Cell-free systems can effectively eliminate the inter-cell interference by enabling multiple base stations (BSs) to cooperatively serve users without cell boundaries at the expense of high costs of hardware and power sources due to the large-scale deployment of BSs. To tackle this issue, the low-cost reconfigurable intelligent surface (RIS) can serve as a promising technique to improve the energy efficiency of cell-free systems. In this article, we consider an RIS aided cell-free MIMO system where multiple RISs are deployed around BSs and users to create favorable propagation conditions via reconfigurable reflections in a low-cost way, thereby enhancing cell-free MIMO communications. To maximize the energy efficiency, a hybrid beamforming (HBF) scheme consisting of the digital beamforming at BSs and the RIS-based analog beamforming is proposed. The energy efficiency maximization problem is formulated and an iterative algorithm is designed to solve this problem. The impact of the transmit power, the number of RIS, and the RIS size on energy efficiency are investigated. Both theoretical analysis and simulation results reveal that the optimal energy efficiency depends on the numbers of RISs and the RIS size. Numerical evaluations also show that the proposed system can achieve a higher energy efficiency than conventional ones.

Sleep monitoring is essential to people's health and wellbeing, which can also assist in the diagnosis and treatment of sleep disorder. Compared with contact-based solutions, contactless sleep monitoring does not attach any device to the human body; hence, it has attracted increasing attention in recent years. Inspired by the recent advances in Wi-Fi-based sensing, this article proposes a low-cost and nonintrusive sleep monitoring system using commodity Wi-Fi devices, namely, WiFi-Sleep. We leverage the fine-grained channel state information from multiple antennas and propose advanced fusion and signal processing methods to extract accurate respiration and body movement information. We introduce a deep learning method combined with clinical sleep medicine prior knowledge to achieve four-stage sleep monitoring with limited data sources (i.e., only respiration and body movement information). We benchmark the performance of WiFi-Sleep with polysomnography, the gold reference standard. Results show that WiFi-Sleep achieves an accuracy of 81.8%, which is comparable to the state-of-the-art sleep stage monitoring using expensive radar devices.

Mobile crowdsensing (MCS) is a new paradigm to collect sensing data and infer useful knowledge over a vast area for numerous monitoring applications. In urban environments, as more and more applications need to utilize multi-source sensing information, it is almost indispensable to develop a generic mechanism supporting multiple concurrent MCS task assignment. However, most existing multi-task assignment methods focus on homogeneous tasks. Due to the diverse spatiotemporal task requirements and sensing contexts, MCS tasks often differ from each other in many aspects (e.g., spatial coverage, temporal interval). To this end, in the paper, we present and formalize an important Heterogeneous Multi-Task Assignment (HMTA) problem in mobile crowdsensing systems, and try to maximize data quality and minimize total incentive budget. By leveraging the implicit spatiotemporal correlations among heterogeneous tasks, we propose a two-stage HMTA problem-solving approach to effectively handle multiple concurrent tasks in a shared resource pool. Finally, in order to improve the assignment search efficiency, a decomposition-and-combination framework is devised to accommodate large-scale problem scenario. We evaluate our approach extensively using two large-scale real-world data sets. The experimental results validate the effectiveness and efficiency of our proposed approach.

WiFi-based device-free motion tracking systems track persons without requiring them to carry any device. Existing work has explored signal parameters such as time-of-flight (ToF), angle-of-arrival (AoA), and Doppler-frequency-shift (DFS) extracted from WiFi channel state information (CSI) to locate and track people in a room. However, they are not robust due to unreliable estimation of signal parameters. ToF and AoA estimations are not accurate for current standards-compliant WiFi devices that typically have only two antennas and limited channel bandwidth. On the other hand, DFS can be extracted relatively easily on current devices but is susceptible to the high noise level and random phase offset in CSI measurement, which results in a speed-sign-ambiguity problem and renders ambiguous walking speeds. This paper proposes WiTraj, a device-free indoor motion tracking system using commodity WiFi devices. WiTraj improves tracking robustness from three aspects: 1) It significantly improves DFS estimation quality by using the ratio of the CSI from two antennas of each receiver, 2) To better track human walking, it leverages multiple receivers placed at different viewing angles to capture human walking and then intelligently combines the best views to achieve a robust trajectory reconstruction, and, 3) It differentiates walking from in-place activities, which are typically interleaved in daily life, so that non-walking activities do not cause tracking errors. Experiments show that WiTraj can significantly improve tracking accuracy in typical environments compared to existing DFS-based systems. Evaluations across 9 participants and 3 different environments show that the median tracking error $<2.5\%$ for typical room-sized trajectories.

Task allocation is a major challenge in Mobile Crowd Sensing (MCS). While previous task allocation approaches follow either the opportunistic or participatory mode, this paper proposes to integrate these two complementary modes in a two-phased hybrid framework called HyTasker. In the offline phase, a group of workers (called opportunistic workers) are selected, and they complete MCS tasks during their daily routines (i.e., opportunistic mode). In the online phase, we assign another set of workers (called participatory workers) and require them to move specifically to perform tasks that are not completed by the opportunistic workers (i.e., participatory mode). Instead of considering these two phases separately, HyTasker jointly optimizes them with a total incentive budget constraint. In particular, when selecting opportunistic workers in the offline phase of HyTasker, we propose a novel algorithm that simultaneously considers the predicted task assignment for the participatory workers, in which the density and mobility of participatory workers are taken into account. Experiments on a real-world mobility dataset demonstrate that HyTasker outperforms other methods with more completed tasks under the same budget constraint.

Recent years have witnessed rapid development in the research area of WiFi sensing, which senses human activities in a contactless and non-intrusive manner. One major issue that hinders real-world deployment of these systems is position dependence, i.e., once the human target changes location and orientation, the sensing performance degrades significantly. Existing machine learning based methods aim to solve this problem by either generating high-dimensional features or transfer learning the environment knowledge. However, these methods require significant training effort and yet acquire limited improvement. In this paper, we start by understanding and analyzing the Doppler frequency shift in WiFi sensing. We then develop a WiFi frequency model to quantify the relationship between signal frequency and target position, motion direction and speed for human activities. Based on this theoretical model, we prove that the commonly-used movement speed and motion direction features are position dependent, and further identify movement fragments and relative motion direction changes as two position-independent features. Building upon the position-independent features, we design a suite of position-independent gestures and develop the gesture recognition system accordingly. Evaluation results show that under various conditions (i.e., different locations, orientations, environments, and persons), our system achieves more than 96% recognition accuracy without any training, significantly outperforming state-of-the-art machine learning based solutions.