In this paper, the methods of digital rock physics are applied to determine pressure-dependent effective thermal conductivity in rock samples. Simulations are performed with an in-house 3D finite volume code. In a first step, four numerical models are derived from a given tomographic scan of Berea sandstone. Consequently, simulations of the thermal conductivity at ambient conditions are performed and validated with experimental data. In a second step, a new workflow for the determination of the pressure-dependent thermal conductivity in rock samples is elaborated, tested and calibrated. Results originating from the derived workflow show very good agreement with experimental data. This article is protected by copyright. All rights reserved
A new model for the determination of the permeability in sandstones under confining pressure is presented. Building on the concepts of digital rock physics, a numerical model is derived from a 3D tomographic scan. The pressure-dependent behavior is mimicked by adding an artificial flow resistance to the pore throats. All permeability simulations are performed using an in-house finite-volume code. In the first step, the proposed model is tested based on a given Bentheim sandstone sample and compared with experimental data. In the second step, the influencing factors of the model are investigated. Mainly discussed are the influences of the tomographic scan and the numerical resolution. Overall, the proposed model is observed to be capable of reproducing general trends of the experimental data, whereby the magnitude of the numerically determined permeabilities can strongly depend on the investigated influencing factors.
Over the last two decades, Digital Rock Physics (DRP) has become a complementary part of the characterization of reservoir rocks due to, among other things, the non-destructive testing character of this technique. The use of high-resolution X-ray Computed Tomography (XRCT) has become widely accepted to create a digital twin of the material under investigation. Compared to other imaging techniques, XRCT technology allows a location-dependent resolution of the individual material particles in volume. However, there are still challenges in assigning physical properties to a particular voxel within the digital twin, due to standard histogram analysis or sub-resolution features in the rock. For this reason, high-resolution image-based data from XRCT, transmitted-light microscope, Scanning Electron Microscope (SEM) as well as inherent material properties like porosity are combined to obtain an optimal spatial image of the studied Ruhr sandstone by a geologically driven segmentation workflow. On the basis of a homogeneity test, which corresponds to the evaluation of the grayscale image histogram, the preferred scan sample sizes in terms of transport, thermal, and effective elastic rock properties are determined. In addition, the advanced numerical simulation results are compared with laboratory tests to provide possible upper limits for sample size, segmentation accuracy, and a calibrated digital twin of the Ruhr sandstone. The comparison of representative grayscale image histograms as a function of sample sizes with the corresponding advanced numerical simulations, provides a unique workflow for reservoir characterization of the Ruhr sandstone.