1 December 2016 in Journal of Transportation Engineering
This paper presents the methodology developed for the use of continuous vertical track deflection measurements from a moving loaded rail car to map the subgrade condition along a railway line. This analysis of deflection data was developed following the collection of more than 12,000 km of measurements. It was evident from the collected data that unprocessed deflection measurements are heavily effected by the track surface condition such as joints and geometry irregularities so as to obscure the deflections because of poor subgrade support. A filtering method was employed to minimize the influence of the surface condition which occur at short wavelengths and show the variations in track deflections because of changes in subgrade conditions which occur at longer wavelengths. The resulting processed data are compared with the geology over two study railway subdivisions to demonstrate that the processed vertical track deflection measurements are representative of the subgrade conditions. The filterin...
23 August 2021 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Increasing traffic and speeds on passenger rail lines, and a short season for maintenance work, have motivated the industry to find new methods to assess the condition of existing infrastructure and determine where upgrades are required. In this study, acceleration data from the car body and axle boxes of a revenue car over 92 km of a Canadian passenger rail route in Ontario were collected for two purposes: first, to apply weighted filtering method according to ISO 2631-1997 standard as a technique to determine the locations which highly impact the ride quality and to investigate the effect of type of track features and speed on the ride quality; second, a new analytical method called the envelope of acceleration was applied to use the recorded accelerations to evaluate the alignment and surface roughness along the track. Since the alignment and surface roughness values are always positive and are calculated over a specified length (e.g. 9.5 m, 18.9 m, 38 m) an envelope technique was employed which uses spline interpolations over local maxima of the absolute magnitude of accelerations at every separated n samples corresponding to best fit with track roughness. The regression analysis between the envelope of accelerations and alignment and surface roughness presented a meaningful correlation and showed the applied method is a promising analytical technique to indicate rough sections of the track. The limitations to the application of envelope of acceleration are also discussed.
16 March 2021 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Ride quality in terms of vibration is a fundamental factor affecting passengers’ satisfaction. Every year, passenger carriers invest significantly in various aspects of their system, including track and infrastructure, to improve ride quality. The assessment of ride quality and understanding the extent of the impact of different parameters on its magnitude is essential for railway operators to make informed decisions regarding capital expenditures. This paper presents a methodology for using machine learning techniques to find the correlation between various parameters (including train speed, weather conditions, presence of track features, and composition of the track substructure) and ride quality (quantified using measurements from accelerometers mounted on a rail car). The statistical model was developed using field measurements collected over a 50 km section of VIA Rail’s track in Canada. This paper describes the collected field data, the development of the statistical model, and discusses the importance of each parameter on the accuracy of the model.
1 December 2021 in Journal of Transportation Engineering, Part A: Systems
This study develops a new methodology based on computational metrology techniques to measure rail surface roughness from vertical axle-box accelerations. A VIA rail passenger rail car, operating in eastern Ontario, Canada, was instrumented with accelerometers on the car body, trucks, and axle-boxes. The rail surface was measured by a heavy track geometry inspection car. A Gaussian filter was applied to the measured rail surface data and the rail surface roughness was quantified by the root mean square (RMS), as recommended by ISO 11562 for evaluating engineering surfaces. Values of rail surface RMS roughness calculated from axle-box accelerometer data are verified with the measured surface RMS roughness. The overlap ratio and length of the moving window over which the rail surface RMS roughness is calculated are studied with respect to roughness wavelengths, statistical considerations, and maintenance planning purposes. The effect of rail car operating speed as well as the difference between axle-box accelerations measured at two axles of the instrumented rail car on the accuracy of estimating the rail surface RMS roughness are assessed. Filtering techniques and application limitations for calculating roughness are also discussed. The results of this study suggest axle-box acceleration data provide a useful assessment of rail surface roughness for the typical wavelengths between 3 and 25 m and a complementary technique to light and heavy track geometry inspections.