5 October 2020 in IEEE Transactions on Electron Devices
We propose, for the first time, an indium gallium zinc oxide (IGZO)-based 2T1C compute cell (IGZO-cell) for analog in-memory computing. To assess the impact of an IGZO-cell-based array including the periphery on power and accuracy, a PyTorch framework was developed to analytically modeled analog components. The results are reported for a ResNet20 network on the Canadian Institute For Advanced Research-10 (CIFAR-10) benchmark. The state-of-the-art energy efficiency of 15 peta operations per second (POPS)/W including the periphery is achieved by using our proposed IGZO-cell with CMOS compatibility. Finally, it is shown that, with a properly trained neural network model, there is no degradation of test accuracy with 10% device to device variability for the IGZO devices.
12 August 2024 in IEEE Transactions on Electron Devices
HfOx-based ferroelectric random access memories (FeRAMs) have been proposed as a promising candidate to further dynamic random access memory (DRAM) scaling. This article presents a bitcell design space exploration of HfZrOx-based FeRAM based on a 2T1C testbench representative of a 64-kb 1T1C subarray at 40-nm CMOS technology. We first explore the impact of ferroelectric capacitor (FeCAP) sizing on the read sensing margin (SM) and speed with eight different blocks in the subarray, supported by a hardware-calibrated FeCAP compact model. We identify the capacitance ratio ( ${C} _{\text {R}}$ ) between the bitline parasitic capacitance ( ${C} _{\text {BL}}$ ) and the FeCAP capacitance ( ${C} _{\text {FE}}$ ) as the critical design parameter for bitcell SM optimization, with a maximum ${C} _{\text {R}}$ of 41 permitted for the given FeCAP technology. Furthermore, we investigate the impact of FeCAP sizing on ferro-grain granularity (FGG)-induced variability. Our findings clarify that SM variability worsens with increasing FeCAP size but does not significantly affect the readability overall. Additionally, we examine the consequences of FeCAP sizing on disturbance effects during write operations, concluding that larger FeCAPs help mitigate write disturbances by reducing voltage transfer to half-selected (HS) cells.
28 November 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Main memory system design and corresponding technology requirements have become increasingly challenging for data-dominated high-performance applications. To address the leakage and scalability issues of the conventional DRAM-based memory, new memory technologies with ultra-low leakage and potential for high scalability have been explored extensively over the last decade. However, none of them are mature enough to serve as a drop-in replacement for DRAM. In this paper, we propose a hybrid main memory system solution for utilizing new memory technologies with specific features, based on the target application characteristics and system configurations. To this end, we examine two new memories, 1S-1VCMA and IGZO-based DRAM, along with conventional DRAM in the context of hybrid main memory solutions for high-capacity and low-power Pareto-optimizations, respectively. To better evaluate the power and performance, we consider the page-fault modeling in our evaluations. The results of the simulation show that different combinations of memory technologies in the hybrid memory system, different memory capacities, and different storage systems could provide a promising solution in the system regarding the characteristics of running applications and the requirements of the system.
20 April 2021 in IEEE Transactions on Device and Materials Reliability
Electromigration (EM) has emerged as a major reliability concern for interconnects in advanced technology nodes. Most of the existing EM analysis works focus on the power lines. There exists a limited amount of work which analyzes EM failures in the signal lines. However, various emerging spintronicbased memory technologies such as the Spin Transfer Torque Magnetic Random Access Memory (STT-MRAM) and the Spin Orbit Torque Magnetic Random Access Memory (SOT-MRAM) have high current densities as compared to the conventional Static Random Access Memory (SRAM). These high current densities can lead to EM failures in the signal lines such as bit-line (BL) of these memories. Furthermore, these signal lines have workloaddependent stress as opposed to the conventional DC stress of power distribution networks. In this work, we model the EM failures in the BL of a typical STT memory array with realistic workloads. The analysis is based on physics-based EM model, which is calibrated based on industrial measurement data. The results show that the current densities in the STT arrays can be large enough to cause EM failures in the signal lines with running realistic workloads and that these failures are highly workload-dependent.
10 March 2022 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Electromigration (EM) has been known as a reliability threatening factor for back-end-of-the-line interconnects. Spin Transfer Torque Magnetic RAM (STT-MRAM) is an emerging non-volatile memory that has gained a lot of attention in recent years. However, relatively large operational current magnitude is a challenge for this technology, and hence, EM can be a potential reliability concern, even for the signal lines of this memory. A workload-aware EM modeling needs to capture time-dependent current density in the memory signal lines, and to be able to predict the effect of the EM phenomenon on the interconnect for its entire lifetime. In this work, we present methods to effectively model the workload-dependent EM-induced meantime to failure (MTTF) in typical STT-MRAM arrays under a variety of realistic workloads. This allows performing the design space exploration to co-optimize reliability and other design metrics.
11 November 2026 in IEEE Transactions on Computers