Xiaofan Yang

Xiaofan Yang

Auto-generated profile, based on publicly available information

Xiaofan Yang

The State Key Laboratory of Complex Electromagnetic Environment Effects on Electronic and Information System, Luoyang 471004, China

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 February 2022 in Sensors
Verified
Journal Article
Open access
PDF file
CWChen Wang
Chen Wang
Xiaoming LiuXiaoming Liu
Xiaoming Liu
Zhixiang HuangZhixiang Huang
Zhixiang Huang
SYShuo Yu
Shuo Yu
XYXiaofan Yang
Xiaofan Yang
XSXiaobang Shang
Xiaobang Shang
This paper reports on a sensor based on multi-element complementary split-ring resonator for the measurement of liquid materials. The resonator consists of three split rings for improved measurement sensitivity. A hole is fabricated at the centre of the rings to accommodate a hollow glass tube, through which the liquid sample can be injected. Electromagnetic simulations demonstrate that both the resonant frequency and quality factor of the sensor vary considerably with the dielectric constant and loss tangent of the liquid sample. The volume ratio between the liquid sample and glass tube is 0.36, yielding great sensitivity in the measured results for high loss liquids. Compared to the design based on rectangular split rings, the proposed ring structure offers 37% larger frequency shifts and 9.1% greater resonant dips. The relationship between dielectric constant, loss tangent, measured quality factor and resonant frequency is derived. Experimental verification is conducted using ethanol solution with different concentrations. The measurement accuracy is calculated to be within 2.8%, and this validates the proposed approach.

10 August 2019 in Electronics
Verified
Journal Article
Open access
PDF file
XYXiaofan Yang
Xiaofan Yang
Xiaoming LiuXiaoming Liu
Xiaoming Liu
SYShuo Yu
Shuo Yu
LGLu Gan
Lu Gan
JZJun Zhou
Jun Zhou
YZYonghu Zeng
Yonghu Zeng
With the rapid development of millimeter wave technology, it is a fundamental requirement to understand the permittivity of materials in this frequency range. This paper describes the dielectric measurement of undoped silicon in the E-band (60–90 GHz) using a free-space quasi-optical system. This system is capable of creating local plane wave, which is desirable for dielectric measurement in the millimeter wave range. Details of the design and performance of the quasi-optical system are presented. The principle of dielectric measurement and retrieval process are described incorporating the theories of wave propagation and scattering parameters. Measured results of a sheet of undoped silicon are in agreement with the published results in the literature, within a discrepancy of 1%. It is also observed that silicon has a small temperature coefficient for permittivity. This work is helpful for understanding the dielectric property of silicon in the millimeter wave range. The method is applicable to other electronic materials as well as liquid samples.

19 October 2022 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
XLXiao Li
Xiao Li
QZQiwei Zhan
Qiwei Zhan
BSBozhao Sun
Bozhao Sun
HFHaoqiang Feng
Haoqiang Feng
YZYonghu Zeng
Yonghu Zeng
WYWen-Yan Yin
Wen-Yan Yin
We propose a scientific machine learning (SciML) algorithm toward 3-D dynamic digital twins, which represent multiphysics coupling effects in large-scale electronic chips. The SciML is a burgeoning topic, and here we refer to an organic fusion of scientific computing, model order reduction, and machine learning (ML) method. The proposed model order reduction compresses multiphysics information by a data-driven non-intrusive technique, thus getting rid of the access to backend source code; the proposed ML intrinsically infers the partial differential equation operators encoding the physical process. Numerical experiments showcase that the proposed digital twins have superior properties in real-time intelligent computing and generalization capability in predictive modeling. Nevertheless, it should be mentioned that the presented work is still in an early stage of intelligent digital twins.

