18 March 2016 in Journal of Ocean Engineering and Marine Energy
A considerable body of research is currently being performed to quantify available tidal energy resources and to develop efficient devices with which to harness them. This work is naturally focussed on maximising power generation from the most promising sites, and a review of the literature suggests that the potential for smaller scale, local tidal power generation from shallow near-shore sites has not yet been investigated. If such generation is feasible, it could have the potential to provide sustainable electricity for coastal homes and communities as part of a distributed generation strategy, and would benefit from easier installation and maintenance, lower cabling and infrastructure requirements and reduced capital costs when compared with larger scale projects. This article reviews tidal barrages and lagoons, tidal turbines, oscillating hydrofoils and tidal kites to assess their suitability for smaller scale electricity generation in the shallower waters of coastal areas at the design stage. This is achieved by discussing the power density, scalability, durability, maintainability, economic potential and environmental impacts of each concept. The discussion suggests that tidal kites and range devices are not well suited toward small-scale shallow water applications due to depth and size requirements, respectively. Cross-flow turbines appear to be the most suitable technology, as they have high power densities and a maximum size that is not constrained by water depth. Oscillating hydrofoils would also be appropriate, provided comparable levels of efficiency can be achieved.
1 August 2012 in Renewable and Sustainable Energy Reviews
This paper highlights the future perspectives of sustainable tribology by examining the economic, environmental and social impact of three tribological case studies. One case study examines the sustainability and durability of micro-CHP systems looking the tribological phenomena generated within a scroll expander system. The scroll is the main part of a specific micro-CHP system and experiences wear and cavitation damage. The tribological optimization of the scroll expander improves the sustainability of the micro-CHP unit while it has a serious economic and environmental impact to the consumers and to the society in general. Another case study is focused on friction and wear performance of lifeboat launch slipways. The causes of high friction and wear during the RNLI's lifeboat launches along an inclined slipway are investigated with a view to reducing the environmental impact due to slipway panel wear and lubricant release into the marine environment. The project encompasses the sustainable design of slipway panels using design modifications based on tribological investigations to double their lifespan, while environmental and economic impact was significantly reduced by the use of biodegradable greases and water as lubricants. The final case study involves an investigation of recycled plastic materials to replace polyurethane used on skateboard wheels, scooters and similar applications. Polyurethane (PU) is difficult to recycle. With the dwindling resources and environmental problems facing the world today, recycling for both waste reduction and resource preservation has become an increasingly important aspect of sustainability. The tribological results showed that recycled polycarbonate plastic can effectively act as a substitute to polyurethane wheels. Moreover, sustainability considerations showing the environmental benefits of the use of recycled plastics over PU include reducing the CO2 footprint by 50% and the energy consumed by 60%, among other benefits. These case studies emphasise the importance of sustainable tribology in our epoch showing that increased sustainability performance can be achieved through tribology to a significant extent in many cases, providing stability to our world and more viable long term growth to our societies
24 February 2017 in Polymer Engineering & Science
In this work, the fracture toughness of rotationally molded polyethylene (PE) and polypropylene (PP) was measured using J integral methods at static loading rates and at room temperature. Two different commercially available rotational molding grades PE and PP were tested in this study which have been used in various rotationally molded products such as small leisure craft, water storage tanks, and so on. Scanning electron microscope (SEM), optical microscope, differential scanning calorimetry (DSC), solid‐state nuclear magnetic resonance (solid‐state NMR), and X‐ray scattering were used to investigate the microstructure, fracture surfaces, and compare toughness properties of these materials. In PE, higher molecular weight and broader molecular weight distribution, larger amorphous and crystal region thicknesses are found to be related to higher toughness values. High molecular weight favors higher number of entanglements that improve fracture energy and broader distribution increases long chain branching of higher molecular weight fractions which creates higher entanglements at the branch sites. Larger amorphous regions promote microvoiding more easily compared to thinner amorphous regions, leading to greater plastic deformation and energy absorption. Higher crystal thickness also contributes to microvoiding in the amorphous region. For PP, greater plastic deformation observed in the fracture surfaces is related to higher fracture toughness values. POLYM. ENG. SCI., 58:63–73, 2018. © 2017 Society of Plastics Engineers
7 May 2009 in Tribology International