31 August 2020 in IEEE Access
This paper presents an X/Ku dual-band switch-free reconfigurable GaAs low-noise amplifier (LNA) realized by inter-stage and output-stage coupled lines. This paper is the first switch-free reconfigurable LNA design in the coupled lines structure. After amplified by the broadband drive stage, the input signal is divided into two parallel single-band stages (consists of a high-band stage and a low-band stage) by the proposed inter-stage coupled line. Two split-band signals are combined by the proposed output-stage coupled line into the output port after amplified by the single-band stages. The proposed coupled lines are also included in LNA matching networks. Dual-band operation of the proposed reconfigurable LNA is achieved by turning off drain voltages of the unused single-band transistors. The reconfigurable LNA is designed in a 0.15-μm E-mode GaAs pHEMT process. The fabricated LNA features small-signal gains of 25-25.2/20.1-28 dB, noise figure (NF) of 1.28-1.41/1.23-1.51 dB, and output 1-dB compression point of 0.5-1.7/2.2-5 dBm over 8-10/12-20 GHz, while consuming 76/91 mA of dc current, with a size of 2.0×1.8 mm2.
17 January 2022 in IEEE Microwave and Wireless Components Letters
This letter presents an $X$ / Ku dual-band switchless power amplifier (PA) with frequency reconfigurable operation in a 0.25- $\mu \text{m}$ GaAs pHEMT process. The proposed reconfigurable PA consists of one dual-band drive amplifier and two single-band amplifiers in parallel. The first stage drive amplifier works in dual-band mode of $X$ -band and Ku -band, and the two single-band amplifiers work in $X$ -band and Ku -band, respectively. An interstage coupled line is used to split the dual-band frequencies into high-band ( Ku -band) and low-band ( $X$ -band), and the output-stage coupled line acts as a combiner. The operating frequency band of the proposed PA can be changed by turning off drain voltages of unused single-band amplifiers. Measurements results show that the proposed reconfigurable PA features a maximum power-added efficiency (PAE) of 44.4% and a power gain of 19.6 dB while delivering an output power of 29.6 dBm at 8.5–9.5 GHz of the low-band mode. At 15.5–16.5 GHz of the high-band mode, the PA achieves a maximum PAE of 38.4%, a power gain of 18.1 dB with an output power of 30.1 dBm. The chip area of the proposed reconfigurable PA is 2 $\times $ 2 mm 2 including all RF and dc pads.
12 November 2022 in Microwave and Optical Technology Letters