10 September 2024 in Acta Geophysica
Recently, the seabed classification method based on back-scattering data of multi-beam echo-sounder (MBES) is widely used to analyze the distribution of seabed sediment. Although various analysis methods for seabed classification using multi-spectral MBES have been developed, they are limited in securing penetration depth to consider the characteristics of the shallow subsurface structure. In this study, the seabed and ultra-shallow subsurface classification was performed by comparative analysis of box corer sampling, back-scattering, and 2D/3D ultra-high-resolution (UHR) seismic data obtained from Yeongil Bay, South Korea. We proposed a process for seismic ultra-shallow subsurface classification by the segmentation of the primary seabed reflection wavelet and the amplitude analysis. The seabed-reflected amplitude and back-scattering intensity showed similar mapping trends in the relatively homogeneous and thick surface sediment. On the other hand, it was confirmed that back-scattering data and seabed-reflected amplitude show different patterns when the subsurface structure is related to the seabed surface. It is presumed that because seismic data containing relatively low-frequency components have a deeper penetration depth than MBES, they contain more characteristics of the ultra-shallow subsurface than back-scattering data. These were determined that back-scattering has advantages in representing acoustic anomaly distribution by surface sediment type, and seabed-reflected amplitude is advantageous for representing sediment type by ultra-shallow subsurface. In particular, these results were well shown when the surface sediment thinly covered the rocky bottom. Therefore, it is necessary not only to analyze the back-scattering of MBES but also the ultra-shallow subsurface features through seismic data for valid seabed classification.
14 January 2025 in Geo-Marine Letters
14 June 2026 in Acta Geophysica
Shallow marine seismic surveys commonly rely on portable seismic sources such as small air-gun and high-frequency sparker sources, each characterized by distinct frequency content and imaging capabilities. While air-guns provide superior penetration depth and structural continuity, sparkers offer high vertical resolution for shallow subsurface imaging. Integrating these complementary datasets to obtain broadband seismic responses remains challenging, primarily due to differences in source wavelets and phase characteristics. This study proposes a phase-consistent broadband seismic synthesis method for a shallow marine coastal area, based on simultaneously acquired small air-gun and sparker data along the same survey line. To ensure physical consistency prior to synthesis, deterministic pre-processing steps were applied, including source wavelet estimation, de-bubbling, de-signature, and band-limited spectral whitening. Phase alignment was then achieved using a convolution-based approach, where the air-gun source wavelet served as a low-frequency-stable reference. Multiple candidate reference wavelets were examined, and the applicable frequency band was selected for synthesis. The resulting broadband seismic section demonstrates improved reflector continuity and enhanced shallow resolution without phase distortion, compared to the individual datasets. Spectral analysis confirms balanced frequency band expansion. The results highlight that phase consistency is a critical prerequisite for physically meaningful broadband synthesis and demonstrate the effectiveness of the proposed method for shallow marine seismic imaging.
1 October 2021 in Journal of the Korean Society of Mineral and Energy Resources Engineers
5 January 2025 in Interpretation
The shallow region of a 3D seismic data set acquired in Yeongil Bay, Pohang, exhibits various interesting features. In particular, the region exhibits bright circular seismic amplitude anomalies. These anomalies are located in a topographic low of the seismic data surrounding the structural high from the northern, southern, and eastern ends. The anomalies are confined to a temporal region of the seismic data and exhibit a concave-down appearance when viewed in cross section. Although such bright seismic amplitudes can often be a direct indicator of hydrocarbon presence, to avoid misinterpreting this feature, multiattribute analyses are applied to the data. The abnormal structural characteristics are further examined by applying a geometric attribute analysis to emphasize the coherency of the signals within the region of anomaly distribution. We also apply a physical attribute analysis to determine that these anomalies can result from changes in lithology, most likely a sandy formation, which can be inferred from a stratigraphic analysis of the Pohang Basin. Recent findings suggest the possibility of hydrocarbon presence in the study region, but we cannot rule out other possibilities without well-log data to specify the physical characteristics.
18 December 2025 in Research Square
Seismic surveys in coastal and shallow waters have gained increasing importance due to the growing demand for marine infrastructure development, coastal ground stability assessment, and environmental monitoring. However, in coastal waters with depths of approximately 5–30 m, limitations such as restricted vessel operation, short offsets, and a lack of low frequency components make it difficult to obtain reliable long wavelength velocity models. This study proposes a strategy to regenerate secondary bubble signals from an air-gun source—typically treated as components to be removed—as effective low frequency information in shallow marine seismic data obtained using a portable air-gun/streamer system. Using deterministic deconvolution with the source wavelet, the primary reflections were separated from the raw data, and the residual between them was used to construct the secondary bubble–dominant dataset. The long wavelength velocity structure was then inverted using direct envelope reflection based full waveform inversion (DE-RFWI). Application to field data acquired in the Yeongil Bay area of Pohang demonstrates that the proposed approach provides a more structurally consistent long wavelength velocity model compared with primary-based FWI, confirming that reliable velocity models can be obtained even under short-offset and low frequency-deficient conditions. This study offers a practical framework that overcomes the inherent limitations of portable shallow marine seismic systems and enhances subsurface property modeling in coastal and transition zone environments.