This study investigates advanced catalyst coated membranes (CCMs) for polymer electrolyte membrane fuel cells (PEMFCs) operating at low relative humidity (RH) with reduced Pt loading. Reactive spray deposition technology (RSDT) is employed to fabricate anode and cathode catalyst layers (CLs) with Pt loadings of 0.05 ± 0.01 and 0.12 ± 0.02 mg cm−2, respectively. The cathode CL features gradients in Pt loading, while a short-side chain ionomer and thinner membranes are exploited to improve performance. The impact of ionomer-to-carbon ratio, ionomer type, CL design, and membrane thickness and composition are investigated.Optimized CCMs exhibit improved low-RH performance. It is found that: (i) cathode CL with higher Pt loading near the membrane mitigates H+ transport loss by promoting the ORR in regions of higher proton conductivity; (ii) thinner membranes improve water flux from cathode to anode, mitigating dehydration and enhancing ionic conductivity; and (iii) the SSC ionomer improves oxygen transport, reduces charge transfer resistance, and enhances proton conductivity. The optimized CCM achieves higher current per gram of Pt than a commercial CCM, demonstrating improved catalyst utilization. However, reduced platinum loading still affects low-RH performance due to increased mass transport resistance at low roughness factor.