1 January 2019 in Food and Bioproducts Processing
1 September 2021 in Food and Bioproducts Processing
8 September 2021 in Heat Transfer Engineering
The removal of film-like deposits is a challenge in many fields of production. For environmental and economic reasons, the cleaning processes need to be optimized. An optimization by means of computational fluid dynamics seems to be beneficial, but is subject to some restrictions, especially in industrial context. General modeling ideas, a subdivision into sub-processes and the significance of time dependent soil behavior are discussed as well as specific concepts related to four basic cleaning mechanisms, namely diffusive dissolution, cohesive separation, viscous shifting and adhesive detachment. Cleaning experiments in fully developed plane channel flow, resembling a simplified plate heat exchanger, are performed with model soils (starch, petroleum jelly, ketchup) which were chosen to represent an almost ideal form of one of the basic cleaning mechanisms.
26 February 2014 in Chemie Ingenieur Technik
28 June 2023 in Heat and Mass Transfer
Predicting the cleaning time required to remove a thin layer of soil is a challenging task and subject of current research. One approach to tackle this problem is the decomposition into physical sub-problems which are modelled separately and the subsequent synthesis of these models. In this paper, an existing model for adhesive detachment is extended for the prediction of the cleaning time of cohesively separating soil layers. The extension is based on measurements of the pull-off forces and their correlation to the local water mass fraction. The resulting new model is validated using cleaning experiments with starch in a fully developed channel flow. Furthermore, an inhomogeneous soil distribution and its effect on cleaning results like cleaning time and removal rate is investigated. It is shown that accounting for the local soil distribution in the model leads to a significant improvement of the prediction of the cleaning behaviour.
1 April 2016 in Tehnicki vjesnik - Technical Gazette
To meet consumer safety and high product quality there is a need of reliable cleaning processes in the food industry. To keep competitive position it is necessary to control costs of those cleaning in place (CIP) processes e.g. expenses...