Printed organic and inorganic electronics continue to be of large interest for sensors, bioelectronics, and security applications. Many printing techniques have been investigated, albeit often with typical minimum feature sizes in the tens of micrometer range and requiring post-processing procedures at elevated temperatures to enhance the performance of functional materials. Herein, we introduce laser printing with three different inks, for the semiconductor ZnO and the metals Pt and Ag, as a facile process for fabricating printed functional electronic devices with minimum feature sizes below 1 µm. The ZnO printing is based on laser-induced hydrothermal synthesis. Importantly, no sintering of any sort needs to be performed after laser printing for any of the three materials. To demonstrate the versatility of our approach, we show functional diodes, memristors, and a physically unclonable function based on a 6 × 6 memristor crossbar architecture. In addition, we realize functional transistors by combining laser printing and inkjet printing.

Printed electronics including large‐area sensing, wearables, and bioelectronic systems are often limited to simple circuits and hence it remains a major challenge to efficiently store data and perform computational tasks. Memristors can be considered as ideal candidates for both purposes. Herein, an inkjet‐printed memristor is demonstrated, which can serve as a digital information storage device, or as an artificial synapse for neuromorphic circuits. This is achieved by suitable manipulation of the ion species in the active layer of the device. For digital‐type memristor operation resistive switching is dominated by cation movement after an initial electroforming step. It allows the device to be utilized as non‐volatile digital memristor, which offers high endurance over 12 672 switching cycles and high uniformity at low operating voltages. To use the device as an electroforming‐free, interface‐based, analog‐type memristor, anion migration is exploited which leads to volatile resistive switching. An important figure of merits such as short‐term plasticity with close to biological synapse timescales is demonstrated, for facilitation (10–177 ms), augmentation (10s), and potentiation (35 s). Furthermore, the device is thoroughly studied regarding its metaplasticity for memory formation. Last but not least, the inkjet‐printed artificial synapse shows non‐linear signal integration and low‐frequency filtering capabilities, which renders it a good candidate for neuromorphic computing architectures, such as reservoir computing.

Memristors are an interesting novel class of devices for memory and beyond von Neumann computing. Besides classical CMOS technology, memristors can also be manufactured by additive printing techniques and hold great potential for printable neuromorphic circuits and memories. In this work, we report a fully inkjet-printed unipolar metal oxide memristor with a low forming voltage. The memristor is based on a sandwich-like Ag/ZnO/Ag structure. The device exhibits excellent performance parameters, such as high cycle-to-cycle and device-to-device uniformity and a long retention time of ${\geq } {10}^{{4}}$ s. Furthermore, the inkjet-printed memristor shows an exceptionally high $R_{\mathrm{OFF}} / R_{\mathrm{ON}}$ ratio of ${10}^{{7}}$ over 100 pulsed switching cycles.

In this Letter, we report an inkjet-printed resistive switching device based on an Ag/ZnO/Au structure. The device exhibits bipolar resistive switching behavior, a low operation voltage of about 0.7 V, a high on/off ratio of 10⁷, a long retention time exceeding 10⁴ s, and good endurance. The conduction mechanism of the device in low and high resistive states was studied and showed good consistency with the theory of Ohmic and space charge limited conduction mechanisms, respectively.

A physical unclonable function (PUF) is a hardware circuit that produces a random sequence based on its manufacturing-induced intrinsic characteristics. In the past decade, silicon-based PUFs have been extensively studied as a security primitive for identification and authentication. The emerging field of printed electronics (PE) enables novel application fields in the scope of the Internet of Things (IoT) and smart sensors. In this paper, we design and evaluate a printed differential circuit PUF (DiffC-PUF). The simulation data are verified by Monte Carlo analysis. Our design is highly scalable while consisting of a low number of printed transistors. Furthermore, we investigate the best operating point by varying the PUF challenge configuration and analyzing the PUF security metrics in order to achieve high robustness. At the best operating point, the results show areliability of 98.37% and a uniqueness of 50.02%, respectively. This analysis also provides useful and comprehensive insights into the design of hybrid or fully printed PUF circuits. In addition, the proposed printed DiffC-PUF core has been fabricated with electrolyte-gated field-effect transistor technology to verify our design in hardware.

Hybrid systems, unifying printed electronics with silicon‐based technology, can be seen as a driving force for future sensor development. Especially interesting are sensing elements based on printed devices in combination with silicon‐based high‐performance electronics for data acquisition and communication. In this work, a hybrid system integrating a solution‐processed organic photodiode in a silicon‐based system environment, which enables flexible device measurement and application‐driven development, is presented. For performance evaluation of the integrated organic photodiode, the measurements are compared to a silicon‐based counterpart. Therefore, the steady state response of the hybrid system is presented. Promising application scenarios are described, where a solution‐processed organic photodiode is fully integrated in a silicon system.