1 December 2020 in Global Nuclear Safety
The article deals with the results of empirical modeling of the oil system of the main circulation pumps of a nuclear power plant, designed for oil supply to support bearings and their cooling. The empirical model extends the industrial monitoring platform with a sliding linear predictor to maintain the operational safety and operability of the MCP. The initial data for the predictor are the controlled parameters of the MCP.
21 June 2023 in Global Nuclear Safety
The drive of the reactor control and protection system (CPS) is a system of normal operation, important for safety. Malfunctions of the drives of the ARC type CPS are often the initial events for accidents leading to unauthorized downtime. The currently existing standard methods for monitoring the parameters of the CPS do not allow for a reliable assessment of the condition of the drives. In this paper, it is proposed to implement an approach that provides an increase in sensitivity when recognizing the states of the drives of the ARC control system by processing the initial signals, which are vibroacoustic signals registered on the lid of the upper unit of the VVER reactor. A procedure for processing diagnostic signals using singular spectrum analysis is proposed. The proposed approach differs from the known ones by the presence of a scaling procedure, which is implemented by multiplying the eigenvalue matrices by the gankelized matrices of the source data. Due to scaling, the necessary sensitivity increase is provided. The expected increase in sensitivity is based on the fact that the eigenvalues reflect the structure of the signals, which changes significantly under the influence of the defect. The proposed method was used to process vibroacoustic signals registered on the lid of the upper block of the VVER reactor unit. Experimental studies were carried out at the test stand of Izhorskiye Zavody OJSC. The results of processing experimental data indicate a high quality of diagnosis. The hypothesis was clearly confirmed that the difference in the structure of diagnostic signals of serviceable and faulty equipment can manifest itself in the eigenvalues of the gankel signal matrices. The approach proposed in the article to the processing of diagnostic signals is easily amenable to automation and can be implemented in the development of a diagnostic system for the drive of an ARC-type CPS.
20 December 2025 in Global Nuclear Safety
The paper presents a universal approach (not based on specific degradation laws) to identifying the current states of NPP technological systems. A fragment of the technological system is analysed in the space of diagnostic features (parameters) with a dominant criterion. The system boundary of the selected fragment is the surface formed by the normative restrictions on the values of diagnostic features. A probabilistic mapping of the system is constructed in a unit hypercube on the time series of parametric monitoring to represent its evolution in terms of degradation (movement towards normative boundaries). The constructed virtual (possible digital) image of the system is approximated by a Kolmogorov-Gabor polynomial which is used as an extrapolator. The predictive capabilities of the approach are investigated for a real object: «The Oil System of the Main Circulation Pump (MCP)». The methodology is a simplified version of multidimensional statistical analysis, where the multidimensional distribution function of parameters is not normal and cannot be restored in real time. The classical theory is replaced by the task of identifying one-dimensional empirical distribution functions of diagnostic feature measurements in space. The method has proven itself well in cases of degradation such as wear, ageing, deposit formation, and surface erosion. The ability to predict instantaneous failures (limit exceedance jumps) is implemented based on disturbances in the corresponding distribution functions. The method requires a large amount of statistical material, so it is preferable for monitoring stationary modes of equipment operation or processing archives. It is expected to be used in programming «observers» to monitor the development of abnormal situations and training neural networks.
27 June 2024 in Global Nuclear Safety
This work is devoted to the problem of neutron field formation near elliptical orbits of space objects equipped with nuclear power plants. The high-energy part of the fission spectrum is not affected by the gravitational field. Radiation safety is ensured by the triad fair for a point source: activity-distance-time. The connection between space object orbit parameters and neutron flux density occurs for the thermal (near-thermal) part of the spectrum. The possibility of formation of a stable neutron trace in the volume of a «torus» around the orbit of a space object is considered. The paper presents theoretical and numerical evidence of the validity of the hypothesis put forward. The introduction considers the separation effect of Galileo's relativity principle in the case of rectilinear uniform motion of a point isotropic neutron source on a plane. The occurrence of angular asymmetry of the neutron distribution in a stationary coordinate system when their relative velocity is close to the transport velocity of the source is illustrated. Under these conditions, a significant velocity dispersion of initially monochromatic neutrons is also recorded. This expected fundamental kinematic effect determines the characteristic distribution of neutrons in the gravitational field when the source moves along the Kepler orbit. The solution of the problem is carried out in the velocity space. It is argued that if the distribution of neutrons in the velocity space is such that their velocities are collinear to the orbital velocity of the source, this indicates the existence of a neutron flux near the orbit. The problem is analysed on the example of one revolution of a hypothetical space station by simulation modelling. For this purpose, thermal neutron packets with isotropic angular distribution were generated at eight points of an elliptical orbit. The neutron and source velocity fluxes at the selected points of the orbit were compared in a coordinate system related to the earth. The obtained data made it possible to calculate the densities of neutron velocity fluxes to the front and rear hemispheres relative to the source orbital motion as a function of the polar angle, while the value of the determinant of the correlation matrix – an indicator of collinearity of neutron velocity vectors in the flux - was fixed. The results of the studies confirm the hypothesis put forward about the possibility of formation of a «trace» in the orbit of a thermal neutron source, which determines the need to take it into account as a significant component of radiation risk.
17 December 2021 in Global Nuclear Safety
The article presents the results of identifying pre-failure conditions. The results based on fractal analysis and nonparametric statistics. The NPP equipment units are highly reliable systems for long life cycle. These systems are characterized by slow graduating failures. This happens due to the accumulation of irreversible damage. Standard information measuring systems supply time series. They are traditionally processed by parametric methods. The processing of experimental data can be automated for industrial monitoring of NPP equipment parameters.
1 March 2020 in Global Nuclear Safety
The article deals with the concept of monitoring based on nonparametric statistics. It is supposed the possible application to monitor the technological systems of nuclear power plants. Modern complex plants and technogenic objects are equipped with industrial monitoring systems. The evolution of such systems in natural form is the generation of alternative concepts, constructs, and items selection for efficiency during operation