This paper deals with a pulsed power supply system combining flywheel energy storage system (FESS) and a modular multilevel cascade converter (MMCC) for power compensation in performing rapid excitation of highly inductive and pulsed heavy loads. The FESS system consists of an induction motor with a flywheel to store kinetic energy. Parallelly connected capacitors cause self-excitation phenomena in an induction motor, and it works as an induction generator. Furthermore, the induction generator generates more than twice of electric power of its rated value for a short time. We can apply the proposed FESS to particle accelerators for physics experiments or medical use, and plasma shape and position control in pulsed nuclear fusion devices that require pulsed highpower. In addition, the coils in these applications that generate magnetic fields have large inductances. In plasma control and repetitive operation applications, it is necessary to change current rapidly. We can realize high-speed current control by using the proposed MMCC that can output a voltage higher than the input voltage. By combining the FESS and MMCC, a power supply may be realized with the ability to implement rapid current control while compensating for large power consumption and without significant load disturbance on the power grid.
19 March 2020 in IEEE Transactions on Applied Superconductivity
Tokamak devices with non-superconducting coils must be equipped with pulsed power supplies employing energy storage system when the devices cannot receive electricity from power grids directly. Flywheel energy storage system (FESS) for the coil power supplies have been used only in large or middle-sized tokamak devices since they employed synchronous motor generators (SMGs), which have difficulty in downsizing and maintenance. In our previous research, FESS with induction motor generators (IMGs) utilizing self-excited phenomena was developed. In this paper, using two novel concepts of multiple IMGs and installing a multistage converter, both of design flexibility and coil current ripple reductions are realized. As an experimental result, a peak load power of 778 kW and an electric energy supply of 408~kJ to the dummy coil were achieved using a toroidal field coil power supply (TFCPS) of a tokamak device, PLATO.
1 April 2022 in Journal of Physics: Conference Series
Reverse calculation of negative ion trajectory based on the measured beam emittance has been performed for the first time in multi-stage accelerator in order to reconstruct negative ion profile near meniscus, which has been a long-term issue for negative ion sources. According to reverse calculation, negative ions are mainly extracted from the periphery of extraction area, and the particles extracted from the aperture edge is lost on acceleration grids. By taking into account the lost component with reconstructed negative ion profile, the negative ion trajectory became consistent with observed beam traces on the acceleration grids. This result can be applied directly to the design of ITER accelerator as well as the other Cs-seeded negative ion sources.
A scaling technique has been developed in order to predict the voltage holding capability of the world-largest electrostatic accelerator for fusion application having a long gap vacuum insulation around 1 m with large surface area of more than 6 m 2 . One of critical issues for design of such large-size accelerator is the development of the prediction model based on the experimental results. For this purpose, the 1/5 scale mockup has been developed, which is composed of the 5-stage accelerator with the high voltage bushing in the vacuum vessel. Direct comparison of the sustainable voltages in the 1/5 scale and full-scale high voltage busing only shows that a voltage scaling in 1/5 scale size is 55%. It was found that the voltage scaling is consistent with the prediction based on the empirical scaling according to the surface area and gap length. As a result, the voltage holding capability of the 1/5 scale mockup is 400 kV in the experiment, which indicates an estimation of 720 kV in full-scale with a real configuration. This is the first experiment-based prediction of the voltage holding capability for the largest accelerator for ITER. The improvement of the voltage holding capability has been already planned by using multi-layer electrostatic shields. In such experiment, the developed scaling technique is useful to predict the voltage holding capability for large vacuum components which can not be easily tested.