Gabriel Cadilha Marques

Gabriel Cadilha Marques

Auto-generated profile, based on publicly available information

Gabriel Cadilha Marques

Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 February 2023 in Nature Communications
Verified
Journal Article
Open access
PDF file
LYLiang Yang
Liang Yang
HHHongrong Hu
Hongrong Hu
ASAlexander Scholz
Alexander Scholz
FFFlorian Feist
Florian Feist
GMGabriel Cadilha Marques
Gabriel Cadilha Marques
MWMartin Wegener
Martin Wegener
Printed organic and inorganic electronics continue to be of large interest for sensors, bioelectronics, and security applications. Many printing techniques have been investigated, albeit often with typical minimum feature sizes in the tens of micrometer range and requiring post-processing procedures at elevated temperatures to enhance the performance of functional materials. Herein, we introduce laser printing with three different inks, for the semiconductor ZnO and the metals Pt and Ag, as a facile process for fabricating printed functional electronic devices with minimum feature sizes below 1 µm. The ZnO printing is based on laser-induced hydrothermal synthesis. Importantly, no sintering of any sort needs to be performed after laser printing for any of the three materials. To demonstrate the versatility of our approach, we show functional diodes, memristors, and a physically unclonable function based on a 6 × 6 memristor crossbar architecture. In addition, we realize functional transistors by combining laser printing and inkjet printing.

4 September 2017 in Applied Physics Letters
Verified
Journal Article
Closed access
GMGabriel Cadilha Marques
Gabriel Cadilha Marques
SGSuresh Kumar Garlapati
Suresh Kumar Garlapati
SDSimone Dehm
Simone Dehm
SDSubho Dasgupta
Subho Dasgupta
HHHorst Hahn
Horst Hahn
JAJasmin Aghassi-Hagmann
Jasmin Aghassi-Hagmann
Printed electronic components offer certain technological advantages over their silicon based counterparts, like mechanical flexibility, low process temperatures, maskless and additive manufacturing possibilities. However, to be compatible to the fields of smart sensors, Internet of Things, and wearables, it is essential that devices operate at small supply voltages. In printed electronics, mostly silicon dioxide or organic dielectrics with low dielectric constants have been used as gate isolators, which in turn have resulted in high power transistors operable only at tens of volts. Here, we present inkjet printed circuits which are able to operate at supply voltages as low as ≤2 V. Our transistor technology is based on lithographically patterned drive electrodes, the dimensions of which are carefully kept well within the printing resolutions; the oxide semiconductor, the electrolytic insulator and the top-gate electrodes have been inkjet printed. Our inverters show a gain of ∼4 and 2.3 ms propagation delay time at 1 V supply voltage. Subsequently built 3-stage ring oscillators start to oscillate at a supply voltage of only 0.6 V with a frequency of ∼255 Hz and can reach frequencies up to ∼350 Hz at 2 V supply voltage. Furthermore, we have introduced a systematic methodology for characterizing ring oscillators in the printed electronics domain, which has been largely missing. Benefiting from this procedure, we are now able to predict the switching capacitance and driver capability at each stage, as well as the power consumption of our inkjet printed ring oscillators. These achievements will be essential for analyzing the performance and power characteristics of future inkjet printed digital circuits.

20 March 2019 in Advanced Materials
Verified
Journal Article
Open access
PDF file
GMGabriel Cadilha Marques
Gabriel Cadilha Marques
DWDennis Weller
Dennis Weller
AEAhmet Turan Erozan
Ahmet Turan Erozan
XFXiaowei Feng
Xiaowei Feng
MTMehdi Tahoori
Mehdi Tahoori
JAJasmin Aghassi-Hagmann
Jasmin Aghassi-Hagmann
Printed electrolyte‐gated oxide electronics is an emerging electronic technology in the low voltage regime (≤1 V). Whereas in the past mainly dielectrics have been used for gating the transistors, many recent approaches employ the advantages of solution processable, solid polymer electrolytes, or ion gels that provide high gate capacitances produced by a Helmholtz double layer, allowing for low‐voltage operation. Herein, with special focus on work performed at KIT recent advances in building electronic circuits based on indium oxide, n‐type electrolyte‐gated field‐effect transistors (EGFETs) are reviewed. When integrated into ring oscillator circuits a digital performance ranging from 250 Hz at 1 V up to 1 kHz is achieved. Sequential circuits such as memory cells are also demonstrated. More complex circuits are feasible but remain challenging also because of the high variability of the printed devices. However, the device inherent variability can be even exploited in security circuits such as physically unclonable functions (PUFs), which output a reliable and unique, device specific, digital response signal. As an overall advantage of the technology all the presented circuits can operate at very low supply voltages (0.6 V), which is crucial for low‐power printed electronics applications.

