4 July 2007 in Nano Letters
30 April 2008 in Physical Review B
We present here comparative measurements by scanning electron microscopy (SEM) and field emission (FE) of the mechanical resonances of singly clamped, batch-fabricated SiC nanowires as well as an extensive theoretical description. The mechanical resonances of six nanowires, which were glued to the ends of tungsten support tips, were electrostatically excited and detected visually in the SEM configuration and then by FE microscopy image processing. The large tensions generated by electric field pulling in FE that tune the resonance frequencies and the complex boundary conditions at both the free and clamped nanowire ends complicate the interpretation of the resonance frequencies necessary for extracting intrinsic mechanical parameters. Our model fully takes into account these effects and results in an excellent agreement with the measured resonance modes in both configurations. Analytical solutions with their validity conditions are given for the low and high tension ranges and semianalytical solutions for the intermediary range. Viable estimates of Young’s modulus are thus achieved for the ultra high vacuum (UHV) environment of FE. Progressive in situ cleaning was performed in the FE-UHV configuration in the range of , which increased the factor of the first mechanical resonance by up to and did not alter the value of the Young’s modulus measured previously in the SEM configuration. The agreement between the SEM and FE techniques means that we can now profit from their different strengths for better understanding the mechanics of nanowires and nanotubes.
22 January 2007 in Applied Physics Letters
The authors present here the measurements of high mechanical factors for singly clamped, batch-fabricated SiC nanowires measured by field emission (FE) in ultrahigh vacuum. The resonances of two nanowires, glued to the ends of tungsten support tips, were electrostatically excited and detected by the variation in the FE microscopy (FEM) images. Low amplitude oscillations were measured by numerical analysis of the FEM image blurring during frequency scans through the resonances. This avoided the artificial broadening of the resonances by nonlinear effects. A room temperature factor of 159 000 was achieved after high temperature in situ cleaning.
1 April 2011 in Journal of Applied Physics
In this paper we examine carrier transport mechanisms in individual Silicon Carbide nanowires (NWs) by an original use of field emission (FE). Total energy distributions were measured as a function of temperature and extraction voltage allowing us to determine the voltage drops along the NWs and thus the temperature-dependent current-voltage characteristics. The measurements were analyzed using different transport mechanisms of which only the Poole–Frenkel model gives an excellent fit. The dielectric constant was estimated for several samples at in excellent agreement with the bulk value. The characteristic trap energies, , were determined from the data to be ∼0.3 eV. In general this work shows how FE can be used for transport measurements on individual semiconducting NWs.
26 March 2014 in Physical Review Letters
Field emission experiments on modified carbon nanotube tips show that Coulomb blockade phenomena, increased resistance at small bias voltages, persist at unexpectedly high temperatures and low currents.