Malte Jonas Marius Julian Becher

Malte Jonas Marius Julian Becher

Auto-generated profile, based on publicly available information

Malte Jonas Marius Julian Becher

Applied Laser Technologies Ruhr University Bochum Bochum Germany

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 July 2023 in Frontiers in Nanotechnology
Verified
Journal Article
Open access
MBMalte J. M. J. Becher
Malte J. M. J. Becher
JJJulia Jagosz
Julia Jagosz
CBClaudia Bock
Claudia Bock
AOAndreas Ostendorf
Andreas Ostendorf
EGEvgeny L. Gurevich
Evgeny L. Gurevich
The formation of laser-induced periodic surface structures (LIPSSs) on the atomic layer-deposited (ALD) molybdenum disulfide (MoS2) upon femtosecond laser processing is studied experimentally. Laser-processing parameters such as average laser power and the scan speed at which the formation of the periodic nanostructures takes place are identified. Optical and scanning electron microscopy are applied to identify the parameter regions for the different LIPSS formations and transitions between them. High- and low-spatial frequency LIPSS (HSFL and LSFL) with two distinct periods λLSFL ≈ 1.1 μm and λHSFL ≈ 83 nm can be observed. The HSFL are dominating at higher and the LSFL at lower laser average powers. Formation of LIPSS is found to inhibit laser ablation at lower scan speeds.

12 July 2024 in Advanced Materials Technologies
Verified
Journal Article
Open access
JJJulia Jagosz
Julia Jagosz
LWLeander Willeke
Leander Willeke
NGNils Gerke
Nils Gerke
MBMalte J. M. J. Becher
Malte J. M. J. Becher
PPPaul Plate
Paul Plate
CBClaudia Bock
Claudia Bock
2D materials like transition metal dichalcogenides (TMDCs) have been widely studied and are a gateway to modern technologies. While research today is mostly carried out on a laboratory scale, there is an intensive need for reliable processes on a wafer‐scale, starting with monolayer‐precise deposition of high‐quality films. In this work, a plasma‐enhanced atomic layer deposition (PEALD) process is developed on a 200 mm SiO2/Si substrate. The layers are investigated regarding crystallinity, composition, homogeneity, microstructure, topography, and electrical properties. The process is then applied on 200 mm alkali‐free glass wafers aiming toward flexible electronics and compatibility with Si processes. A complete coverage of the wafer with a satisfying uniformity is achieved on both substrates and direct polycrystalline growth of MoS2 films is verified on the entire wafer at a substrate temperature of T = 230 °C. On glass, the deposited MoS2 films exhibit a higher crystallinity and are more planar compared to the SiO2/Si substrate. Furthermore, application relevant few‐nanometer thick layers are investigated in detail. This low‐temperature process inspires optimism for future direct integration of 2D‐materials in an economical bottom‐up approach on a wide variety of substrates, thus paving the way for industrial mass production.

8 September 2023 in Advanced Engineering Materials
Verified
Journal Article
Open access
MBMalte Jonas Marius Julian Becher
Malte Jonas Marius Julian Becher
JJJulia Jagosz
Julia Jagosz
RNRahel-Manuela Neubieser
Rahel-Manuela Neubieser
JWJan-Lucas Wree
Jan-Lucas Wree
ADAnjana Devi
Anjana Devi
AOAndreas Ostendorf
Andreas Ostendorf
To implement 2D molybdenum disulfide (MoS2) in the flexible electronic industry, large, uniform, and crystalline films on flexible substrates are needed. Thermal atomic layer deposition (ALD) generates large‐area uniform MoS2 films at low temperatures directly on temperature‐sensitive substrates. But if the grown films are amorphous, a high‐temperature posttreatment of the whole sample, which may cause thermal degradation of the substrate or other layers, needs to be avoided. In this article, the crystallization of amorphous MoS2 layers deposited by thermal ALD processed with picosecond laser pulses (λ = 532 nm), in a “cold” annealing process, is reported. The laser fluence range varies from = 8.73 mJ cm−2 to = 18.25 mJ cm−2 with scanning speeds from = 240 mm s−1 to = 2640 mm s−1. The crystallization and the influence of the processing parameters on the film morphology are analyzed in detail by Raman spectroscopy and scanning electron microscopy. Furthermore, a transition of amorphous MoS2 by laser annealing to self‐organized patterns is demonstrated and a possible process mechanism for the ultrashort‐pulsed (usp)‐laser annealing is discussed. Finally, the usp laser annealed films are compared to thermally and continuous‐wave‐laser‐annealed samples.

