Xin Liu

Xin Liu

Auto-generated profile, based on publicly available information

Xin Liu

National Engineering Research Center of Wide Band‐Gap Semiconductor Xidian University Xi'an China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 May 2018 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
XLXin Liu
Xin Liu
QZQian Zhang
Qian Zhang
WCWenhua Chen
Wenhua Chen
HFhaigang feng
haigang feng
LCLong Chen
Long Chen
ZFZhenghe Feng
Zhenghe Feng
In this paper, we propose a beam-oriented digital predistortion (BO-DPD) technique for power amplifiers (PAs) in hybrid beamforming massive multiple-input multiple-output (MIMO) transmitters, which can achieve linearization of the transmitted signal in the main beam direction and address the DPD implementation issue in the hybrid beamforming array. In massive MIMO hybrid beamforming transmitters, the conventional DPD to linearize each PA is impractical to implement for that the number of digital chains is less than the number of PAs; however, the BO-DPD can resolve this issue by constructing and linearizing the “virtual” main beam signal rather than single PAs. According to the beamforming weights for array elements, the feedback path combines all PA's outputs to estimate the main beam signal for DPD processing. In addition, an average estimation method is also presented to broaden the linearized angle range around the main beam direction. A $4 \times 16$ (four subarrays and 16 antennas in each subarray) uniform linear array (ULA) simulation along with a $1 \times 2$ ULA at 2.5 GHz and a $2 \times 2$ ULA at 3.5-GHz experimental tests was performed. The experimental results show that the proposed technique and linearization angle range broadening method achieve up to 15-dB adjacent channel power ratio improvement and 10° linearization angle range in the main beam direction.

28 January 2019 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
GLGuansheng Lv
Guansheng Lv
WCWenhua Chen
Wenhua Chen
XLXin Liu
Xin Liu
ZFZhenghe Feng
Zhenghe Feng
This letter implements a 3.5-/5.8-GHz dual-band power amplifier (PA) with hybrid operating modes for 5G mobile communication and vehicle network using a 0.25-μm gallium nitride (GaN)-HEMT process. For the 3.5-GHz band, the PA operates in the Doherty mode, and the performance is optimized for a high back-off efficiency and a large bandwidth. For the 5.8-GHz band, the PA operates in class-AB mode, and optimal saturation efficiency is used as the design goal. According to the measurement results, a saturated power of 41.8-42.6 dBm, a saturated drain efficiency (DE) of 56%-64%, and a 6-dB back-off DE of 42%-51% are achieved from 3.3 to 3.8 GHz, while the saturated power and DE at 5.8 GHz are 41 dBm and 55%, respectively. To our best knowledge, this is the first dual-band GaN monolithic microwave integrated circuit PA designed for hybrid operating modes.

22 October 2019 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
XLXin Liu
Xin Liu
WCWenhua Chen
Wenhua Chen
LCLong Chen
Long Chen
FGFadhel M. Ghannouchi
Fadhel M. Ghannouchi
ZFZhenghe Feng
Zhenghe Feng

28 April 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
XLXin Liu
Xin Liu
WCWenhua Chen
Wenhua Chen
JCJiaming Chu
Jiaming Chu
FGFadhel Ghannouchi
Fadhel Ghannouchi
ZFZhenghe Feng
Zhenghe Feng
In this paper, a novel multi-stream spatial digital predistortion (DPD) technique is proposed to model and linearize the fully-connected (FC) hybrid beamforming (HBF) transmitters. The proposed scheme solves the DPD implementation issue in the FC HBF array by estimating and linearizing the beam signals instead of the individual PAs. In FC HBF systems, significant intermodulation (IMD) between different transmit signals will be generated due to the analog beamforming and combining network upstream of the power amplifiers (PAs). The IMD beams will end up being radiated in different directions and some of them might fall in the linear beam directions. Therefore, multi-input DPD blocks using a practical multi-variable model are constructed for each RF chain to eliminate the complicated inner- and cross-channel IMDs of the beam signals. Simulations on a 4-stream 64-element FC HBF array and experimental tests on a 2-stream 4-element system are carried out to benchmark the proposed DPD technique against the conventional techniques. Better than 13 dB adjacent channel power ratio (ACPR) improvement and 12 dB normalized mean square error (NMSE) improvement have been achieved by the proposed DPD technique.

9 April 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
DWDehan Wang
Dehan Wang
WCWenhua Chen
Wenhua Chen
XLXin Liu
Xin Liu
XLXuan Li
Xuan Li
FGFadhel M. Ghannouchi
Fadhel M. Ghannouchi
ZFZhenghe Feng
Zhenghe Feng
In this article, a novel broadband millimeter-wave (mm-wave) front end (FE) based on the asymmetric switch network structure is proposed for multistandard fifth-generation (5G) applications. The asymmetric switch network consists of a bidirectional impedance transformation network and a T-type topology single-pole single-throw (SPST) switch. In the TX-mode, the bidirectional impedance transformation network serves as an output matching network to achieve a continuous-mode Class-F -1 power amplifier (PA) to expand the bandwidth. In the RX-mode, the OFF impedance of the PA can be transformed into a high-impedance region by the bidirectional impedance transformation network. Based on the proposed structure, a broadband mm-wave front end is implemented in the 0.13- μm SiGe BiCMOS process, which occupies 906 μm ×997 μm including pads. In the TX-mode, the -1-dB P sat bandwidth of the FE covers 21-44 GHz with the maximum output power of 18.1-19 dBm and the peak power added efficiency (PAE) of 20.2%-26.8%. In the RX-mode, the FE achieves an 84.6% and -3-dB small-signal gain fractional bandwidth from 20.2 to 49.8 GHz with 38-mW power consumption. It achieves a measured noise figure (NF) of 7.62-11.64 dB over the frequency range of 24-48 GHz. To the best of our knowledge, this is the first FE that covers all the present 5G mm-wave bands without reconfiguration.

17 February 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
WCWenhua Chen
Wenhua Chen
XLXin Liu
Xin Liu
JCJiaming Chu
Jiaming Chu
HWHuibo Wu
Huibo Wu
ZFZhenghe Feng
Zhenghe Feng
FGFadhel Ghannouchi
Fadhel Ghannouchi
In this paper, a low complexity moving average nested generalized memory polynomial model (MAN-GMP) is proposed for digital predistortion (DPD) of broadband power amplifiers (PAs). As the signal bandwidth increases drastically, the strong nonlinear distortions, especially those induced by the memory effect, are generated from the highly efficient PAs. To compensate for the strong memory effect, a moving average nested envelope memory polynomial (MAN-EMP) model is derived from an accuracy-enhanced GMP model, which offers reduced complexity while suffering from degraded modeling accuracy. The MAN-GMP model is further proposed to improve the modeling accuracy by connecting several memory branches of the MAN-EMP model in parallel. An iterative algorithm is designed to extract the model coefficients efficiently through only one or two iterations. Experimental measurements are carried out on two sub-7 GHz broadband GaN Doherty PAs with up to 200 MHz bandwidth OFDM signals to benchmark the proposed MAN-GMP model against the GMP, the parallel-LUT-MP-EMP (PLUME), the augmented complexity-reduced GMP (ACR-GMP), the generalized twin-nonlinear two-box (GTNTB), and the enhanced Wiener models. The experimental results show that the MAN-GMP model can effectively compensate for the nonlinear distortion of broadband PAs with significant complexity reduction.