Tzu-Hao Huang

Tzu-Hao Huang

Auto-generated profile, based on publicly available information

Tzu-Hao Huang

Mechanical Engineering, City College of New York, New York, NY United States of America 10032

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 May 2020 in Science Advances
Verified
Journal Article
Open access
PDF file
Yichao TangYichao Tang
Yichao Tang
YCYinding Chi
Yinding Chi
JSJiefeng Sun
Jiefeng Sun
THTzu-Hao Huang
Tzu-Hao Huang
OMOmid H. Maghsoudi
Omid H. Maghsoudi
JYJie Yin
Jie Yin
Soft machines typically exhibit slow locomotion speed and low manipulation strength because of intrinsic limitations of soft materials. Here, we present a generic design principle that harnesses mechanical instability for a variety of spine-inspired fast and strong soft machines. Unlike most current soft robots that are designed as inherently and unimodally stable, our design leverages tunable snap-through bistability to fully explore the ability of soft robots to rapidly store and release energy within tens of milliseconds. We demonstrate this generic design principle with three high-performance soft machines: High-speed cheetah-like galloping crawlers with locomotion speeds of 2.68 body length/s, high-speed underwater swimmers (0.78 body length/s), and tunable low-to-high-force soft grippers with over 1 to 103 stiffness modulation (maximum load capacity is 11.4 kg). Our study establishes a new generic design paradigm of next-generation high-performance soft robots that are applicable for multifunctionality, different actuation methods, and materials at multiscales.

18 May 2020 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
SYShuangyue Yu
Shuangyue Yu
THTzu-Hao Huang
Tzu-Hao Huang
XYXiaolong Yang
Xiaolong Yang
CJChunhai Jiao
Chunhai Jiao
JYJianfu Yang
Jianfu Yang
Hao SuHao Su
Hao Su
High-performance actuators are crucial to enable mechanical versatility of wearable robots, which are required to be lightweight, highly backdrivable, and with high bandwidth. State-of-the-art actuators, e.g., series elastic actuators, have to compromise bandwidth to improve compliance (i.e., backdrivability). In this article, we describe the design and human-robot interaction modeling of a portable hip exoskeleton based on our custom quasi-direct drive actuation (i.e., a high torque density motor with low ratio gear). We also present a model-based performance benchmark comparison of representative actuators in terms of torque capability, control bandwidth, backdrivability, and force tracking accuracy. This article aims to corroborate the underlying philosophy of “design for control,” namely meticulous robot design can simplify control algorithms while ensuring high performance. Following this idea, we create a lightweight bilateral hip exoskeleton to reduce joint loadings during normal activities, including walking and squatting. Experiments indicate that the exoskeleton is able to produce high nominal torque (17.5 Nm), high backdrivability (0.4 Nm backdrive torque), high bandwidth (62.4 Hz), and high control accuracy (1.09 Nm root mean square tracking error, 5.4% of the desired peak torque). Its controller is versatile to assist walking at different speeds and squatting. This article demonstrates performance improvement compared with state-of-the-art exoskeletons.

14 August 2019 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
XYXiaolong Yang
Xiaolong Yang
THTzu-Hao Huang
Tzu-Hao Huang
HHHang Hu
Hang Hu
SYShuangyue Yu
Shuangyue Yu
SZSainan Zhang
Sainan Zhang
Hao SuHao Su
Hao Su
Back injuries are the most prevalent work-related musculoskeletal disorders and represent a major cause of disability and socio-economic problems. Although innovations in wearable robots aim to alleviate this hazard, the majority of existing exoskeletons are obtrusive because the rigid linkage design limits natural movement, thus causing ergonomic risk. Moreover, these existing systems are typically only suitable for one type of movement assistance, not ubiquitous for a wide variety of activities. To fill in this gap, this paper presents a new wearable robot design approach continuum soft exoskeleton. This wearable robot is unobtrusive and assists both squat and stoops while not impeding walking motion. To tackle the challenge of the unique anatomy of spine, our robot is conformal to human anatomy and it can reduce multiple types of forces along the human spine such as the spinae muscle force, shear, and compression force of the lumbar vertebrae. We derived kinematics and kinetics models of this mechanism and established an analytical biomechanics model of human-robot interaction. Quantitative analysis of disc compression force, disc shear force and muscle force was performed in simulation. We further developed a virtual impedance control strategy to deliver force control and compensate hysteresis of Bowden cable transmission. The feasibility of the prototype was experimentally tested on three healthy subjects. The root mean square error of force tracking is 6.63 N (3.3 % of the 200N peak force) and it demonstrated that it can actively control the stiffness to the desired value. This continuum soft exoskeleton represents a feasible solution with the potential to reduce back pain for multiple activities and multiple forces along the human spine.

