Lithium-ion batteries have emerged as the state-of-the-art energy storage for portable electronics, electrified vehicles, and smart grids. An enabling Battery Management System holds the key for efficient and reliable system operation, in which State-of-Charge (SOC) estimation and State-of-Health (SOH) monitoring are of particular importance. In this article, an SOC and SOH co-estimation scheme is proposed based on the fractional-order calculus. First, a fractional-order equivalent circuit model is established and parameterized using a Hybrid Genetic Algorithm/Particle Swarm Optimization method. This model is capable of predicting the voltage response with the root-mean-squared error less than 10 mV under various driving-cycle-based tests. Comparative studies show that it improves the modeling accuracy appreciably from its second- and third-order counterparts. Then, a dual fractional-order extended Kalman filter is put forward to realize simultaneous SOC and SOH estimation. Extensive experimental results show that the maximum steady-state errors of SOC and SOH estimation can be achieved within 1%, in the presence of initial deviation, noise, and disturbance. The resilience of the co-estimation scheme against battery aging is also verified through experimentation.
State of charge (SOC) estimation is a key issue in battery management systems. The challenge lies in balancing the trade-off between accuracy and computation cost. To this end, we propose an alternate method by combining the ampere-hour integral (AHI) method which has low computation cost, and the adaptive extended Kalman filter (AEKF) method, which has high accuracy. The technical viability of this alternate method is verified on a LiMnO2-LiNiO2 battery module with a nominal capacity of 130 Ah under the New European Driving Cycle (NEDC) condition. Drifts in current and voltage measurement are considered. The experimental results show that the absolute SOC error using the AHI method monotonously increases from 0% to 7.2% with the computation time of 10 s while the calculation time is obtained on a ThinkPad E450 PC with an Intel Core i7-5500U CPU @2.40 GHz and 16.0 GB RAM. The absolute SOC error of the AEKF method maintains within 3.5% with the computation time of 49 s. Therefore, the alternate method almost maintains the same SOC accuracy compared to the AEKF method which reduces the maximum absolute SOC error by 50% compared to the AHI method. Therefore, the alternate method almost has the same computation time compared with the AHI method which reduces the computation time by nearly 75% compared to the AEKF method.
Severe deterioration of lithium-ion cells at low temperatures constitutes one of the bottlenecks for the wide adoption of electric vehicles. Notwithstanding the remarkable progress in fundamental understanding, a knowledge gap remains in how the low-temperature aging depends on the material chemistry, the application orientation that is mainly dictated by electrode structure, and the cell format. In this contribution, four types of lithium-ion cells that are different in application orientation (power or energy), cathode chemistry (LiNixMnyCo1−x−yO2 or LiNixCoyAl1−x−yO2), and cell format (18 650 cell or pouch cell) are subjected to low-temperature cycling tests. The aging phenomena and mechanisms during low-temperature cycling are systematically analyzed using electrochemical methods. Cell resistance increases more remarkably for energy-type cells, while cell capacity decreases more quickly for power-type cells during low-temperature cycling. Different material chemistries lead to different limiting processes during low-temperature cycling. Generated heat dissipates much more easily for pouch cells than for 18 650 cells, thereby making lithium plating more serious for pouch cells during low-temperature cycling.