In this paper, we propose a three-dimensional (3D) multi-input multi-output (MIMO) channel model for air-to-ground (A2G) communications in unmanned aerial vehicles (UAV) environments, where the UAV transmitter and ground receiver are in motion in the air and on the ground, respectively. A novel angular estimation algorithm is proposed to estimate the real-time azimuth angle of departure (AAoD), elevation angle of departure (EAoD), azimuth angle of arrival (AAoA), and elevation angle of arrival (EAoA) based on the non-stationary nature of the channel model. In the model, we investigate the time-varying spatial cross-correlation functions (CCFs) and temporal auto-correlation functions (ACFs) with respect to the different moving directions and velocities of the UAV transmitter and ground receiver. Furthermore, we derive and study the Doppler power spectral densities (PSDs) and power delay profiles (PDPs) of the proposed channel model. Numerical results show that characteristics of the proposed channel model are very close to those of practical measurements, which provide a new and practical approach to evaluate the performance of next generation UAV-MIMO communication systems.
20 January 2022 in IEEE Transactions on Wireless Communications
Unmanned aerial vehicle (UAV) communications exploiting millimeter wave (mmWave) can satisfy the increasing data rate demands for future wireless networks owing to the line-of-sight (LoS) dominated transmission and flexibility. In reality, the LoS link can be easily and severely blocked due to poor propagation environments such as tall buildings or trees. To this end, we introduce a reconfigurable intelligent surface (RIS), which passively reflects signals with programmable reflection coefficients, between the transceivers to enhance the communication quality. Specifically, in this paper we generalize a three-dimensional (3D) non-stationary wideband end-to-end channel model for RIS auxiliary UAV-to-ground mmWave multiple-input multiple-output (MIMO) communication systems. By modeling the RIS as a virtual cluster, we study the power delivering capability of RIS as well as the fading characteristic of the proposed channel model. Important channel statistical properties are derived and thoroughly investigated, and the impact of RIS reflection phase configurations on these statistical properties is studied, which provides guidelines for the practical system design. The agreement between theoretical and simulated as well as measurement results validate the effectiveness of the proposed channel model.
1 December 2021 in IEEE Transactions on Communications
Reconfigurable intelligent surface (RIS) consisting of a large number of programmable near-passive units has been a hot topic in wireless communications due to its capability in providing smart radio environments to enhance the communication performance. However, the existing research are mainly based on simplistic channel models, which will, in principle, lead to inaccurate analysis of the system performance. In this paper, we propose a general three-dimensional (3D) wideband non-stationary end-to-end channel model for RIS assisted multiple-input multiple-output (MIMO) communications, which takes into account the physical properties of RIS, such as unit numbers, unit sizes, array orientations and array configurations. By modeling the RIS by a virtual cluster, we describe the end-to-end channel by a superposition of virtual line-of-sight (V-LoS), single-bounced non-LoS (SB-NLoS), and double-bounced NLoS (DB-NLoS) components. We also derive an equivalent cascaded channel model and show the equivalence between end-to-end and cascaded modeling of RIS channels. Then, a sub-optimal solution with low complexity is used to derive the RIS reflection phases. The impact of physical properties of RIS, such as unit numbers, unit sizes, array orientations, array configurations and array relative locations, on channel statistical characteristics has been investigated and analyzed, the results demonstrate that the proposed model is helpful for characterizing the RIS-assisted communication channels.
8 January 2021 in IEEE Transactions on Wireless Communications
Considering mobile terminals with time-varying velocities and randomly moving clusters, a novel multi-mobility non-stationary wideband multiple-input multiple-output (MIMO) channel model for future intelligent vehicle-to-everything (V2X) communications is proposed. To describe the non-stationarity of multi-mobility V2X channels, the proposed model employs a time-varying acceleration model and a random walk process to describe the motion of the communication terminals and that of the scattering clusters, respectively. The evolution of the model parameters over time and the stochastic characteristics of the phase shift caused by the time-varying Doppler frequency are derived. The proposed model is sufficiently general and suitable for characterizing various V2X communication scenarios. Under two-dimensional (2D) non-isotropic scattering scenarios, the important channel statistical properties of the proposed model are derived and thoroughly investigated. The impact of the random walk process of the clusters and the velocity variations of the communication terminals on these statistical properties is studied. The simulation results verify that the proposed model is useful for characterizing V2X channels.
5 September 2018 in IEEE Signal Processing Magazine
The Internet of Things (IoT) improves pervasive sensing and control capabilities via the aid of modern digital communication, signal processing, and massive deployment of sensors but presents severe security challenges. Attackers can modify the data entering or communicated from the IoT sensors, which can have a serious impact on any algorithm using these data for inference. This article describes how to provide tight bounds (with sufficient data) on the performance of the best unbiased algorithms estimating a parameter from the attacked data and communications under any assumed statistical model describing how the sensor data depends on the parameter before attack. The results hold regardless of the unbiased estimation algorithm adopted, which could employ deep learning, machine learning, statistical signal processing, or any other approach. Example algorithms that achieve performance close to these bounds are illustrated. Attacks that make the attacked data useless for reducing these bounds are also described. These attacks provide a guaranteed attack performance in terms of the bounds regardless of the algorithms the unbiased estimation system employs. References are supplied that provide various extensions to all of the specific results presented in this article and a brief discussion of low-complexity encryption and physical layer security is provided.
5 February 2018 in IEEE Transactions on Signal Processing
We consider a sensor network focused on target localization, where sensors measure the signal strength emitted from the target. Each measurement is quantized to one bit and sent to the fusion center. A general attack is considered at some sensors that attempts to cause the fusion center to produce an inaccurate estimation of the target location. The attack is a combination of man-in-the-middle, hacking, and spoofing attacks that can effectively change both signals going into and coming out of the sensor nodes in a realistic manner. We show that the essential effect of attacks is to alter the naive estimate of the distance between the target and each attacked sensor, which ignores the existence of attacks, to a different extent, giving rise to a geometric inconsistency among the attacked and unattacked sensors. With the help of two secure sensors, a class of detectors are proposed to detect the attacked sensors by scrutinizing the existence of the geometric inconsistency. We show that the false alarm and miss probabilities of the proposed detectors decrease exponentially as the number of measurement samples increases, which implies that with sufficient measurement samples, the proposed detectors can identify the attacked and unattacked sensors with any required accuracy. Numerical results show that compared to the cases where all sensors are employed without detecting attacks or only the secure sensors are employed, the localization performance can be significantly improved if we employ the secure sensors and the sensors which are declared as unattacked by the proposed detector.