We have developed a 1 kHz repetition picosecond laser system dedicated for intense terahertz (THz) pulse generation. The system comprises a chirped pulse amplification laser equipped with a Yb:YAG thin-disk amplifier. At room temperature, the Yb:YAG thin-disk regenerative amplifier provides pulses having energy of over 10 mJ and spectral bandwidth of 1.2 nm. The pulse duration achieved after passage through a diffraction grating pair compressor was 1.3 ps. By employing this picosecond laser as a pump source, THz pulses having a peak frequency of 0.3 THz and 4 µJ of energy were generated by means of optical rectification in an Mg-doped LiNbO3 crystal.
The development of a 1.65 µm cavity ringdown methane spectrometer for methane isotope analysis is reported. In order to reduce the laser linewidth, simple optical feedback with an 11 m external fiber cavity using a retroreflector was implemented and it improved the sensitivity. The detection limit at the ppt level for both 12CH4 and 13CH4 concentrations at 100 Torr gas pressure was evaluated from the Allan–Werle plot calculated from the dataset obtained at the fixed laser frequency. In contrast, the detection limit estimated from the baseline noise on the absorption spectrum was a few ppb for both methane isotopologues due to the periodic background oscillations that remained even after baseline correction. The system demonstrated the direct measurement of ambient methane in atmospheric room air, and the estimated 13CH4 ratio as well as the methane concentration were in good agreement with the reference values of ambient air.
We have proposed a novel design for a contact grating setup with an incorporated Fabry-Perot resonator for intense terahertz (THz) light generation. This setup is scalable and extremely compact as compared with the conventional LiNbO3 prism setup. We evaluated the THz generation process in the device by experimental and calculated studies, and optimized the device to obtain maximum THz output.