Mohammed Ismail

Mohammed Ismail

Auto-generated profile, based on publicly available information

Mohammed Ismail

Wayne State University

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 August 2018 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
DKDima Kilani
Dima Kilani
BMBaker Mohammad
Baker Mohammad
Mohammad AlhawariMohammad Alhawari
Mohammad Alhawari
HSHani Saleh
Hani Saleh
MIMohammed Ismail
Mohammed Ismail
This paper presents an area- and power-efficient dual-output switched capacitor (DOSC) dc-dc buck converter for wearable biomedical devices. The DOSC converter has an input voltage range between 1.05 and 1.4 V and generates two simultaneous regulated output voltages of 1 and 0.55 V. The DOSC consists of two main blocks: a switched capacitor regulator and an adaptive time multiplexing (ATM) controller. The switched capacitor regulator generates a single regulated voltage using pulse frequency modulation based on a predetermined reference voltage. In addition, the ATM controller generates two simultaneous output voltages and eliminates the reverse current using pulse width modulation during the switching between the output voltages. Addressing the reverse current problem is important to reduce the output voltage droop and improve the performance. The proposed converter supports load currents of 10-350 μA and 1-10 μA at load voltages of 1 and 0.55 V, respectively. The DOSC circuit is fabricated in 65-nm CMOS, and it occupies an active area of 0.27 mm 2 . Measured results show that a peak efficiency of 78% is achieved at a load power of 300 μW.

2 May 2023 in IEEE Transactions on Intelligent Vehicles
Verified
Journal Article
Closed access
LSLeila Sharara
Leila Sharara
APAlexandros Politis
Alexandros Politis
HSHadi Syed
Hadi Syed
EKEmma Kronell
Emma Kronell
DDDustin Dunsmore
Dustin Dunsmore
MIMohammed Ismail
Mohammed Ismail
This research aims to design and implement a complete safety and comfort device that integrates a Driving Monitoring System (DMS) and a car Seat Electronic Control Unit (SECU). The DMS employs a combination of infrared sensors and a pre-trained Artificial Intelligence (AI) algorithm with advanced facial recognition capabilities. It aims to monitor and control the driver's distraction and drowsiness level during daytime and nighttime driving conditions by accurately detecting head pose and eye status. If the system detects the driver is drowsy or distracted from the road, a warning system will be activated by sending an electrical signal to the aforementioned car SECU. The designed SECU initiates a car seat vibration and triggers an audible signal to alert the driver of a dangerous situation by managing the seat movement process and protection features. It provides the basic drive and control of the seat motor drivers and position sensors. The most important consideration of this SECU is meeting the following requirements: real-time control of various motors, fast processing speed, low power, low heat dissipation, low quiescent current, and low Electromagnetic Interference (EMI). The two systems were integrated into a single compact device that includes a night vision camera mounted on the steering column to record data without obstructing the driver's view. The system has high precision at a maximum detection rate of 45 Frames Per Second (FPS) in real-time. Furthermore, the system is robust under actual driving conditions without being affected by the time of day, facial expressions, or eye occlusions.

1 December 2013
Verified
Conference Paper
Closed access
Mohammad AlhawariMohammad Alhawari
Mohammad Alhawari
BMBaker Mohammad
Baker Mohammad
HSHani Saleh
Hani Saleh
MIMohammed Ismail
Mohammed Ismail
Emerging technology in semiconductor devices and circuits has enabled ultra-low power systems in medical, structural (bridges), and hard to reach places which fueled the energy scavenging research and its interface circuitry. The energy can be harvested from ambient sources such as vibration, wireless, thermal and solar. To harvest the energy, special interface circuit needs to be designed for suitable energy conversion such as DC-DC converters, power management unit, and storage elements. In this paper, we present a survey about the state-of-the-art thermal energy harvesting systems focusing on the interface circuitry, and explaining the tradeoffs in human body-based harvesting applications.

