Jiayu Hu

Jiayu Hu

Auto-generated profile, based on publicly available information

Jiayu Hu

State Key Laboratory of High-Efficiency and High-Quality Conversion for Electric Power, Hunan University, Changsha, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 December 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
RHRong Han
Rong Han
QXQianming Xu
Qianming Xu
HDHongqi Ding
Hongqi Ding
PGPeng Guo
Peng Guo
JHJiayu Hu
Jiayu Hu
ALAn Luo
An Luo
Power amplifiers have a wide range of applications in civilian and military areas. In this article, a modular multilevel switching power amplifier (MMSPA) with high power and high output performance is investigated. Due to mismatched parameters or proper control signals among the modules, there may be significant temperature differences among the modules of MMSPA under long-term operations. Uneven temperatures among modules directly lead to premature aging and failure, which in turn affects the overall system reliability. Aiming at the thermal stress imbalance among modules of MMSPA, a model predictive control based on the thermal stress balance is proposed. First, the mathematical model is constructed for the MMSPA. Then, the junction temperature estimation method based on the power loss calculation is presented. On this basis, the finite set control switch state optimization and the switch distribution algorithm for thermal balance are presented. Finally, the proposed active thermal control is verified by the simulation and the experimental results.

18 November 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
JHJiayu Hu
Jiayu Hu
QXQianming Xu
Qianming Xu
PGPeng Guo
Peng Guo
HWHongliang Wang
Hongliang Wang
ZHZhixing He
Zhixing He
ALAn Luo
An Luo
Soft switching technology is an effective way to reduce the switching loss of the single-phase inverter to improve efficiency. Because of the ease of implementing soft switching, inverter works in boundary conduction mode (BCM) is widely used. On the contrary, BCM causes wide variation in switching frequency and large inductor current ripple. In this article, a fixed switching frequency hybrid modulation method for the inverter is proposed, which can achieve zero-voltage switching without changing the switching frequency and reduce the peak value of inductor current. The modulation achieves good tracking of the output current with different loads by switching mode between the triangular mode and the trapezoidal mode accurately. For implementing modulation, the operation states of the inverter with different conditions are analyzed in detail, the number of operation states is deduced and the state machine about mode switching is summarized. In addition, a single-phase inverter prototype is designed to verify the feasibility and effectiveness of the proposed modulation. Compared with BCM, the efficiency of the inverter at both light load and full load is increased.

26 July 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
JZJiakui Zhang
Jiakui Zhang
QXQianming Xu
Qianming Xu
PGPeng Guo
Peng Guo
NMNan Mo
Nan Mo
JHJiayu Hu
Jiayu Hu
ALAn Luo
An Luo
In this article, a multiplexed active clamp high-frequency link inverter (MACHFLI) with de–re-coupling frequency doubling modulation (DFDM) is proposed. The proposed MACHFLI consists of a primary inverter, a high-frequency transformer, a multiplexed active clamp (MAC) circuit, and a cycloconverter. The MAC recycles leakage inductance energy and eliminates voltage spikes caused by leakage inductance. Overlapping commutation is designed in the DFDM to ensure the safe commutation of the output filter inductor current and realize the zero-voltage switching (ZVS) of the cycloconverter. The ZVS of the primary inverter can be realized utilizing magnetizing current, and the full-range ZVS of MAC can also be realized with turn- on delay. The operating principle and ZVS conditions of the proposed MACHFLI are analyzed, and the design of the transformer and clamp capacitor is discussed in this article. Finally, a 1-kW prototype is made to verify the analysis results. Experimental results show that MACHFLI has four-quadrant operation capability, good dynamic response, high efficiency over a wide load range, and its peak efficiency reaches 95.4%.

16 July 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZQZhuo Qing
Zhuo Qing
PGPeng Guo
Peng Guo
QXQianming Xu
Qianming Xu
JHJiayu Hu
Jiayu Hu
PCPenghui Chen
Penghui Chen
ALAn Luo
An Luo
Wide-bandgap semiconductor devices are widely used in power electronic systems for their high switching speed and frequency characteristics, which enhance power density and output fidelity, but also cause serious common-mode (CM) electromagnetic interference (EMI) issues. Balance technique is a promising method due to its significant CM noise suppression ability and high-power density. However, conventional balance techniques are typically constructed with additional inductors and front input grounding parasitic capacitors, which the high-frequency impedance of the former is affected by the equivalent parallel capacitances while the latter is sensitive to variations of front input circuits. To solve the aforementioned issues, an improved balance technique considering input parasitic inductor is proposed in this article. First, the CM EMI model and propagation paths of a dc–ac converter are analyzed. Second, a Wheatstone bridge is constructed with input parasitic inductor. Then, additional capacitors are introduced to achieve the balance condition. Furthermore, the effect of parasitic parameters of the additional CM current path on the CM reduction performance is investigated. Finally, the effectiveness of the proposed method is verified through simulation and experiments.

12 September 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
NMNan Mo
Nan Mo
JHJiayu Hu
Jiayu Hu
QXQianming Xu
Qianming Xu
PGPeng Guo
Peng Guo
JLJiayun Liu
Jiayun Liu
ALAn Luo
An Luo
In the dual active bridge-based single-stage (DAB-1S) ac–dc converter, the varying input power causes a variation in the phase shift ratios, resulting in varying initial current and the generation of dc-bias current (DCBC). The DCBC will aggravate current stress and increase conduction loss, etc. This article introduces an initial current control method of DAB-1S ac–dc converter to eliminate the DCBC. The introduction of control degrees of freedom that are independent of power control enables the initial current of each switching cycle to be controlled to zero in any modulation mode. In this manner, the currents of neighboring switching cycles are decoupled, thereby eliminating the DCBC. Moreover, the impact of nonideal parameters in practical DAB 1S ac–dc converters is analyzed, and corresponding compensation methods are proposed. Meanwhile, mathematical analysis of the switching cycles and grid cycles indicates that this method only changes the initial phase angle of the voltage and current for each switching cycle, leaving the harmonic content of the port current unchanged and the total harmonic distortion of the grid current unaffected. The experimental prototype has confirmed the effectiveness of the dc bias elimination method. Comparative experimentation with various other existing modulation methods highlights the superiority of this method.

17 November 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
CTCheng Tang
Cheng Tang
QXQianming Xu
Qianming Xu
PGPeng Guo
Peng Guo
JHJiayu Hu
Jiayu Hu
JZJiakui Zhang
Jiakui Zhang
ALAn Luo
An Luo
High switching frequency grid-connected converters are widely used in renewable energy generation, which is prone to cause serious broadband oscillation. The broadband impedance measurement device with low total harmonic distortion (THD) is an effective means to analyze the stability of grid-connected system. This article proposes a low-carrier-ratio model predictive control (LCR-MPC) for 100 kHz lager-signal multiphase converters with low THD. Compared to the conventional low-carrier-ratio methods with huge offline calculation burden, the proposed LCR-MPC can calculate the switching angles online with a low calculation burden. First, the fast selection of optimal state and the online calculation of initial switching angles are proposed. Then, a finite set of switching angles is constructed by the virtual carriers to meet constraints. The finite set is used by MPC for online calculation with low THD. Finally, the performance of LCR-MPC is verified by comparing simulation and experimental results with carrier phase shift pulsewidth modulation (CPS-PWM) and optimized pulse patterns for a six-phase converter. Compared with CPS-PWM, the average THD improvement of the proposed method is 4.45% at a carrier ratio of 6.