30 July 2022 in Energy & Environmental Science
We have developed a high-performance deep transfer learning framework to predict the health status of lithium-ion batteries for each end-user at any charge–discharge cycle.
4 February 2020 in IEEE/ASME Transactions on Mechatronics
In industrial applications, nearly half the failures of motors are caused by the degradation of rolling element bearings (REBs). Therefore, accurately estimating the remaining useful life (RUL) for REBs is of crucial importance to ensure the reliability and safety of mechanical systems. To tackle this challenge, model-based approaches are limited by the complexity of mathematical modeling. Conventional data-driven approaches, on the other hand, require massive efforts to extract the degradation features and construct the health index. In this paper, a novel data-driven framework is proposed to exploit the adoption of deep convolutional neural networks (CNN) in predicting the RULs of bearings. More concretely, raw vibrations of training bearings are first processed using the Hilbert-Huang transform to construct a novel nonlinear degradation energy indicator which can be used as the training label. The CNN is then employed to identify the hidden pattern between the extracted degradation energy indicator and the raw vibrations of training bearings, which makes it possible to estimate the degradation of the test bearings automatically. Finally, testing bearings' RULs are predicted through using a ϵ-support vector regression model. The superior performance of the proposed RUL estimation framework, compared with the state-of-the-art approaches, is demonstrated through the experimental results. The generality of the proposed CNN model is also validated by performance test on other bearings undergoing different operating conditions.
16 February 2023 in Neurocomputing
3 June 2022 in IEEE Transactions on Neural Networks and Learning Systems
State of health (SOH) estimation of lithium-ion batteries (LIBs) is of critical importance for battery management systems (BMSs) of electronic devices. An accurate SOH estimation is still a challenging problem limited by diverse usage conditions between training and testing LIBs. To tackle this problem, this article proposes a transfer learning-based method for personalized SOH estimation of a new battery. More specifically, a convolutional neural network (CNN) combined with an improved domain adaptation method is used to construct an SOH estimation model, where the CNN is used to automatically extract features from raw charging voltage trajectories, while the domain adaptation method named maximum mean discrepancy (MMD) is adopted to reduce the distribution difference between training and testing battery data. This article extends MMD from classification tasks to regression tasks, which can therefore be used for SOH estimation. Three different datasets with different charging policies, discharging policies, and ambient temperatures are used to validate the effectiveness and generalizability of the proposed method. The superiority of the proposed SOH estimation method is demonstrated through the comparison with direct model training using state-of-the-art machine learning methods and several other domain adaptation approaches. The results show that the proposed transfer learning-based method has wide generalizability as well as a positive precision improvement.
7 April 2020 in IEEE Access
For the fault diagnosis problems of rotating machinery in the real industrial practice, measurement data with imbalanced class distributions negatively affect the diagnostic performance of most conventional machine learning classification algorithms since equal cost weights are assigned to different fault classes. Meanwhile, the widely used traditional data generation methods for the imbalanced data problem are limited by data dependencies over time continuity. To fill this research gap, this paper develops a new diagnostic framework based on the adversarial neural networks (GAN) and multi-sensor data fusion technique to generate new synthetic data for data compensation purpose. Two different practice modes are designed based on this framework according to the position logic of the data fusion, namely a Pre-fusion GAN mode and a Post-fusion GAN mode. More concretely, without data pre-processing, the designed generator generates synthetic data to puzzle the discriminator and the synthetic data that out-trick the discriminator can be used to compensate the minor class. To avoid data dependency and to ensure the generality of the proposed framework, the network modelling are trained with a more practical approach where the training and test data are obtained under different rotating speeds. Two imbalanced data sets on the rotating machinery, one benchmark public rolling bearing data set and another gear box data set acquired in our lab, are used to validate the proposed method. The performance is examined through a wide range of data imbalanced ratios (as high as 30:1), and compared with other state-of-the-art methods. The experiment results conclude that the proposed Pre-fusion GAN and Post-fusion GAN frameworks both have good performance on the imbalanced fault diagnosis of rotating machinery.
8 April 2025 in IEEE Transactions on Industrial Informatics
Accurate prediction of material removal depth and averaged surface roughness is crucial for evaluating the performance of robotic belt grinding (RBG). Nevertheless, the machining parameters of RBG across different spaces exhibit various data distributions, which often results in prediction shifts on unseen machining parameters when using conventional approaches. In this article, we introduce a pairwise domain adaptation-assisted dual-task learning (PW-DA-DTL) method for copredicting material removal depth and averaged surface roughness with regard to new RBG machining parameter spaces. The multigate mixture-of-experts method is employed as the foundational framework for dual-task learning, effectively capturing and modeling the relationships between material removal depth and average surface roughness by leveraging their inherent task interdependencies. The pairwise domain adaptation strategy is put forward to simultaneously enhance sample diversity and mitigate cross-domain data distribution discrepancy between the existing and new RBG machining parameter spaces. Comparative experiments are presented to demonstrate the effectiveness and superiority of the proposed PW-DA-DTL method.