Nora A. Hamad

Nora A. Hamad

Auto-generated profile, based on publicly available information

Nora A. Hamad

Chemistry Department, Faculty of Science, Menofia University, Shebin El-Kom 32511, Egypt

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 March 2021 in Molecules
Verified
Journal Article
Open access
PDF file
Mohammed F. HamzaMohammed F. Hamza
Mohammed F. Hamza
Amr FoudaAmr Fouda
Amr Fouda
KEKhalid Elwakeel
Khalid Elwakeel
Yuezhou WeiYuezhou Wei
Yuezhou Wei
EGEric Guibal
Eric Guibal
NHNora A. Hamad
Nora A. Hamad
The development of new materials is needed to address the environmental challenges of wastewater treatment. The phosphorylation of guar gum combined with its association to chitosan allows preparing an efficient sorbent for the removal of U(VI) from slightly acidic solutions. The incorporation of magnetite nanoparticles enhances solid/liquid. Functional groups are characterized by FTIR spectroscopy while textural properties are qualified by N2 adsorption. The optimum pH is close to 4 (deprotonation of amine and phosphonate groups). Uptake kinetics are fast (60 min of contact), fitted by a pseudo-first order rate equation. Maximum sorption capacities are close to 1.28 and 1.16 mmol U g−1 (non-magnetic and magnetic, respectively), while the sorption isotherms are fitted by Langmuir equation. Uranyl desorption (using 0.2 M HCl solutions) is achieved within 20–30 min; the sorbents can be recycled for at least five cycles (5–6% loss in sorption performance, complete desorption). In multi-component solutions, the sorbents show marked preference for U(VI) and Nd(III) over alkali-earth metals and Si(IV). The zone of exclusion method shows that magnetic sorbent has antibacterial effects against both Gram+ and Gram- bacteria, contrary to non-magnetic material (only Gram+ bacteria). The magnetic composite is highly promising as antimicrobial support and for recovery of valuable metals.

24 April 2021 in Materials
Verified
Journal Article
Open access
PDF file
Mohammed F. HamzaMohammed F. Hamza
Mohammed F. Hamza
NHNora A. Hamad
Nora A. Hamad
DHDoaa M. Hamad
Doaa M. Hamad
MKMahmoud S. Khalafalla
Mahmoud S. Khalafalla
AAAdel A.-H. Abdel-Rahman
Adel A.-H. Abdel-Rahman
WSWaheed M. Salem
Waheed M. Salem
Efficient removal of Cd(II) and Pb(II) from contaminated water is considered a fundamental point of view. Synthetic hydrogel biopolymers based on chitosan and alginate (cost-effective and eco-friendly) were successfully designed and characterized by highly efficient removal contaminants. The sorbents are characterized by FTIR, SEM-EDX, TGA, XPS analyses and textural properties which are qualified by N2 adsorption. The sorption properties are firstly investigated by the effect of pH, sorption isotherms, uptake kinetics, and selectivity from multi-metal solution with equi-molar concentration. The sorbent with 1:3 ratios (of chitosan and alginate respectively) is the most effective for metal removal (i.e., 0.81 mmol Cd g−1 and 0.41 mmol Pb g−1). Langmuir and Sip’s models fitted better the adsorption isotherms compared to the Freundlich model. Uptake kinetics was well fitted by pseudo-first-order rate equation, while the saturation was achieved within 40 min. The sorbent shows good reproducibility through duplicate the experiments with negligible decreasing efficiency (>2.5%). The sorbent was applied for water treatment on samples collected from the industrial area (i.e., 653 and 203 times over the MCL for Cd(II) and Pb(II) respectively according to WHO). The concentration of Cd and Pb was drastically decreased in the effluents as pH increased with removal efficiency up to 99% for both elements at pH 5.8 and SD equivalent 1 g L−1 for 5 h.

17 January 2022 in Science of The Total Environment
Verified
Journal Article
Closed access
Mohammed F. HamzaMohammed F. Hamza
Mohammed F. Hamza
Yuezhou WeiYuezhou Wei
Yuezhou Wei
MKMahmoud S. Khalafalla
Mahmoud S. Khalafalla
Neveen Salah AbedNeveen Salah Abed
Neveen Salah Abed
Amr FoudaAmr Fouda
Amr Fouda
NHNora A. Hamad
Nora A. Hamad

