1 September 2016 in AIAA Journal
The time-averaged behavior of gap flow between two stationary side-by-side circular cylinders immersed in the subcritical Reynolds number regime and its variation with gap spacing are presented. A series of experiments and numerical simulations are performed. Results reveal that gap flow, which is the flow passing between the cylinders, can be classified broadly into pressure- and momentum-driven regimes, depending on the spacing ratio (), where is the transverse center-to-center spacing between the cylinders and is the cylinder diameter. The pressure-driven regime occurs for roughly , where the mean velocity of the gap flow increases as the spacing ratio increases. The momentum-driven regime follows with a monotonic decrease in the mean velocity as the spacing ratio increases when . Within the pressure-driven regime, subtransitions of the gap flow are further classified, based on distinct changes in the circumferential static pressure distribution, as well as the velocity profile, transverse pressure gradient, and mean velocity at the throat of the two cylinders.
10 March 2015 in Experiments in Fluids
1 November 2022 in Physics of Fluids
A single-winged maple seed (samara) is dispersed laterally by a crosswind in contrast to simply descending straight down (zero dispersion) in quiescent air. This article presents the general kinematic response of a particular type of samaras (Acer buergerianum) in stable autorotation to the disturbance of a concentrated crosswind (simulated via slot jet) with the crosswind strength varied distinctively from weak to strong. A relatively weak crosswind slower than the tip velocity of the stably autorotating samara causes only damped undulations of its descent trajectory. In contrast, we demonstrate that the samara exhibits a bi-modal response when disturbed by a relatively strong crosswind (velocity greater than samara tip velocity). The strong crosswind enables the samara either to float laterally with the crosswind or drop-out through the crosswind with the switching of its rotational direction. Regardless of crosswind strength, stable autorotation is re-established after the samara leaves the crosswind zone, albeit accompanied by large-scale undulations in its descent trajectory. More importantly, before landing, the samara regains its original terminal descent velocity achieved in quiescent air.
9 December 2024 in Journal of Fluids Engineering
The wakes shed alternatively from two long stationary side-by-side cylinders have long been an issue in many engineering applications, such as wind energy harvesting schemes that utilize vortex-induced vibrations. In this study, switching events of the wakes shed from two “short,” “flapping” side-by-side cylinders are investigated. To this end, the flow visualization and spectral analysis of the time-resolved data from hot-wire anemometers and the piezoelectric mount of flapping cylinders are carried out. Measurements are conducted with differing center-to-center spacing normalized by a single cylinder diameter (T/D) – gap ratio, and length-to-diameter ratio (L/D) in a Reynolds number range of 800 ≤ ReD ≤ 16,000. The results demonstrate the transition of wake shedding patterns, sequentially from a single bluff body wake, first bi-stable wakes, tri-stable wakes, second bi-stable wakes, and eventually to coupled wakes as the gap ratio is increased. Furthermore, the role of shortness and flapping of the two cylinders in determining the wake kinematics is elucidated, and the transitional sequences and switching of dominant shedding frequencies are detailed.
17 March 2025 in Tribology - Materials, Surfaces & Interfaces
The research evaluates the impact of Sargassum algae methyl ester (SAME20) with 50 and 100 ppm silicon dioxide (SiO 2 ) nanoparticles on the performance and emissions of a single-cylinder, four-stroke diesel engine. SiO 2 nanoparticles were characterized using FTIR, SEM, and TEM. Diesel, SAME20, SAME20 + 50 ppm of SiO 2 , and SAME20 + 100 ppm of SiO 2 blends were tested at 1500 rpm under loads from 25% to 100%. The SAME20 + 100 ppm of SiO 2 blend outperformed others, improving brake thermal efficiency by 1.43% and reducing brake-specific fuel consumption by 5.35% compared to diesel. It also decreased HC, CO, and smoke emissions by 11.12%, 18.1%, and 16.2%, respectively, with a slight NO x increase. Tribological analysis using a four-ball tribometer showed the SAME20 + 100 ppm of SiO 2 blend reduced the coefficient of friction by 76.89% and wear scar diameter by 59.19%. SEM analysis confirmed reduced surface wear and damage, highlighting improved engine and tribological performance.