Solvent vapor-responsive Ti3C2Tx-based actuators with a gradient microstructure in their composite active layer are prepared. The actuation behavior is understood by wide angle scattering, density functional theory and molecular dynamics.
Lightweight and mechanically robust hybrid foams based on cellulose nanocrystals (CNC) and multi‐walled carbon nanotubes (MWCNT) with an anisotropic structure are prepared by directional ice‐templating. The anisotropic hybrid CNC‐MWCNT foams displayed a combination of highly anisotropic thermal conductivity and an orientation‐dependent electromagnetic interference (EMI) shielding with a maximum EMI shielding efficiency (EMI‐SE) of 41–48 dB between 8 and 12 GHz for the hybrid foam with 22 wt% MWCNT. The EMI‐SE is dominated by absorption (SEA) which is important for microwave absorber applications. Modelling of the low radial thermal conductivity highlighted the importance of phonon scattering at the heterogeneous CNC‐MWCNT interfaces while the axial thermal conductivity is dominated by the solid conduction along the aligned rod‐like particles. The lightweight CNC‐MWCNT foams combination of an anisotropic thermal conductivity and EMI shielding efficiency is unusual and can be useful for directional heat transport and EMI shielding.
Time-resolved small-angle X-ray scattering (SAXS) was used to probe the assembly of cellulose nanocrystals (CNC) and montmorillonite (MNT) over a wide concentration range in aqueous levitating droplets. Analysis of the SAXS curves of the one-component and mixed dispersions shows that co-assembly of rod-like CNC and MNT nanoplatelets is dominated by the interactions between the dispersed CNC particles and that MNT promotes gelation and assembly of CNC, which occurred at lower total volume fractions in the CNC:MNT than in the CNC-only dispersions. The CNC dispersions displayed a d ∝ ϕ−1/2 scaling and a low-q power-law exponent of 2.0–2.2 for volume fractions up to 35%, which indicates that liquid crystal assembly co-exists and competes with gelation.