14 July 2026 in SSRN Electronic Journal
High-temperature oxidation of Alloy 800HT in impure helium can affect structural integrity through grain-boundary-controlled subsurface degradation. This study compared oxidation behaviour at 800°C between a P600-ground surface, containing a deformation-induced ultrafine-grained layer (UFGL), and a deformation-free Oxide Polishing Suspension (OPS)-polished surface representing the bulk microstructure. Grinding accelerated chromia formation, yielding a thin, unprotective, continuous scale. However, the UFGL recrystallised during exposure, generating grain boundaries susceptible to preferential intergranular oxidation (PIO). Both surfaces converged to a long-term degradation mode governed by bulk grain-boundary character, with non-Σ3 boundaries promoting PIO while Σ3 boundaries largely arrested penetration. Bowed grain boundary morphologies were consistent with diffusion-induced grain boundary migration (DIGM) as a plausible PIO precursor, though Ni/Cr solute partitioning was not retained after prolonged homogenisation. These findings demonstrate that surface finish influences oxidation only transiently, whereas long-term environmental degradation, is dictated by the intrinsic grain‐boundary network, with important implications for crack‐initiation susceptibility under stress.