1 November 2022 in Materials Research Express
Verified
Journal Article
Open access
TBThomas Berning
Thomas Berning
MBMalte Becher
Malte Becher
JWJan-Lucas Wree
Jan-Lucas Wree
JJJulia Jagosz
Julia Jagosz
AKAleksander Kostka
Aleksander Kostka
CBClaudia Bock
Claudia Bock
Transition metal dichalcogenides (TMDCs) such as tungsten disulfide (WS2) are studied for advanced electronic and optical devices because of their unique and versatile electrical, optical and mechanical properties. For the use of TMDC films in next-generation flexible electronics, large-area bottom-up synthesis on flexible substrates needs to be mastered, understood and controlled. In this study, we performed a detailed study on the nucleation and growth of WS2 layers deposited by metalorganic chemical vapor deposition (MOCVD) on crystalline van-der-Waals material muscovite mica as a model substrate and on the alkali-metal free flexible glass AF 32® eco. The deposition of the WS2 layers was performed using an all nitrogen-coordinated bis-imido-bis-amido tungsten based precursor in combination with elemental sulfur as the co-reactant. On both substrates, crystalline growth of WS2 at a moderate growth temperature of 600 °C was verified by Raman spectroscopy and X-ray diffraction (XRD). However, the growth mode and nucleation density differ significantly. On mica, an initially planar growth of WS2 triangular islands is observed, whereas untreated glass reveals an out-off plane growth. Detailed XRD and Raman analysis show tensile strain in the WS2 films on both substrates, indicating a strong interaction from CVD grown TMDC films with the underlying carrier material. In order to avoid such substrate-semiconductor interaction, a substrate pre-treatment is required. A plasma pre-treatment prior to the deposition leads to a planar growth even on amorphous glass substrates.

6 October 2024 in Advanced Materials Interfaces
Verified
Journal Article
Open access
MBMalte J. M. J. Becher
Malte J. M. J. Becher
JUJonas B. Ullrich
Jonas B. Ullrich
JJJulia Jagosz
Julia Jagosz
AKAleksander Kostka
Aleksander Kostka
CBClaudia Bock
Claudia Bock
EGEvgeny Gurevich
Evgeny Gurevich
In this paper, the formation of laser‐induced periodic surface structures (LIPSS) on atomic‐layer deposited MoS2 layers are studied experimentally. The process parameters (laser fluence and the pulse overlap) corresponding to formation of low‐ and high‐spatial frequency LIPSS as well as ablation and modification of the layers are identified for different pulse durations in the range from 0.2 to 10 ps. The role of the temperature accumulation is evaluated by changing the repetition rate from 0.2 to 2 MHz. The negative accumulation effect, i.e., the ablation of the layers becomes more difficult at higher laser pulse overlaps, is also observed. A simple model explaining the transition between different types of the LIPSS and the decrease of the ablation efficiency with the pulse overlap is suggested.

18 May 2023 in arXiv
Verified
Preprint
Open access
PDF file
MBMalte J. M. J. Becher
Malte J. M. J. Becher
JJJulia Jagosz
Julia Jagosz
RNRahel-Manuela Neubieser
Rahel-Manuela Neubieser
JWJan-Lucas Wree
Jan-Lucas Wree
ADAnjana Devi
Anjana Devi
AOAndreas Ostendorf
Andreas Ostendorf
Thin films of molybendum disulfide grown via thermal atomic layer deposition at low temperatures, suitable for temperature sensible substrates, can be amorphous. To avoid a high temperature post treatment of the whole sample, which can cause thermal degradation of the substrate or other layers, a ultrashort pulse (usp) laser-induced transformation to crystalline layers is one of the most promising routes. In this paper we report the crystallization of amorphous MoS$_2$ layers processed with ultrashort laser pulses. The amorphous MoS$_2$ films were deposited by atomic layer deposition (ALD) and exposed to picosecond laser pulses ($λ= 532$ nm). The crystallization and the influence of the processing parameters on the film morphology were analyzed in detail by Raman spectroscopy and scanning electron microscopy. Furthermore, a transition of amorphous MoS$_2$ by laser annealing to self-organized patterns is demonstrated and a possible process mechanism for the ultrashort pulse laser annealing is discussed. Finally, the usp laser annealed films were compared to thermally and continuous wave (cw) laser annealed samples.