyong Chen
Zhiyong Chen
HCHuang Chen
Huang Chen
Composite leaf springs represent a key application of composite materials in the field of automotive lightweight materials. Stiffness, as a critical parameter of composite leaf springs, is closely related to the handling stability and ride comfort of automobiles. Therefore, this paper proposes an explicit theoretical model, which can consider the anisotropy of composite materials and detailed structure of the leaf spring, to predict the stiffness based on the law of energy conservation. The obtained results are verified against the results of the finite element method and bench test of basalt/epoxy samples. Moreover, the influence of the relevant design parameters on the stiffness is analyzed to provide guidance for the stiffness matching of composite leaf springs. The thickness of the composite leaf spring considerably influences its stiffness. As a key parameter representing the bearing capacity, the strength is closely related to the reliability of leaf springs. Based on the Tasi-Wu strength failure criterion, the influence of the relevant design parameters on the strength ratio of a composite leaf spring is analyzed under the constraint of stiffness. An increase in the width of the composite leaf spring enhances its bearing capacity when the stiffness is required to be within a certain range.

25 November 2021 in Advances in Mechanical Engineering
Verified
Journal Article
Open access
PDF file
SZShuguang Zhang
Shuguang Zhang
WSWenku Shi
Wenku Shi
ZCZhiyong Chen
Zhiyong Chen
The low frequency vibration of the vehicle in motion has a great influence on the ride comfort of occupants. The research on the vibration response characteristics of human body plays a great role in analyzing and improving ride comfort. The purpose of this study was to investigate the parameter identification of seated human body dynamic model. A seven-degree-of-freedom (DOF) lumped parameter model was established to describe the vibration response characteristics of human body. The derivation processes of apparent mass (AM) and seat to head transmissibility (STHT) were performed. After the theoretical calculation of the human body vibration characteristics, we used several different evolutionary algorithms to identify the 23 parameters of the model, including the mass, stiffness and damping parameters. By comparing the results of the five optimization algorithms and comprehensively analyzing the convergence and distribution of the non-dominated solution set, we found that the reference vector guided evolutionary algorithm (RVEA) shows good competitiveness in solving many-objective optimization problem (MaOP), that is, parameter identification of seated human body model in this paper. The AM and STHT calculated by model identification were compared with their measured by experiment. The result shows that the selected seven-DOF model can well describe the vertical vibration characteristics of seated human body and the identification method used in this paper can accurately identify the parameters of lumped parameter model, which provides convenience for the establishment of a complete “road-vehicle-seat-human body” system dynamic model.