1 August 2018 in International Journal of Refrigeration
7 December 2016 in IEEE Transactions on Applied Superconductivity
This paper presents recent advances in the application of binary-divided 1 V array, consisting of 8192 intrinsically shunted SNIS overdamped Josephson junctions (JJs), for the synthesis of stepwise waves with quantum accuracy. The maximum output voltage is ensured by opportunely driving the subsections of the SNIS array by means of three states bias-current setpoints to the Shapiro steps n = 0, ±1 or n = ±2, respectively. Reconfigurable digital modular electronics has been designed to bias individually each of the 13 subsections of the SNIS array. A two-stage closed cycle refrigerator equipped with LF and RF electrical lines is employed for cooling-down the SNIS array for temperatures ranging from 3.6 K to above 7 K. Stepwise sine waves with rms amplitude ranging from 1 to 2 V using the first (n = 1) and second (n = 2) Shapiro steps, different temperatures and bias-current setpoints have been synthesized up to the kHz range. The synthesized waves have been recorded and analyzed by a high-precision differential sampling system. We report the results of the first characterizations carried out with the new multibit current source and an improved version of the sample holder designed to optimize the heat dissipation of the SNIS array for operation in cryocooler setups.
1 January 2017 in Measurement
23 February 2021 in Superconductor Science and Technology
Temperature sensing and control are essential in experiments running in cryocooled systems, as with the case of liquid helium-free superconducting devices. A Josephson junction as on-chip temperature sensor operated in ac provides the highest sensitivity and minimal power loading to the cryogenic environment, thanks to the noise rejection of lock-in detection. To demonstrate the advantages of on-chip sensing, we tested it with a Josephson voltage standard array in cryocooler and compared with the conventional case of a sensor on the cold surface of the refrigerator, showing that the power dissipated within the chip may further increment the device temperature up to some tenths of kelvin. An ac Josephson junction sensor is proven to be capable of directly stabilizing the temperature of the superconductive circuit from fluctuations of dissipated power during operation. Reliability issues related to flux trapping are discussed and solutions are proposed suited to different applications. Overall, on-chip control with ac Josephson temperature sensing has the advantage of avoiding the complexities in minimization of cryogenic thermal links, virtually reducing to zero the contact resistance and keeping the operating temperature of the superconductor constant, independently of instantaneous operating power.
18 December 2014 in IEEE Transactions on Applied Superconductivity
Cryogen-free operation is essential to expand applications of superconductivity, is unavoidable in some special cases and, in perspective, provides a solution to the expected shortages of liquid helium. In electrical metrology applications, high-temperature operation to reduce the refrigerator size and complexity is not yet possible since arrays of Josephson junctions for voltage standard applications made with high-temperature superconductors are not presently available. The superconductor-normal metal-insulator-superconductor (SNIS) technology developed at INRIM uses low-temperature superconductors but allows operation at temperatures close to 6 K. Thus, it is interesting for the cryocooler operation of a programmable voltage standard. We report on measurements of SNIS devices cooled with a closed-cycle refrigerator and in liquid helium to test the electrical behavior and its dependence on specific fabrication parameters that can be used to optimize the temperature stability.
11 February 2016 in IEEE Transactions on Applied Superconductivity
We report on our recent and ongoing activities on helium-free operation with ac Josephson standards based on programmable superconductor-normal conductor-insulator-superconductor (SNIS) arrays. Liquid helium-free operation provides ease of use, which is a wider number of applications and users. Moreover, it allows to reduce cable loading, which is crucial to overcome frequency-related limitations to the accuracy. Thermalization problems not faced with helium cooling are still challenging, in particular with programmable standards. To identify the effect of He-free cooling on electrical behavior, we compared the array steps in cryocooler a liquid helium. Results show that SNIS arrays can be operated in cryocooler and are interesting for application to programmable voltage standard.