School of Electrical Engineering, State Key Laboratory of Power Equipment and Insulation, Xi’an Jiaotong University, Xi’an, Shaanxi Province 710049, People’s Republic of China
Auto-generated profile, based on publicly available information
Xinyu Gao
School of Electrical Engineering, State Key Laboratory of Power Equipment and Insulation, Xi’an Jiaotong University, Xi’an, Shaanxi Province 710049, People’s Republic of China
While multiple studies have explored the mechanism for DC and AC microscale gas breakdown, few have assessed the mechanism for pulsed voltage gas breakdown at the microscale. This study experimentally and analytically investigates gas breakdown for gap widths from 1 μm to 25 μm. Using an electrical-optical measurement system with a spatial resolution of 1 μm and a temporal resolution of 2 ns, we measure the breakdown voltages and determine breakdown morphology as a function of the gap width. An empirical fit shows that the breakdown voltage varies linearly with the gap distance at smaller gaps, agreeing with an analytical theory for DC microscale gas breakdown coupling field emission and Townsend avalanche that shows that the slope is a function of field emission properties. Furthermore, the curved breakdown paths captured between 5 μm and 10 μm demonstrate a similar effective length (∼11.7 μm) independent of the gap width, which is consistent with a “plateau” in breakdown voltage. This indicates that Townsend avalanche alone is insufficient to drive breakdown for these gaps and that ion enhanced field emission must contribute, in agreement with theory. The overall agreement of measured breakdown voltage with theoretical predictions from 1 μm to 25 μm indicates the applicability of DC microscale gas breakdown theory to pulsed breakdown, demonstrating that pulsed voltages induce a similar transition from Townsend avalanche to field emission as DC and AC voltages at the microscale.
24 June 2020 in Journal of Physics D: Applied Physics
Due to the miniaturization of microelectromechanical systems, nanoelectromechanical systems and molecular devices, the problem of vacuum insulation becomes more and more prominent. The nanoscale thermal effects caused by electron emission and electric current Joule heat under high electric fields lead to gasification and migration of material in the device. In this work, a coupled molecular dynamics–electrodynamics method is used to simulate the thermal evaporation of nanotips under high electric field. Moreover, Cu nanotips with different initial geometries and different macroscopic electric fields are modelled. The deformation and damage mechanisms of nanotips under high electric field are discussed. Our simulations show that the aspect ratio of nanotips has a significant influence on the thermal evaporation of nanotips. The thermal runaway occurring in picosecond time-scale plays an important role for the initiation of the vacuum breakdown. An empirical relationship is obtained between the on-set breakdown time and the macroscopic electric field and the geometry of nanotips by analysing the numerical results.
1 June 2022 in Journal of Physics D: Applied Physics
We performed multiscale-multiphysics simulations for W, Mo and Cu nanotips under high electric field to investigate their structural evolution and thermal runaway process. The critical electric field values for the electric prebreakdown condition are predicted to be 311 MV m−1, 570 MV m−1 and 675 MV m−1 for Cu, Mo and W nanotips respectively (R0 = 1 nm, H0 = 100 nm). The boiling point of the metal is found to be a good predictor of the critical electric field strength for the initiation of thermal runaway. For metal nanotips made of refractory metals such as W and Mo, the structural thermal runaway process is determined by the rapid growth of small protrusions and their subsequent sharpening and thinning under the high electric stress on the apex region. On the other hand, the more intense atomic evaporation of Cu metal nanotips is caused by the ejection of large droplets generated by recrystallization and necking of the molten region at the apex of the nanotip. The differences in the observed structural evolutions of nanotips between refractory metals and the Cu during the thermal runaway event clearly show the strong influence of melting and boiling points on the electric prebreakdown process in nanoscale.
24 April 2023 in Journal of Physics D: Applied Physics
Multi-scale and multi-physics simulations are carried out for nano-emitters consisting of FCC (Al, Cu and Au), BCC (V, Mo and W) and HCP (Ti, Zn and Zr) metals, using hybrid electrodynamics coupled with molecular dynamics-particle in cell simulations (PIC-ED–MD). We show that the tilting of the nano-emitter at low temperature and small electric field (E-field) is mainly caused either by the movement of partial dislocations at the apex of the nanotip or by the elastic local distortions of atomic registries away from their ideal lattice sites (FCC/BCC/HCP). At high E-field, the intense resistive heating due to the strong electron emission leads to the direct melting of the apex of nano-emitters. For nano-emitters consisting of low melting point metals such as Al, Zn and Au, the thermal runaway is driven by the elongation, thinning and necking of the molten region. Meanwhile, the elongation, thinning and sharpening produce the nano-protrusion at the apex of metal nano-emitters, and the detachment of atoms or atomic clusters from the nano-protrusion mainly contributes to the thermal runaway event for refractor metals such as Ti, Zr, Mo and W. The critical E-field strength of metal nano-emitters is found to be strongly correlated with structural parameters (atomic coordination number of liquid and equilibrium lattice constant), thermodynamic quantities (cohesive energy and enthalpy of evaporation) and phase transition temperatures (melting point and boiling point). These correlations enable us to establish either single-variable linear fitting models or multi-variable linear regression models to predict the critical E-field value for metal nano-emitters with good credibility.
The study on breakdown characteristics at microscale is very vital to the plasma physics community and micro/nanoelectronic industries. However, the dynamic development processes including the electron avalanche and discharge channel during the breakdown event are still unclear experimentally so far due to the restriction of the in-situ diagnostic technique. In this paper, an optical diagnostic technique is put forward to achieve an in-situ observation of the dynamic breakdown process across microgaps at atmospheric pressure. By using the nanosecond temporally and micron spatially resolved optical measurement method, the light emission appearances of microgap breakdown under nanosecond pulse have been captured and imaged directly. The initial and propagation mechanisms for electrical breakdown across the very small air gap are discussed based on the light emission properties. Results show that the light emission initiates from the cathode as the initial electron avalanche, then the avalanche transits to the streamer due to the space charge effect and photoionization, and propagates towards the anode with a velocity of 4.40×10 3 m/s, demonstrating a cathode-directed streamer in the pulsed breakdown. The space charge induced field enhancement and photoionization are proved to play a significant role in the pulsed breakdown across microgaps. In addition, the time to breakdown is estimated to be about 20ns while the formative time lag is about 9ns through the temporal sequence of the optical images. The in-situ optical measurement technique presented in this paper would be of a great help for better understanding the physical mechanism of microgap breakdown.