12 July 2018 in IEEE Transactions on Biomedical Circuits and Systems
Verified
Journal Article
Closed access
TTTemesghen Tekeste
Temesghen Tekeste
HSHani Saleh
Hani Saleh
BMBaker Mohammad
Baker Mohammad
AKAhsan Khandoker
Ahsan Khandoker
HJHerbert Jelinek
Herbert Jelinek
MIMohammed Ismail
Mohammed Ismail
This paper presents an electrocardiogram (ECG) processor on chip for full ECG feature extraction and cardiac autonomic neuropathy (CAN) classification. Full ECG extraction is performed using absolute value curve length transform (A-CLT) for QRS peak detection and using low-pass differentiation for other ECG features such as QRS on , QRS off , P wave , and T wave . The proposed QRS detector attained a sensitivity of 99.37% and predictivity of 99.38%. The extracted QRS peak to QRS peak intervals (RR intervals) along with QT intervals enable CAN severity detection, which is a cardiac arrhythmia usually seen in diabetic patients leading to increased risk of sudden cardiac death. This paper presents the first hardware real-time implementation of CAN severity detector that is based on RR variability and QT variability analysis. RR variability metrics are based on mean RR interval and root mean square of standard differences of the RR intervals. The proposed architecture was implemented in 65-nm technology and consumed 75 nW only at 0.6 V, when operating at 250 Hz. Ultralow power dissipation of the system enables it to be integrated into wearable healthcare devices.

15 November 2023 in IEEE Open Journal of Circuits and Systems
Verified
Journal Article
Open access
HMHamza Al Maharmeh
Hamza Al Maharmeh
NSNabil J. Sarhan
Nabil J. Sarhan
MIMohammed Ismail
Mohammed Ismail
Mohammad AlhawariMohammad Alhawari
Mohammad Alhawari
The increasing demand for high performance and energy efficiency in Artificial Neural Networks (ANNs) accelerators has driven a wide range of application-specific integrated circuits (ASICs). Besides, the rapid deployment of low-power IoT devices requires highly efficient computing, which as a result urges the need to explore low-power hardware implementations in different domains. This paper proposes a spatially unrolled time-domain accelerator that uses an ultra-low-power digital-to-time converter (DTC) while occupying an active area of 0.201 mm. The proposed DTC is implemented using a Laddered, Inverter (LI) circuit, which consumes 3× less power than the conventional inverter-based DTC and provides reliable performance across different process corners, supply voltages, and temperature variations. Post-synthesis results in 65nm CMOS show that the proposed core achieves a superior energy efficiency of 116 TOPS/W, a throughput of 4 GOPS, and an area efficiency of 20 GOPS/mm. The proposed core improves energy efficiency by 2.4 -47× compared to prior time-domain accelerators.

14 October 2014 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
BMBaker Mohammad
Baker Mohammad
HSHani Saleh
Hani Saleh
MIMohammed Ismail
Mohammed Ismail
This paper comprises two new methodologies to improve yield and reduce system-on-a-chip power. The first methodology is based on faulty static random-access memory (SRAM) cells detections and cache resizing. The key advantage of this approach is that it enables the end user to control the system's parameters to be error tolerant. Furthermore, this technique enables aggressive voltage scaling which causes parametric (soft) failures in SRAM-based memory. As such, the proposed methodology can be utilized to exchange cache size for lower power or better yield. In the second methodology, data from faulty cells are treated as imposed noise. Depending on the application, this error percentage (imposed noise) can be mitigated through three options. First, ignore error if the percentage of the error is tolerable. Second, simple hardware filtration is needed. Finally, software-based filtration is required. The viability of this approach is that it allows aggressive voltage scaling below the traditional to be a 100% correct approach for SRAM supply, which results in substantial reduction of power, trading off quality for power. For both approaches, BIST is used as part of the powerup sequence to identify the faulty memory addresses per voltage level and compute the faulty cells percentage. Furthermore, the proposed methodologies help in improving reliability and counteracting long-term effects on memory cell stability and lifetime degradation caused by negative bias temperature instability.