Yaxiong Xie

Yaxiong Xie

Auto-generated profile, based on publicly available information

Yaxiong Xie

University at Buffalo, Buffalo, New York, USA

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 July 2018 in IEEE Transactions on Mobile Computing
Verified
Journal Article
Closed access
YXYaxiong Xie
Yaxiong Xie
ZLZhenjiang Li
Zhenjiang Li
MLMo Li
Mo Li
Power delay profiles characterize multipath channel features, which are widely used in motion- or localization-based applications. The performance of power delay profile obtained using commodity Wi-Fi devices is limited by two dominating factors. The resolution of the derived power delay profile is determined by the channel bandwidth, which is however limited on commodity WiFi. The collected CSI reflects the signal distortions due to both the channel attenuation and the hardware imperfection. A direct derivation of power delay profiles using raw CSI measures, as has been done in the literature, results in significant inaccuracy. In this paper, we present Splicer, a software-based system that derives high-resolution power delay profiles by splicing the CSI measurements from multiple WiFi frequency bands. We propose a set of key techniques to separate the mixed hardware errors from the collected CSI measurements. Splicer adapts its computations within stringent channel coherence time and thus can perform well in the presence of mobility. Our experiments with commodity WiFi NICs show that Splicer substantially improves the accuracy in profiling multipath characteristics, reducing the errors of multipath distance estimation to be less than $2\;\mathrm{m}$2m. Splicer can immediately benefit upper-layer applications. Our case study with recent single-AP localization achieves a median localization error of $0.95\;\mathrm{m}$0.95m.

27 March 2023 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Verified
Journal Article
Open access
DZDuo Zhang
Duo Zhang
XZXusheng Zhang
Xusheng Zhang
SLShengjie Li
Shengjie Li
YXYaxiong Xie
Yaxiong Xie
YLYang Li
Yang Li
Daqing ZhangDaqing Zhang
Daqing Zhang
Falls are the leading cause of fatal injuries to elders in modern society, which has motivated researchers to propose various fall detection technologies. We observe that most of the existing fall detection solutions are diverging from the purpose of fall detection: timely alarming the family members, medical staff or first responders to save the life of the human with severe injury caused by fall. Instead, they focus on detecting the behavior of human falls, which does not necessarily mean a human is in real danger. The real critical situation is when a human cannot get up without assistance and is thus lying on the ground after the fall because of losing consciousness or becoming incapacitated due to severe injury. In this paper, we define a life-threatening fall as a behavior that involves a falling down followed by a long-lie of humans on the ground, and for the first time point out that a fall detection system should focus on detecting life-threatening falls instead of detecting any random falls. Accordingly, we design and implement LT-Fall, a mmWave-based life-threatening fall detection and alarming system. LT-Fall detects and reports both fall and fall-like behaviors in the first stage and then identifies life-threatening falls by continuously monitoring the human status after fall in the second stage. We propose a joint spatio-temporal localization technique to detect and locate the micro-motions of the human, which solves the challenge of mmWave's insufficient spatial resolution when the human is static, i.e., lying on the ground. Extensive evaluation on 15 volunteers demonstrates that compared to the state-of-the-art work (92% precision and 94% recall), LT-Fall achieves zero false alarms as well as a precision of 100% and a recall of 98.8%.

26 August 2024 in IEEE Transactions on Mobile Computing
Verified
Journal Article
Closed access
DZDuo Zhang
Duo Zhang
XZXusheng Zhang
Xusheng Zhang
YXYaxiong Xie
Yaxiong Xie
FZFusang Zhang
Fusang Zhang
HYHongliu Yang
Hongliu Yang
Daqing ZhangDaqing Zhang
Daqing Zhang
Long-term monitoring of human vital signs like respiration and heartbeat is crucial for the early detection of diverse diseases and overall health monitoring. Contact-free vital signs monitoring using wireless signals, particularly mmWave-based methods, has gained attention due to its sensitivity and privacy-preserving benefits. However, we observe that even minor human movements could lead to significant mutations in the signal-to-noise ratio (SNR) of the wireless signal, which cannot be explained by the commonly used model that represents the human chest as a single reflection point. These fluctuations challenge the robustness of heart rate and heart rate variability (HRV) monitoring due to the vulnerability of faint heartbeats to noise interference. To tackle this, we introduce a multi-point reflection model to understand the underlying causes of SNR fluctuations and propose a frequency diversity based algorithm to enhance sensing SNR. Our solution, Robust-Vital, was rigorously evaluated using commercial mmWave radar systems and demonstrated superior performance on long-term heart rate and heart rate variability tracking in a user study with 12 participants.

