21 October 2024 in IEEE Transactions on Biomedical Circuits and Systems
This paper presents a reconfigurable bidirectional wireless power and data transceiver (RB-WPDT) integrated circuit (IC) for wearable biomedical applications. The proposed transceiver can be reconfigured as a differential class-D power amplifier or a full-wave rectifier depending on the mode signal to facilitate power transfer between devices. Additionally, the RBWPDT system supports full-duplex (FD) data transmission via a single inductive link, enabling real-time control and monitoring between devices. The proposed FD method utilizes frequency shift-keying pulse-width modulation (FSK-PWM) for downlink and load shift-keying (LSK) for uplink, achieving simultaneous bidirectional data transmission by ensuring that the FSK-PWM downlink and LSK uplink data channels operate independently with minimal interference. The measured downlink and uplink data rates are 250 kb/s and 67 kb/s, respectively. The measured overall DC-to-DC efficiency is 49%, while the power delivered to the load (PDL) is 120 mW at a 5 mm distance. The proposed chip is fabricated using a 180-nm BCD CMOS process.
18 November 2025 in IEEE Transactions on Industrial Informatics
Internet of Things (IoT) devices are increasingly deployed in radio frequency-challenging environments such as underground, underwater, and high electromagnetic interference scenarios. In smart agriculture, for instance, multiple distributed IoT controllers require wireless power supply in the form of load-independent constant voltage (CV), while a multiparameter IoT sensor needs to be capable of transmitting data across varying distances. To address these requirements, this article presents a novel magnetic induction-based wireless power and data transfer system. The proposed system adopts a domino structure to support multiple devices. A unified load-utilized technique is then employed to realize individual CV output and data transmission, while the newly proposed load-resonator interleaved strategy enables these two functions to operate simultaneously within the same system. Theoretical analysis is conducted, and validation is provided through experimental measurements using 5- to 8-stage configurations under both in electronic and ex situ (laboratory soil) conditions. Results demonstrate the delivery of 160 mW CV power to each of three IoT controllers, along with successful 6 kbps data transfer from the sensor to all devices simultaneously, whereas failures occur when the proposed strategy is not applied.