4 April 2024 in Infrared Physics & Technology
18 March 2023 in Journal of Reinforced Plastics and Composites
This paper proposes a new algorithm to generate representative volume elements (RVEs) with random fiber distribution in fiber reinforced composites (FRC). The proposed algorithm is straightforward and easy to implement based on judging the maximum and minimum distances between a new fiber and existing fibers. The generation results demonstrate that the maximum fiber volume fraction gradually increases and oscillates violently before reaching 78.54% as the fiber radius rises. Moreover, with the increase of RVE size, the maximum fiber volume fraction changes gently when the fiber radius does not exceed 6.5 μm, but it changes dramatically at other fiber radii. Then, the fiber distributions of the generated RVEs are evaluated using the nearest neighbor distance, Ripley’s K function, and pair distribution function. The evaluation results indicate that the fiber distributions present randomness. Lastly, the effective elastic properties of the Carbon/Epoxy unidirectional FRC are predicted using the RVEs generated by the proposed algorithm, the RVEs generated by regularization, and the Mori–Tanaka method. It is found that the prediction using the RVEs generated by the proposed algorithm is more accurate than the regularization, compared with the Mori–Tanaka and experiment results. The proposed algorithm contributes to microstructure modeling in computational micromechanics.
1 March 2019 in Photonic Sensors
Aiming at the drawbacks of low contrast and high noise in the thermal images, a novel method based on the combination of the thermal image sequence reconstruction and the first-order differential processing is proposed in this work, which is comprised of the following procedures. Firstly, the specimen with four fabricated defects with different sizes is detected by using pulsed infrared thermography. Then, a piecewise fitting based method is proposed to reconstruct the thermal image sequence to compress the data and remove the temporal noise of each pixel in the thermal image. Finally, the first-order differential processing based method is proposed to enhance the contrast. An experimental investigation into the specimen containing de-bond defects between the steel and the heat insulation layer is carried out to validate the effectiveness of the proposed method via the above procedures. The obtained results show that the proposed method can remove the noise, enhance the contrast, and even compress the data reaching at 99.1%, thus improving the detectability of pulsed infrared thermography on metal defects.
1 January 2024 in Structural Control and Health Monitoring
The multiple intersecting stiffeners on the chemical milling stiffened panel (CMSP) limit the application of active health monitoring methods on it. An imaging algorithm based on electromechanical impedance (EMI) and probability‐weighting is proposed to achieve quantitative evaluation and localization of the damage on CMSP. The proposed algorithm compensates for the difference in sensor performance with coefficients and there is no need to determine the key parameters of the algorithm through prior experiments. In the paper, the applicability of ultrasonic guided wave (GW) and EMI on CMSP was first studied through the finite element method. Based on EMI and the mean absolute percentage deviation (MAPD), the selected damage indicator (DI), a probability‐weighted damage imaging algorithm are proposed and experimentally verified. The results indicate that due to the reflection and attenuation effects of stiffeners on GW, the signal characteristics of damage scattering waves are contaminated, making it difficult to quantitatively characterize the damage from GW signals through DIs. MAPD is positively correlated with the damage degree and has consistency in characterizing the signal of different PZTs under the same working condition. The feasibility and accuracy of the proposed algorithm are verified through experiments which show a strong engineering application capability.