To install high-performance isolators in a limited installation space, a novel passive isolator based on the four-parameter Zener model is proposed. The proposed isolator consists of three major parts, namely, connecting structure, sealing construction, and upper and lower cavities, all of which are enclosed by four segments of metal bellows with the same diameter. The equivalent stiffness and damping model of the isolator are derived from the dynamic stiffness of the isolation system. Experiments are conducted, and the experiment error is analyzed. Test results verify the validity of the model. Theoretical analysis and numerical simulation reveal that the stiffness and damping of the isolator have multiple properties with different exciting amplitudes and structural parameters. In consideration of the design of the structural parameter, the effects of exciting amplitude, damp channel diameter, equivalent cylinder diameter of cavities, sum of the stiffness of the bellows at the end of the isolator, and length of damp channel on the dynamic properties of the isolator are discussed comprehensively. A design method based on the parameter sensitivity of the isolator’s design parameter is proposed. Thus, the novel isolator can be practically applied to engineering and provide a significant contribution in the field.
1 January 2019 in Mathematical Problems in Engineering
By analyzing the roller force, the nonlinear stiffness model of the double‐row tapered roller hub bearing is derived, and the method of solving the hub bearing stiffness matrix is summarized: if the displacement between the inner and outer rings is known, the stiffness of the hub bearing can be directly calculated. If only the external load of the hub bearing is known, the displacement of the hub bearing needs to be solved by numerical method, and then the stiffness of the hub bearing can be calculated. The improved Newton‐Raphson method is used to solve the stiffness matrix of the hub bearing. Three‐dimensional FE model of DRTRBs is presented and validated the proposed the stiffness matrix of the hub bearing. It is found that the radial stiffness of the hub bearing is greater than the axial stiffness. The stiffness of the hub bearing is greatly affected by the vertical force of the ground and the wheel driving torque, showing obvious nonlinearity. The smaller the vertical ground load and wheel driving torque, the greater the influence of vertical ground load and wheel driving torque on the hub bearing stiffness.
The isolation of the body from engine vibration is the most challenging and disruptive vibrational problem. Active engine mounts (AEMs), especially electromagnetic AEMs, achieve a significant performance improvement in decreasing the wide frequency band vibration. Increasing research interest is necessary to provide the academic community with a guideline for electromagnetic AEMs. Therefore, the current review aims to comprehensively supplement the review of AEMs. The key reviews of electromagnetic AEMs focus on (1) general considerations of electromagnetic AEMs, (2) models, and (3) control strategies. This paper presents a review of the current status and developmental progress of AEMs. A theoretical model, a finite-element model, and the identification (or experimental modelling) of electromagnetic AEMs during the last 2 decades are then studied. Finally, control strategies, such as classical control, adaptive control, and two degree of freedom (2DOF) control, are discussed and compared. The main purpose of this paper is to meet the needs of researchers and engineers engaged in electromagnetic AEM analysis and control.
30 July 2022 in Advances in Mechanical Engineering
A multi-objective optimization method is presented in this paper, aiming at improving the fatigue life of the engine hood while achieving light weight. By analyzing the factors affecting the fatigue life of the engine hood, a multi-objective optimization model was established that considered five design variables including the thickness of the inner plate, the thickness of the outer plate, the stiffness of the hook, the stiffness of the sealing strip, and the height of the buffer block. Then, the multi-objective particle swarm method was used for optimization, and the optimal solution was obtained in the form of a Pareto set. The ideal compromise solution was determined from the Pareto set by using fuzzy membership functions. On this basis, the optimal solution was determined from the Pareto set by comprehensively considering the steel plate material specification, mold and cost constraints. The torsional deformation test and switch fatigue test show that for the optimized engine hood, the fatigue life is increased by 117%, the mass is reduced by 0.51 kg, and the torsional deformation of the engine hood does not increase significantly. The proposed multi-objective optimization method is proved to be feasible and effective in improving engine hood fatigue life and lightweight design.
29 October 2020 in Australian Journal of Mechanical Engineering
This paper proposes an analysis of Mounting Bracket Structure and Material effects on fixed-displacement swash-plate-type compressor. To decrease the interior sound pressure of a vehicle, both finite-element analysis (FEA) and vibration experiment of the automotive air conditioning compressor with the mounting bracket were conducted, and the effect of the material and structure of the mounting bracket on the noise and vibration of the compressor was analysed. The finite-element model of the fixed-displacement swash-plate-type compressor with a mounting bracket is established. For the mounting bracket with different materials and structures, vibration acceleration level (VAL) of the finite-element model was analysed. Results show that the mounting bracket MB3, which is made of QT400-10, provides the best noise and vibration performance, which is also verified through interior sound pressure level experiment. Abbreviations: FEA: finite-element analysis; VAL: vibration acceleration level; FRA: frequency response analysis; EMA: experimental modal analysis; LTI: Linear Time-Invariant; FEM: finite-element model; AMS: automatic multi-level substructuring; DOF: degree of freedom
27 October 2016 in Mathematical Problems in Engineering
Purpose of this paper is to investigate the fatigue life prediction method of the thrust rod based on the continuum damage mechanics. The equivalent stress used as damage parameters established rubber fatigue life prediction model. Through the finite element simulation and material test, the model parameters and the fatigue damage dangerous positions were obtained. By equivalent stress life model, uniaxial fatigue life of the V-type thrust rod is analyzed to predict the ratio of life and the life of the test was 1.73, within an acceptable range, and the fatigue damage occurring position and finite element analysis are basically the same. Fatigue life analysis shows that the method is of correct, theoretical, and practical value.