AC cascaded system is one of the basic components of the power conversion system in the modern more-electric aircraft (MEA). However, the AC cascaded system suffers instability problem, i.e., even each sub-system is stable individually, the formed cascaded system may become unstable. Most of the existing stabilization methods are linear control method which based on small signal model and only can ensure small signal stability near the operation point in theory. Therefore, these existing linear stabilization methods may be ineffective to fix large-signal stability issues. In this paper, a large signal stability constraining dichotomy solution (SCDS) based model predictive control (MPC) is proposed to improve the stability of the AC cascaded system in the MEA by the Lyapunov criteria. This approach first theoretically presents how to add the system stability item to the MPC cost function in an analytic way instead of using the traditional "experience based" weight method. Besides, the SCDS-MPC itself is also an improvement to the existing finite control set model predictive control (FCS-MPC). It can realize constant switching frequency and achieve better steady state/dynamic current control performance. Finally, a 1.5 kW AC cascaded system is fabricated in the lab to verify the proposed SCDS-MPC method.
24 March 2017 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In this paper, the LCLC resonant converter with zero current switching (ZCS) and zero voltage switching (ZVS) is investigated for two-stage high-voltage (several kilovolts) high-frequency (several hundred kilohertzes) applications. The working principles of the LCLC resonant converter with ZCS and ZVS are explained and the equivalent circuit of each mode is established. In addition, based on the working principles, design equations are deduced. Simulations in PSIM and MATLAB support the analysis. An LCLC resonant converter with 40-V input, 4800-V output, 500-kHz switching frequency, 295-W output power, and 96.8% efficiency is presented and the experimental results validate the analysis.
18 June 2020 in IEEE Transactions on Power Electronics
This letter proposes a self-driven gate driver solely composed of passive components for synchronous rectification (SR). It utilizes the energy of the converter itself, automatically considers component tolerances and temperature variations of critical design parameters, and tunes the SRs on-time. Furthermore, no microcontroller, auxiliary power supply or current-sensing/voltage-sensing components is required. A great amount of cost is therefore saved. The proposed gate driver is preferable to be used to any resonant converters operating as DC transformers. This letter presents its practical implementation in an LLC resonant converter. Experiment results illustrate that the body diodes conduction and reverse recovery are eliminated.
1 June 2018 in IEEE Transactions on Industrial Electronics
This paper proposes an improved partially interleaved structure for high-voltage (several kV) high-frequency (several hundred kHz) multiple-output applications. The proposed transformer structure is compared with other typical structures with the leakage inductance, AC capacitance, AC resistance and the ratio of AC/DC resistance taken into consideration. The proposed structure features lower leakage inductance, smaller AC capacitance, lower AC resistance and lower ratio of AC-DC resistance, which is suitable for high-frequency high-efficiency applications. A planar transformer with the proposed structure was built and tested in an LCLC resonant converter, where the input voltage is 40 V, output is 4800 V, switching frequency 500 kHz and the efficiency is 96.8%, which validates the analysis.
12 June 2019 in IEEE Transactions on Power Electronics
Asymmetrical CLLC-type DC transformers (ACLLC-type DCTs) become more and more popular in the renewable energy system thanks to the bidirectional power transmission, high power-density, and low-cost sensorless open-loop control. Nevertheless, the resonant frequency is not constant due to variations of the operation power and temperature in practice, which may make DCT lose its required voltage conversion gain (VCG) and deteriorate the power transmission (PT) ability. This poses a challenge on the design of circuit parameters, especially when the open-loop scheme is usually recommended for the ACLLC-type DCT in the renewable energy system. Therefore, a semi-AI based simplified parameter design approach is put forward in this paper for ACLLC-type DCT. It replaces all unknow parameters with two intermediate parameters through certain manipulations, and then utilizes a very simple computer-assisted procedure to optimally design the parameters of the ACLLC-type DCT. In addition, a detailed design example with a special planar transformer is presented via the aid of Ansys Maxwell to achieve the desired resonant parameters of the ACLLC-type DCT. Finally, the proposed semi-AI based method is experimentally demonstrated in a real renewable energy system prototype.