14 October 2018 in Nanomaterials
Verified
Journal Article
Open access
PDF file
LYLongfang Ye
Longfang Ye
FZFang Zeng
Fang Zeng
Yong ZhangYong Zhang
Yong Zhang
XXXiong Xu
Xiong Xu
XYXiaofan Yang
Xiaofan Yang
QLQing Huo Liu
Qing Huo Liu
We propose and numerically demonstrate two novel terahertz absorbers made up of periodic single- and double-layer decussate graphene ribbon arrays. The simulated results show that the proposed absorbers have narrowband near-unity terahertz absorption with ultra-wide frequency reconfiguration and angular stability. By tuning the Fermi level of graphene ribbons, the over 90% absorbance peak frequency of the absorber with single-layer graphene structure can be flexibly adjusted from 6.85 to 9.85 THz for both the transverse magnetic (TM) and transverse electric (TE) polarizations. This absorber with single-layer graphene demonstrates excellent angular stability with the absorbance peaks of the reconfigurable absorption bands remaining over 99.8% in a wide angle of incidence ranging from 0 to 70°. The tuning frequency can be significantly enhanced by using the absorber with double-layer graphene structure from 5.50 to 11.28 THz and 5.62 to 10.65 THz, approaching two octaves under TM and TE polarizations, respectively. The absorbance peaks of the reconfigurable absorption band of this absorber for both polarizations maintain over 70%, even at a large angle of incidence up to 70°. Furthermore, an analytical fitting model is also proposed to accurately predict the absorbance peak frequencies for this variety of absorbers. Benefitting from these attractive properties, the proposed absorber may have great potential applications in tunable terahertz trapping, detecting, sensing, and various terahertz optoelectronic devices.

2 April 2022 in Electronics
Verified
Journal Article
Open access
PDF file
Xiaoming LiuXiaoming Liu
Xiaoming Liu
HWHaiyang Wang
Haiyang Wang
XYXiaofan Yang
Xiaofan Yang
JWJinhong Wang
Jinhong Wang
A quad-band circularly-polarized antenna, for applications of a global navigation satellite system (GNSS), 5G, and WIFI-6E, is designed, fabricated, and measured. The proposed antenna is formed by an L-shaped radiator, a rectangular frame ground with an L-shaped stub, and a rectangular strip at the opposite corner. The microstrip antenna can generate four frequency bands, covering WIFI-6E (5925–7125 MHz), 5G n77 (3300–4200 MHz), n78 (3300–3800 MHz), and the GNSS bands. This antenna generates right hand circular polarization (RHCP) waves in the low frequency band (0.95–2.11 GHz), covering GPS, BDS, GLONASS, and GALILEO applications. Moreover, an L-shaped aperture and three rectangular slits are cut on the ground to broaden the axial-ratio bandwidth at the upper band. A prototype is fabricated and measured to verify the performance of this design. It is shown that the agreement between the simulation and measurement is satisfactorily good. The measured −10 dB bandwidths for each band are 75.8% (0.95–2.11 GHz), 55.8% (3.05–5.39 GHz), 39.9% (5.84–8.19 GHz) and 10.3% (9.14–10.68 GHz), respectively. While the measured 3 dB axial-ratio bandwidths are 59.4% (1.16–2.14 GHz), 35.8% (3.23–4.64 GHz), 8.4% (5.70–6.20 GHz), and 2.6% (7.51–7.71 GHz), the measured gains are 4.56, 2.28, 4.26, and 4.30 dBi at 1.5 GHz, 3.8 GHz, 6 GHz, and 7.6 GHz, respectively.

30 September 2022 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
Xiaoming LiuXiaoming Liu
Xiaoming Liu
DZDan Zhang
Dan Zhang
SYShuo Yu
Shuo Yu
CWChen Wang
Chen Wang
XYXiaofan Yang
Xiaofan Yang
YWYe Wang
Ye Wang
Low permittivity materials are widely used in many electronic systems. However, dielectric measurement on low permittivity material is challenging. To address this difficulty, a dual-band resonant sensor is developed. The proposed sensor is an improved design from the complementary square spiral resonator (CSSR). By adding a square patch on top of the resonant cell, the local field is significantly increased. Therefore, the interaction between field and material is strengthened, resulting in an enhancement in measurement sensitivity. Owing to the increased sensitivity, low permittivity samples down to 1.19 can be measured with an accuracy of better than 3%. Such results demonstrate that this sensor is promising for low permittivity characterization. Moreover, this sensor is also capable of measuring samples with permittivity in the range of 2–10, with an accuracy of 5%. Furthermore, two resonances are created, enabling dual-band operation. The unloaded resonances take place at 2.00 and 5.41 GHz. Particularly, the measurement can be conducted simultaneously in the two operation bands. Measured results demonstrate that the accuracy and sensitivity are satisfactorily high and comparatively superior to the designs in the literature for low permittivity measurement.