19 December 2023 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Verified
Journal Article
Open access
XZXusheng Zhang
Xusheng Zhang
DZDuo Zhang
Duo Zhang
YXYaxiong Xie
Yaxiong Xie
DWDan Wu
Dan Wu
YLYang Li
Yang Li
Daqing ZhangDaqing Zhang
Daqing Zhang
The bathroom has consistently ranked among the most perilous rooms in households, with slip and fall incidents during showers posing a critical threat, particularly to the elders. To address this concern while ensuring privacy and accuracy, the mmWave-based sensing system has emerged as a promising solution. Capable of precisely detecting human activities and promptly triggering alarms in response to critical events, it has proved especially valuable within bathroom environments. However, deploying such a system in bathrooms faces a significant challenge: interference from running water. Similar to the human body, water droplets reflect substantial mmWave signals, presenting a major obstacle to accurate sensing. Through rigorous empirical study, we confirm that the interference caused by running water adheres to a Weibull distribution, offering insight into its behavior. Leveraging this understanding, we propose a customized Constant False Alarm Rate (CFAR) detector, specifically tailored to handle the interference from running water. This innovative detector effectively isolates human-generated signals, thus enabling accurate human detection even in the presence of running water interference. Our implementation of "Waffle" on a commercial off-the-shelf mmWave radar demonstrates exceptional sensing performance. It achieves median errors of 1.8cm and 6.9cm for human height estimation and tracking, respectively, even in the presence of running water. Furthermore, our fall detection system, built upon this technique, achieves remarkable performance (a recall of 97.2% and an accuracy of 97.8%), surpassing the state-of-the-art method.

19 December 2023 in Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies
Verified
Journal Article
Open access
DZDuo Zhang
Duo Zhang
XZXusheng Zhang
Xusheng Zhang
YXYaxiong Xie
Yaxiong Xie
FZFusang Zhang
Fusang Zhang
XWXuanzhi Wang
Xuanzhi Wang
Daqing ZhangDaqing Zhang
Daqing Zhang
Millimeter wave (mmWave) radar excels in accurately estimating the distance, speed, and angle of the signal reflectors relative to the radar. However, for diverse sensing applications reliant on radar's tracking capability, these estimates must be transformed from radar to room coordinates. This transformation hinges on the mmWave radar's location attribute, encompassing its position and orientation in room coordinates. Traditional outdoor calibration solutions for autonomous driving utilize corner reflectors as static reference points to derive the location attribute. When deployed in the indoor environment, it is challenging, even for the mmWave radar with GHz bandwidth and a large antenna array, to separate the static reference points from other multipath reflectors. To tackle the static multipath, we propose to deploy a moving reference point (a moving robot) to fully harness the velocity resolution of mmWave radar. Specifically, we select a SLAM-capable robot to accurately obtain its locations under room coordinates during motion, without requiring human intervention. Accurately pairing the locations of the robot under two coordinate systems requires tight synchronization between the mmWave radar and the robot. We therefore propose a novel trajectory correspondence based calibration algorithm that takes the estimated trajectories of two systems as input, decoupling the operations of two systems to the maximum. Extensive experimental results demonstrate that the proposed calibration solution exhibits very high accuracy (1.74 cm and 0.43° accuracy for location and orientation respectively) and could ensure outstanding performance in three representative applications: fall detection, point cloud fusion, and long-distance human tracking.

14 October 2024
Verified
Conference Paper
Open access
TNTao Ni
Tao Ni
ZSZehua Sun
Zehua Sun
MHMingda Han
Mingda Han
YXYaxiong Xie
Yaxiong Xie
GLGuohao Lan
Guohao Lan
WXWeitao Xu
Weitao Xu
Diverse Wi-Fi-based wireless applications have been proposed, ranging from daily activity recognition to vital sign monitoring. Despite their remarkable sensing accuracy, the high energy consumption and the requirement for customized hardware modification hinder the wide deployment of the existing sensing solutions. In this paper, we propose REHSense, an energy-efficient wireless sensing solution based on Radio-Frequency (RF) energy harvesting. Instead of relying on a power-hungry Wi-Fi receiver, REHSense leverages an RF energy harvester as the sensor and utilizes the voltage signals harvested from the ambient Wi-Fi signals to enable simultaneous context sensing and energy harvesting. We design and implement REHSense using a commercial-off-the-shelf (COTS) RF energy harvester. Extensive evaluation of three fine-grained wireless sensing tasks (i.e., respiration monitoring, human activity recognition, and hand gesture recognition) shows that REHSense can achieve comparable sensing accuracy with conventional Wi-Fi-based solutions while adapting to different sensing environments, reducing the power consumption of sensing by 98.7% and harvesting up to 4.5 mW of power from RF energy.