11 November 2016 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
GMGabriel Cadilha Marques
Gabriel Cadilha Marques
SGSuresh Kumar Garlapati
Suresh Kumar Garlapati
DCDebaditya Chatterjee
Debaditya Chatterjee
SDSimone Dehm
Simone Dehm
SDSubho Dasgupta
Subho Dasgupta
MTMehdi B. Tahoori
Mehdi B. Tahoori
High mobility, electrolyte-gated FETs (EGFETs), based on precursor-derived oxide semiconductors, enable the possibility of achieving printed and low voltage (<;2 V) operated circuits. These EGFETs can also be realized with displaced-gate geometries. However, the displaced-gate devices are typically slow due to high electrolyte resistance resulting from the large gate-channel distances. Here, we show that a thin insulating (composite solid polymer electrolyte) layer and a top-gate geometry can largely overcome this limitation, a comprehensive comparison between the displaced-gate and the top-gate devices has been provided. In order to facilitate circuit design, we have successfully developed accurate models to predict the behavior of these top-gate EGFETs. The importance of our modeling approach is further enhanced by the fact that appropriate predictive modeling strategies for printed circuits, especially for those that are based on oxide semiconductors, are largely missing. Unlike existing transistor models that do not cover all voltage regimes (below, near, and above threshold), we propose a new modeling methodology that matches very well with the measured data, is continuous and smooth over the entire voltage range, and can be easily incorporated into SPICE simulators.

2 April 2019 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
GMGabriel Cadilha Marques
Gabriel Cadilha Marques
FSFalk von Seggern
Falk von Seggern
SDSimone Dehm
Simone Dehm
BBBen Breitung
Ben Breitung
HHHorst Hahn
Horst Hahn
JAJasmin Aghassi-Hagmann
Jasmin Aghassi-Hagmann
In the domain of printed electronics (PE), field-effect transistors (FETs) with an oxide semiconductor channel are very promising. In particular, the use of high gate-capacitance of the composite solid polymer electrolytes (CSPEs) as a gate-insulator ensures extremely low voltage requirements. Besides high gate capacitance, such CSPEs are proven to be easily printable, stable in air over wide temperature ranges, and possess high ion conductivity. These CSPEs can be sensitive to moisture, especially for high surface-to-volume ratio printed thin films. In this paper, we provide a comprehensive experimental study on the effect of humidity on CSPE-gated single transistors. At the circuit level, the performance of ring oscillators (ROs) has been compared for various humidity conditions. The experimental results of the electrolyte-gated FETs (EGFETs) demonstrate rather comparable currents between 30%-90% humidity levels. However, the shifted transistor parameters lead to a significant performance change of the RO frequency behavior. The study in this paper shows the need of an impermeable encapsulation for the CSPE-gated FETs to ensure identical performance at all humidity conditions.

4 January 2018 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
FRFarhan Rasheed
Farhan Rasheed
MGMohammad Saber Golanbari
Mohammad Saber Golanbari
GMGabriel Cadilha Marques
Gabriel Cadilha Marques
MTMehdi B. Tahoori
Mehdi B. Tahoori
JAJasmin Aghassi-Hagmann
Jasmin Aghassi-Hagmann
A printed electronics technology has the advantage of additive and extremely low-cost fabrication compared with the conventional silicon technology. Specifically, printed electrolyte-gated field-effect transistors (EGFETs) are attractive for low-cost applications in the Internet-of-Things domain as they can operate at low supply voltages. In this paper, we propose an empirical dc model for EGFETs, which can describe the behavior of the EGFETs smoothly and accurately over all regimes. The proposed model, built by extending the Enz-Krummenacher-Vittoz model, can also be used to model process variations, which was not possible previously due to fixed parameters for near threshold regime. It offers a single model for all the operating regions of the transistors with only one equation for the drain current. Additionally, it models the transistors with a less number of parameters but higher accuracy compared with existing techniques. Measurement results from several fabricated EGFETs confirm that the proposed model can predict the I-V more accurately compared with the state-of-the-art models in all operating regions. Additionally, the measurements on the frequency of a fabricated ring oscillator are only 4.7% different from the simulation results based on the proposed model using values for the switching capacitances extracted from measurement data, which shows more than 2× improvement compared with the state-of-the-art model.