3 June 2022 in IEEE Transactions on Robotics
Verified
Journal Article
Closed access
THTzu-Hao Huang
Tzu-Hao Huang
SZSainan Zhang
Sainan Zhang
SYShuangyue Yu
Shuangyue Yu
MMMhairi K. MacLean
Mhairi K. MacLean
JZJunxi Zhu
Junxi Zhu
Hao SuHao Su
Hao Su
State-of-the-art exoskeletons are typically limited by the low control bandwidth and small-range stiffness of actuators, which are based on high gear ratios and elastic components (e.g., series elastic actuators). Furthermore, most exoskeletons are based on discrete gait phase detection and/or discrete stiffness control, resulting in discontinuous torque profiles. To fill these two gaps, we developed a portable, lightweight knee exoskeleton using quasi-direct-drive (QDD) actuation that provides 14 N·m torque (36.8% biological joint moment for overground walking). This article presents 1) stiffness modeling of torque-controlled QDD exoskeletons and 2) stiffness-based continuous torque controller that estimates knee joint moment in real-time. Experimental tests found that the exoskeleton had a high bandwidth of stiffness control (16 Hz under 100 N·m/rad) and high torque tracking accuracy with 0.34 N·m root mean square error (6.22%) across 0–350 N·m/rad large-range stiffness. The continuous controller was able to estimate knee moments accurately and smoothly for three walking speeds and their transitions. Experimental results with eight able-bodied subjects demonstrated that our exoskeleton was able to reduce the muscle activities of all eight measured knee and ankle muscles by 8.60%–15.22% relative to the unpowered condition and two knee flexors and one ankle plantar flexor by 1.92%–10.24% relative to the baseline (no exoskeleton) condition.

26 July 2019 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
SYShuangyue Yu
Shuangyue Yu
THTzu-Hao Huang
Tzu-Hao Huang
DWDianpeng Wang
Dianpeng Wang
BLBrian Patrick Lynn
Brian Patrick Lynn
DSDina Sayd
Dina Sayd
Hao SuHao Su
Hao Su
This paper presents design and control innovations of wearable robots that tackle two barriers to widespread adoption of powered exoskeletons, namely restriction of human movement and versatile control of wearable co-robot systems. First, the proposed quasi-direct drive actuation comprising of our customized high-torque density motors and low ratio transmission mechanism significantly reduces the mass of the robot and produces high backdrivability. Second, we derive a biomechanics model-based control that generates biological torque profile for versatile control of both squat and stoop lifting assistance. The control algorithm detects lifting postures using compact inertial measurement unit (IMU) sensors to generate an assistive profile that is proportional to the biological torque produced from our model. Experimental results demonstrate that the robot exhibits low mechanical impedance (1.5 Nm resistive torque) when it is unpowered and 0.5 Nm resistive torque with zero-torque tracking control. Root mean square (RMS) error of torque tracking is less than 0.29 Nm (1.21% error of 24 Nm peak torque). Compared with squatting without the exoskeleton, the controller reduces 87.5%, 80% and 75% of the of three knee extensor muscles (average peak EMG of 3 healthy subjects) during squat with 50% of biological torque assistance.

5 December 2023 in Mechatronics
Verified
Journal Article
Closed access
SZSainan Zhang
Sainan Zhang
JZJunxi Zhu
Junxi Zhu
THTzu-Hao Huang
Tzu-Hao Huang
SYShuangyue Yu
Shuangyue Yu
JHJin Sen Huang
Jin Sen Huang
Hao SuHao Su
Hao Su