The Andronov–Hopf virtual oscillator control is a grid-forming control strategy based on instantaneous current feedback, which provides voltage and frequency support in weak grids. However, the unavoidable power coupling and inherent inaccuracies in power tracking control lead to steady-state errors and dynamic oscillations, which severely restrict the power delivery and the grid support capability. Therefore, this article proposes an optimized loop-shaping-based power control (OLPC) strategy to ensure system stability. First, to address the inability of the relative gain array to evaluate feedback dynamics, a closed-loop transfer function array is developed. It explicitly reveals two limitations: failure to achieve power decoupling and amplification of reactive power tracking errors. Subsequently, the objectives of OLPC are formulated in the frequency domain using bandwidth design specifications. Then, the optimal parameters are obtained by reformulating the parameter design problem as a convex optimization problem. Compared to the virtual inductor methods, the OLPC exhibits superior wide-frequency power decoupling, more accurate reactive power tracking, and faster power response. Finally, the theoretical analysis and proposed method are validated through experiments.
1 January 2026 in IEEE Transactions on Industrial Electronics
Fault-tolerant control (FTC) can ensure the three-level T-type inverter (3LT2I) maintains reliable operation when switch is faulty. However, existing FTC strategies exhibit poor output performance and limited neutral-point voltage control (NPVC) ability within the full-range of modulation index (MI) and power factor (PF). To this end, this paper proposes an FTC and NPVC strategy for 3LT2I within full MI and PF range based on modulation signal clamping and decomposition, which improves the system reliability and output performance simultaneously. First, a fundamental cycle is divided into six regions according to the operating conditions when switch fault occurs for independent modulation. Second, the modulation signal is clamped to realize FTC in partial regions and increase NPVC ability in other regions. Furthermore, to realize FTC over the full regions and maximize NPVC ability, the modulation signal is decomposed by selecting the optimal decomposed phase and calculating an accurate decomposition value. The proposed strategy is simple to implement and superior to existing strategies in NPVC ability, output quality and power losses under the full-range of MI and PF. Finally, the effectiveness and superiority of the proposed strategy are validated by experimental results.
1 January 2026 in IEEE Journal of Emerging and Selected Topics in Power Electronics