7 December 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The power converters integrated with active power decoupling (APD) may handle the ripple power in dc-link and then reduce the volume of the filter capacitor dramatically. Generally, voltage and current signals of the LC branch are required for the closed-loop APD control. However, sensor failures could degrade the control performance and even lead to the breakdown of the converter system. This paper proposes a detection method for sensor failures in the APD circuit of the single-phase converter. The voltage and current of the LC branch in the APD circuit are estimated by a dual sliding mode observer (SMO). The residuals of the estimated and measured signals are calculated, and they have high sensitivity to specific sensor faults, namely the current residual is sensitive to the fault of the current sensor, and the voltage residual is sensitive to the fault of the voltage sensor, which could be employed to locate the faulty sensors. Finally, the effectiveness of the proposed method is verified by the simulation and experimental results.
31 March 2025 in IEEE Transactions on Industrial Electronics
The synchronous reluctance motor (SynRM) possesses a simple structure and low cost. However, its application is hindered by high-torque ripple. Traditional asymmetric designs can effectively suppress torque ripple. However, it often exhibits poor performance during reverse rotation and lacks theoretical guidance. In this article, an analytical model is developed to establish the relationship between torque and flux barrier end angles. A novel technique is then proposed to mitigate the torque ripple of the SynRM by introducing mirror asymmetric rotor laminations. These laminations feature asymmetrically designed flux barriers in one pole and periodically symmetric ones in the adjacent pole, arranged in a mirrored stacking configuration. The proposed technique is implemented in practical machines, and the effectiveness of the proposed method is validated through experimental tests.
10 March 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Single current sensor operation (SCSO) in motor drives has garnered significant attention due to its cost-effectiveness and compact dimensions. However, the conventional SCSO sampling logic results in substantial errors in the reconstructed current. To reduce the reconstruction errors, this paper proposes a current sampling-correction method for permanent magnet synchronous motor utilizing a five-segment switchable space vector pulse width modulation (FSS-SVPWM) combined with cross-period sampling technology. This method does not require any motor parameter. An analysis method for FSS-SVPWM voltage harmonics is presented under steady-state conditions. Additionally, the reconstruction dead zone, correction precision, and switching frequency are discussed. Finally, a 1.5kW permanent magnet synchronous motor experimental platform was constructed to verify the performance of the proposed method.