21 June 2022 in Catalysts
Verified
Journal Article
Open access
PDF file
MZMaram Zahra
Maram Zahra
Mohammed F. HamzaMohammed F. Hamza
Mohammed F. Hamza
GEGehan El-Habibi
Gehan El-Habibi
AAAdel A.-H. Abdel-Rahman
Adel A.-H. Abdel-Rahman
HMHamed I. Mira
Hamed I. Mira
NHNora A. Hamad
Nora A. Hamad
This study aims to evaluate the functionalization of chitosan biopolymer with heterocyclic moieties of 2-thioxodihydropyrimidine-4,6(1H,5H)-dione used for enhancing the sorption of Cr ions from aqueous solution. A synthesized sorbent is a nanoscale particle (around 5–7 nm), which explains the fast kinetics of sorption. The sorbent is specified using elemental analysis (EA), FTIR, BET (nitrogen sorption desorption isotherms), TGA, and SEM-EDX analyses. Sorption properties are investigated using ultraviolet emission (UV) but also using visible light (L). In the sorption diagram, the high sorption uptake and fast kinetics observed using ultraviolet conditions are shown. This work is conducted by removing Cr ions from highly contaminated tannery effluents, which have a high concentration of Cr associated with other poisonous elements such as Cd(II) and Pb(II). Under the selected conditions, complete sorption is performed during the first 60 and 45 min with a capacity of 2.05 and 2.5 mmol Cr g−1 for the crosslinked chitosan (without functionalization) in L and UV, respectively. This sorption is enhanced by functionalizing to 5.7 and 6.8 mmol Cr g−1 at the L and UV, respectively, as well as improving the sorption kinetics to 35 and 30 min for both techniques, respectively. The PFORE, and (Langmuir and Sips equations) fit the kinetics and isotherms, respectively.

3 July 2022 in Materials
Verified
Journal Article
Open access
PDF file
Mohammed F. HamzaMohammed F. Hamza
Mohammed F. Hamza
Yuezhou WeiYuezhou Wei
Yuezhou Wei
KAKhalid Althumayri
Khalid Althumayri
Amr FoudaAmr Fouda
Amr Fouda
NHNora A. Hamad
Nora A. Hamad
Modified chitosan has been widely used for heavy metals removal during the last few decades. In this research, the study was focused on the effect of modified chitosan particles after grafting with heterocyclic constituent for enhancing the sorption of Cr(VI) ions. Chitosan was functionalized by 2-thioxodihydropyrimidine-4,6(1H,5H)-dione, in which the synthesized composite considered as a nanoscale size with average 5–7 nm. This explains the fast kinetics of sorption with large surface area. The prepared sorbent was characterized by Fourier-transform infrared (FTIR), elemental analysis (EA), Brunauer–Emmett–Teller (BET surface area) theory, thermogravimetric analysis (TGA), mass spectroscopy, and scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDX) analyses. The experimental part of this work involved the application of the synthesized sorbent for the removal of Cr(VI) ions from highly contaminated tannery effluents that are characterized by a high concentration toward chromate ions with other associated toxic elements, i.e., Pb(II) and Cd (II) ions, which underscore the importance of this treatment. Under the selected conditions (K2Cr2O7 salt, Co: 100 mg L−1 and pH: 4), the sorption diagram shows high Cr(VI) sorption and fast uptake kinetics. The sorption was enhanced by functionalization to 5.7 mmol Cr g−1 as well as fast uptake kinetics; 30 min is sufficient for total sorption compared with 1.97 mmol Cr g−1 and 60 min for the non-grafted sorbent. The Langmuir and Sips equations were fitted for the sorption isotherms, while the pseudo-first order rate equation (PFORE) was fitted for the uptake kinetics.

28 August 2023 in Journal of Polymers and the Environment
Verified
Journal Article
Open access
PDF file
AAAsmaa Abuessawy
Asmaa Abuessawy
Amr FoudaAmr Fouda
Amr Fouda
AAAdel A.-H. Abdel-Rahman
Adel A.-H. Abdel-Rahman
MHMohamed A. Hawata
Mohamed A. Hawata
NHNora A. Hamad
Nora A. Hamad
Alizarin Red (AR) is one of the most colored hazardous industrial dyes. For effective removal of AR, a new sorbent of modified heterocyclic-magnetite chitosan nanocomposite labeled as AOC@MC was synthesized and characterized by FTIR, TGA, XRD, BET, TEM,SAED pattern and SEM-EDX. Effect of contact time, pH, adsorbent dosage, initial Alizarine Red concentration and temperature was investigated. The maximum AR removal was 98.9% and attained at optimum conditions which were pH = 3.0, contact time = 50 min., and adsorbent dosage = 0.03 g/L. The findings revealed that at pH 3 and 30 °C, the maximum adsorption capacity was approximately 162 mg/g. Within 50 min, equilibrium adsorption was attained. A pseudo-second-order equation might be used to fit the kinetic data that was acquired at the optimal pH level of 3. Langmuir adsorption isotherms could accurately represent the adsorption process. The antimicrobial properties of the functionalized sorbent AOC@MC and its heterocyclic base AOC were characterized by determining the zone of inhibition (ZOI) against Staphylococcus aureus and Klebsiella pneumonia as a model for Gram-positive and Gram-negative bacteria respectively. AOC@MC exhibits promising activity with clear zones of 20.1 ± 0.2 and 17.6 ± 0.4 mm for S. aureus and K. pneumonia respectively. Overall, the modified sorbent AOC@MC was efficient on AR dye removal and antibacterial activity compared to the corresponding heterocyclic compound AOC.