1 June 2006 in Surface and Coatings Technology
1 March 2009 in Applied Surface Science
1 March 2010 in Surface and Coatings Technology
1 February 2008 in Surface and Coatings Technology
1 January 2011 in Physics Procedia
The development of hardfacing coatings has become technologically significant in many industries A common approach is the production of metal matrix composites (MMC) layers. In this work NiCr-WC MMC hardfacing layers are deposited on C25 steel by means of laser cladding. Spheroidal fused tungsten carbides is used as reinforcement phase. Three different NiCr alloys with different Cr content were tested. Optimum conditions to obtain dense, uniform carbide distribution and hardness close to nominal values were defined. The effect of Cr content respect to the microstructure, susceptibility for cracking and the wear rate of the resulting coating will also be discussed.
1 January 2014 in Physics Procedia
MCrAlY alloys (where M stands for Ni,Co or both) are commonly used as overlay protective coatings in gas turbine engine components against high temperature oxidation and corrosion. The protective effect of these alloys is due to the formation of a continuous thermally stable oxide layer on the coating surface. In this work several types of MCrAlY alloys, differing in their elemental composition, have been deposited on austenitic stainless steel by means of laser cladding. The microstructure of the coatings have been characterized by SEM-EDSand XRD. As expected, elemental composition compatible with γNi/γ’ Ni3Al,γNi/β-NiAl or γCo/β-(Co,Ni)Al phases are observed in hypoeutectic or hypereutectic microstructures depending on the alloy composition. The high temperature oxidation behavior of the coatings was evaluated by air furnace oxidation tests at 1100°C for 200h. The oxidized surface of the samples was examined by SEM-EDS and the oxides present identified by theoretical stoichiometric calculations. Results indicate the formation of a uniform Al3O2protective oxide scale with NiO,CoO, Y2O3/YAlO3 and Cr2O3 oxide inclusions