8 December 2015 in IEEE Transactions on Industrial Electronics
This paper presents a boost-multilevel inverter design with integrated battery energy storage system for standalone application. The inverter consists of modular switched-battery cells and a full-bridge. It is multifunctional and has two modes of operation: 1) the charging mode, which charges the battery bank and 2) the inverter mode, which supplies ac power to the load. This inverter topology requires significantly less power switches compared to conventional topology such as cascaded H-bridge multilevel inverter, leading to reduced size/cost and improved reliability. To selectively eliminate low-order harmonics and control the desired fundamental component, nonlinear system equations are represented in fitness function through the manipulation of modulation index and the genetic algorithm (GA) is employed to find the optimum switching angles. A seven-level inverter prototype is implemented and experimental results are provided to verify the feasibility of the proposed inverter design.
24 April 2018 in Physical Review A
In the quest to achieve scalable quantum information processing technologies, gradient-based optimal control algorithms (e.g., grape) are broadly used for implementing high-precision quantum gates, but their performance is often hindered by deterministic or random errors in the system model and the control electronics. In this paper, we show that grape can be taught to be more effective by jointly learning from the design model and the experimental data obtained from process tomography. The resulting data-driven gradient optimization algorithm (d-grape) can in principle correct all deterministic gate errors, with a mild efficiency loss. The d-grape algorithm may become more powerful with broadband controls that involve a large number of control parameters, while other algorithms usually slow down due to the increased size of the search space. These advantages are demonstrated by simulating the implementation of a two-qubit controlled-not gate.
3 June 2010 in International Journal of Control
This article considers iterative learning control (ILC) for linear systems with convex control input constraints. First, the constrained ILC problem is formulated in a novel successive projection framework. Then, based on this projection method, two algorithms are proposed to solve this constrained ILC problem. The results show that, when perfect tracking is possible, both algorithms can achieve perfect tracking. The two algorithms differ, however, in that one algorithm needs much less computation than the other. When perfect tracking is not possible, both algorithms can exhibit a form of practical convergence to a ‘best approximation’. The effect of weighting matrices on the performance of the algorithms is also discussed and finally, numerical simulations are given to demonstrate the effectiveness of the proposed methods.
25 January 2019 in IEEE Transactions on Industry Applications
This paper proposes a fast repetitive control (FRC) scheme with harmonic correction loops for the three-phase three-wire shunt active power filter (APF) applied in weak power grid. The FRC scheme consists of a repetitive control loop which is designed in the synchronous rotational frame (SRF) and a fractional delay (FD) filter for approximating the fractional delay caused by the fixed sampling rate. It can significantly improve the dynamic performance for the harmonic compensation. In weak grid situation, the grid frequency, voltage and then harmonic currents would vary rapidly with disturbances. A cumulative error cancellation loop is introduced into the FRC to improve the harmonic detection accuracy when grid frequency drifts. And the harmonic correction loops are proposed to correct the harmonic references with selected orders when they vary rapidly with the grid voltage. With such loops, the compensation precision of the shunt APF can be highly improved. Simulation and experiment results verified the effectiveness of the proposed scheme.
10 March 2015 in International Journal of Robust and Nonlinear Control
18 August 2017 in IEEE Transactions on Control Systems Technology
Iterative learning control (ILC) is a high-performance tracking control design method for systems operating in a repetitive manner. This paper proposes a novel design methodology that extends the recently developed point-to-point ILC framework to allow automatic via-point time allocation within a given point-to-point tracking task, leading to significant performance improvements, e.g., energy reduction. The problem is formulated into an optimization framework with via-point temporal constraints and a reference tracking requirement, for which a two-stage design approach is developed. This yields an algorithmic solution, which minimizes input energy based on norm optimal ILC and gradient minimization. The algorithm is further expanded to incorporate system constraints into the design, prior to experimental validation on a gantry robot test platform to confirm its feasibility in practical applications.