1 September 2022 in IEEE Electron Device Letters
In this letter, wake-up free La-doped HfO2-ZrO2 (HZO) ferroelectrics are experimentally fabricated using an atomic layer-specific doping (ALSD) technique, which selectively introduces La dopants at effective locations to facilitate the formation of ferroelectric orthorhombic phase. With this technique, robust La-doped HZO ferroelectric devices that are mostly free from the undesired wake-up effect and anti-ferroelectricity were demonstrated over a large La doping range (from 2.9 to 11.5%). Moreover, large remanent polarization and good endurance were achieved at the same time (>107 cycles). The outstanding performances can be attributed to the effective stabilization of ferroelectric orthogonal phase and the suppression of tetragonal phase, through controlling of the dopants’ local environment. Thus, ALSD is an effective approach to achieve reliable, wake-up free and CMOS-compatible HZO-based ferroelectrics.
1 June 2022 in IEEE Electron Device Letters
A two-step oxygen vacancy (V O ) engineering technique is presented to enhance the ferroelectricity of Hf 0.5 Zr 0.5 O 2 (HZO) film with superior dielectric reliability. The V O engineering consists of two steps: 1) V O formation in the HZO film to stabilize the orthorhombic phase and 2) V O passivation to annihilate the V O -related defects without degrading the ferroelectric properties. In addition, we further investigate the feasibility of the two-step V O engineering at a low thermal budget process (400 °C) for back-end-of-line (BEOL) applications. Superior remnant polarization (2P $_{\text {r}} = 43\,\,\mu \text{C}$ /cm 2 ) and high endurance of $> 10^{{8}}$ cycles are demonstrated in HZO thin films processed at 400 °C, which are comparable to those processed at high temperatures.
29 November 2021 in Applied Physics Express
We propose an oxygen scavenging technique based on thermodynamic considerations of metal and oxygen systems to stabilize the ferroelectric phase and enhance the ferroelectricity in Hf-based oxides. By using an oxygen scavenging metal to control the oxygen vacancy concentration in Hf-based oxides, the effect of this oxygen scavenging technique in ferroelectric Hf-based oxides was systematically investigated. It was revealed that controlling the oxygen vacancies during the crystallization process is of vital importance to stabilizing the ferroelectric properties. This oxygen scavenging technique is an effective method of improving the performance of Hf-based ferroelectric materials without employing any dopant in Hf-based oxides.
22 September 2023 in IEEE Electron Device Letters
This study investigated the effect of the bottom electrodes on the ferroelectricity of La-doped HfO 2 (HLO) capacitors. The remanent polarization (2P r ) of HLO capacitors with different bottom electrodes, including heavily doped p-type single crystal Ge and Si substrates, TiN, and polycrystalline Ge (poly-Ge), varies significantly. The TiN/HLO/Ge capacitors demonstrate superior ferroelectric performance owing to the absence of a dielectric interfacial layer and the single crystallinity of Ge substrates. Furthermore, improving the crystallinity of bottom electrodes can result in a considerable enhancement in remanent polarization. The pre-annealing process carried out on poly-Ge electrode is found to be effective in stabilizing the orthorhombic phase and enhancing the ferroelectricity of HLO capacitors, with 2P r values increasing from 14.8 μC/cm 2 to 27.5 μC/cm 2 . Similar results are observed in capacitors with annealed TiN as bottom electrodes. It is irrefutable that the ferroelectricity of HLO capacitors strongly depends on the crystallinity of the bottom electrode. This discovery offers a solid explanation and experimental evidence for the effect of the bottom electrodes on ferroelectric devices and provides novel insights for optimizing ferroelectric properties.
30 August 2023 in IEEE Transactions on Electron Devices
This work presents the first demonstration of an embedded 0.5-Flash-0.5-RRAM (0.5F0.5R) hybrid memory on Ge, which can be efficiently integrated with advanced Ge logic devices. We explore yttrium (Y)-doped GeO $_{\textit{x}}$ (YGO) with a range of Y-doping concentrations in GeO $_{\textit{x}}$ and achieve stable multibit Flash and high mobility logic devices for embedded nonvolatile memories technology by exploiting the superior interface properties of low YGO and the charge-trapping behaviors of high YGO. The Flash and logic devices exhibit the peak electron mobility of 1168 cm $^{\text{2}}$ /Vs (equivalent oxide thickness (EOT) $=$ 18 nm) and 684 cm $^{\text{2}}$ /Vs (EOT $=$ 0.8 nm), respectively. By combining a Ge-based resistive memory, the 0.5F0.5R hybrid memory can provide more than 7 b/cell by distributing bits across different physical elements. Furthermore, the negligible disturbance between the two different memories in the 0.5F0.5R structure offers a promising solution for high-density nonvolatile memory applications.